1960—2008年南方地区冰冻时空分布特征

利用地基多普勒天气雷达数据,提出机载雷达扫描的模拟仿真算法,并建立了仿真扫描的理论模型。该模型利用数据分层几何投影,处理速度较快、精度较高,可应用于扇形扫描和圆锥扫描。在理想情况下,设计了消除地物回波的算法及多普勒速度退模糊的算法。试验表明,仿真回波可应用于机载气象雷达实际观测前的扫描方式可行性研究,有助于分析机载雷达探测的云雨回波特性。     

三峡重庆库区深部地球物理特征与断裂构造

为了深入研究三峡重庆库区岩石圈动力学特征及其对断裂构造活动的控制和影响．并为之提供基础资料，为三峡重庆库区地震、地质灾害的监测与防治提供基础依据，在已有地球物理资料的基础上，从综合地球物理研究角度出发，通过实测地震测线资料的再解释．采用新的处理技术方法，对本区的东西向主剖面和南北向支测线的地震测深资料进行二维射线追踪处理、Pg波成像；选用场分离技术、位移数字成像技术重新处理了重力和航磁资料，通过联合反演来建立深部二维构造剖面，对剖面所揭示的基底构造特征和地壳结构特征、主要断裂构造特征以及莫霍面的起伏特征进行了精细分析和细致研究．从地球物理平面场特征出发建立了岩石圈构造三维框架。研究结果表明，这样的研究思路准确、方法得当．结论可靠；沿该剖面，把可解译的断裂分为Ⅲ级：Ⅰ级为超岩石圈断裂；Ⅱ级为壳断裂；Ⅲ级为盖层断裂。依据地球物理特征，准确揭示了库区的断裂构造特征，达到了预期效果。     

半自动机载LiDAR点云建筑物三维重建方法

针对全自动建筑物3D重建存在需要后续人工检验,且发现重建错误需要花费额外时间修改的问题,提出了一种半自动的面向对象的机载LiDAR点云建筑物3D重建方法。基于建筑物类别点云的联通分析和平面生长分割结果,提出了自动的建筑物栋数检测、单栋建筑物外轮廓提取、单栋建筑物内部结构线提取方法;同时,在计算机无法完成部分工作时,人工辅助计算机完成高程阶越线提取、识别建筑物屋顶附属物点云等工作。实验证明,该方法可以适用于高密度机载LiDAR点云数据中城区大部分建筑物的3D模型重建。     

С����߶ȷֽ��ڵ���Ԥ���е�Ӧ��

??????С?????????????????????1994~1995??2002~2003???2011~2012????????????????仯???з??????1995-07-22????Ms5.8??????2003-10-25????Ms6.1???????2012-05-11????Ms4.9??????????????????о?С???????????????????????á?4??С?????????3?ε???????????????????仯???????????????????????4??С?????????и?????????????????????С??????????ж?????Σ??????     

Key signatures of turbidite and sandy debris and core examples in Liaohe Basin

Gravity flow is a widely-distributed fluid type in nature. Various classification schemes of gravity flow are proposed by different researchers from different viewpoints. The scheme of turbidity flow and debris flow is adopted in this paper. The sedimentary characteristics of turbidite and sandy debrite are summarized and discussed to clarify most typical facies marks of these two rock types. The study shows that turbidite and sandy debris can be identified by the following typical characteristics during the outcrop and core observation: If the graded bedding is developed in sandstone,it should be identified as turbidite;if the muddy rip-up clast or no bedding structure(massive sandstone)is developed in sandstone,it should be identified as sandy debris. These characteristics are the most reliable signatures to distinguish turbidite and sandy debris. In addition,some other sedimentary structures such as deformation bedding,climbing ripple cross bedding,wavy bedding,parallel bedding,scouring surface,lithologic abrupt interface,and flute cast also have certain indicative significance. It is necessary to make a comprehensive judgment based on the sedimentary background,vertical combination of lithofacies,geophysics and other materials when these characteristics are presented in the study.     

海洋岩石圈板块有效弹性厚度研究

本文在前人研究大陆岩石圈板块有效弹性厚度的基础上,建立研究海洋岩石圈板块有效弹性厚度的理论模型,推导出与大陆岩石圈不同的海洋岩石圈板块响应函数 Z(k,Te) 理论计算公式.并分析海洋岩石圈板块响应函数 Z(k,Te) 的特点.文中对实际的海洋测量数据的响应函数 Z(k,Te) 进行计算和分析,估算我国南海南沙海域和南海中央海盆岩石圈板块有效弹性厚度分别约为10 km和6~7 km.     

基于实测与模拟的青海湖冰厚时空变化特征

湖冰厚度是湖泊在封冻期的重要物理参数,明晰其时空变化特征对于认识气候变暖背景下的湖冰响应规律具有重要的理论价值和现实意义.基于ERA5 Climate Reanalysis气温数据集、MODIS MOD09GQ数据产品和2019年湖冰钻孔测厚数据及雷达测厚数据,重建20002019年青海湖冰厚时间序列并分析其时空变化特...     

3D gravity modelling for Anyongbok Seamount in the East Sea

A seamount chain with an approximately WNW trend is observed in the northeastern Ulleung Basin. It has been argued that these seamounts, including two islands called Ulleung and Dok islands, were formed by a hotspot process or by ridge related volcanism. Many geological and geophysical studies have been done for all the seamounts and islands in the chain except Anyongbok Seamount, which is close to the proposed spreading ridge. We first report morphological characteristics, sediment distribution patterns, and the crustal thickness of Anyongbok Seamount using multibeam bathymetry data, seismic reflection profiles, and 3D gravity modeling. The morphology of Anyongbok Seamount shows a cone shaped feature and is characterized by the development of many flank cones and flank rift zones. The estimated surface volume is about 60 km³, and implies that the seamount is smaller than the other seamounts in the chain. No sediments have been observed on the seamount except the lower slope, which is covered by more than 1,000 m of strata. The crustal structure obtained from a 3D gravity modeling (GFR = 3.11, SD 3.82 = mGal) suggests that the seamount was formed around the boundary of the Ulleung Plateau and the Ulleung Basin, and the estimated crustal thickness is about 20 km, which is a little thicker than other nearby seamounts distributed along the northeastern boundary of the Ulleung Basin. This significant crustal thickness also implies that Anyongbok Seamount might not be related to ridge volcanism.