Thermodynamic Modelling of Ore-Forming Mechanism of the Changkeng Gold-Silver Deposits in Guangdong Province

The Changkeng gold-silver deposits consist of a sediment-hosted, disseminated gold deposit and a replacement-type silver deposit. The mineralizations of gold and silver are zoned and closely related to the silicification of carbonate and clastic rocks, so that siliceous ores dominate in the deposit. The mineralizing temperature ranges mainly from 300 to 170℃, and K+, Na+, Ca2+, Mg2+, and Cl- are the major ions in the ore-forming fluid. Calculations of distribution of metal complexes show that gold is mainly transported by hydrosulphide complexes, but chloride complexes of silver, iron, lead, and zinc, which are transformed into hydroxyl and hydrosulphide complexes under neutral to weak-alkaline circumstances in the late stage, predominate in the ore-forming solutions. Water-rock interaction is confirmed to be the effective mechanism for the formation of silver ores by computer modelling of reaction of hydrothermal solution with carbonate rocks. The solubility analyses demonstrate that the precipitation     

筒桩基础的地震反应分析

本文基于Biot动力固结方程，在BDWF模型的基础上，通过等价线性迭代不断修正土体模量以逼近土体的非线性动态响应，对建筑筒桩基础的地震反应进行了动力分析。为了分析筒桩基础的地震反应，考虑桩-土-结构的动力相互作用，将桩-土-结构地震反应分析的空间体系简化为二维问题计算。结果表明，筒桩基础桩基相对桩基于桩基有较好的抗震性能，筒桩基础的柔性改善了结构的基本周期。     

Interactive behavior of soil–pile-superstructure system in transient state to liquefaction by means of large shake table tests

Shaking table tests were conducted by means of a large-scale laminar box with 4 m in length, 2 m in width and 2 m in height in order to investigate behavior of a soil-pile-superstructure system in liquefiable ground. A model two-storey structure, supported by a pile group, was set in a saturated sand deposit, and subjected to a sinusoidal base motion with increasing amplitude. Discussions are focused on the transient behavior until soil liquefaction occurs. Main interests are characteristics of springs used in a sway-rocking model and a multi-freedom lumped mass (MFLM) model that are frequently used in soil–pile interaction analysis. The spring constant in the sway-rocking model is represented by restoring force characteristics at the pile head, and that in the MFLM system is represented by an interaction spring connecting the pile to the free field. The transient state prior to soil liquefaction is shown to be important in the design of a pile because dynamic earth pressure shows peak response in this state. The reduction of the stiffness due to excess porewater generation and strain dependent nonlinear behavior is evaluated.     

In-plane and anti-plane strong shaking of soil systems and structures

The concept of in-plane and anti-plane shaking is introduced with a rigid block on a plane surface with Coulomb friction. Using a hypoplastic constitutive relation to model the mechanical behaviour of the soil, numerical solutions for a rigid block on a thin dry or saturated soil layer are obtained. The coupled nature of dynamic problems involving granular materials is shown, i.e. the motion of the block changes the soil state—skeleton stresses and density—which in turn affects the block motion. Motions of the block as well as soil response can be more realistically calculated by the new model. The same constitutive equation is applied to the numerical simulation of the propagation of plane waves in homogeneous and layered level soil deposits induced by a wave coming from below. Experiments with a novel laminar shake box as well as real seismic records from well-documented sites during strong earthquakes are used to verify the adequacy of the hypoplasticity-based numerical model for the prediction of soil response during strong earthquakes. The response of a homogeneous earth dam subjected to in-plane and anti-plane shaking is investigated numerically. In-plane and anti-plane shaking is shown to cause nearly the same spreading of a sand dam under drained conditions, whereas under undrained conditions anti-plane shaking causes stronger spreading of the dam. The dynamic behaviour of a breakwater founded on rockfill and soft clay during the 1995 Kobe earthquake is back-calculated to show the good performance of the proposed numerical model also with a structure. Section 9 deals with buildings on mattresses of densified cohesionless soils or fine-grained soils with granular columns, slopes with ‘hidden’ dams and structures on piles traversing clayey slopes to show the suitability of hypoplasticity-based models for the earthquake-resistant design and safety assessment of geotechnical systems.     

土参数对桩基水平响应影响的研究

桩基的水平响应由桩土间的相互作用决定,通过采用p-y曲线来表示桩土间的非线性相互作用。通过算例,讨论分析了粘性土参数的变化对p-y曲线中土体的极限强度和刚度、桩基水平位移和弯矩分布及最大弯矩和水平荷载关系的影响。     

The Role of Pre-existing Structures in the Origin, Propagation and Architecture of Faults in the Main Ethiopian Rift

Four major fault systems oriented N–S to NNE–SSW, NE–SW, E–W and NW–SE are identified from Landsat Thematic Mapper (TM) images and a high resolution digital elevation model (DEM) over the Ethiopian Rift Valley and the surrounding plateaus. Most of these faults are the result of Cenozoic - extensional reactivation of pre-existing basement structures. These faults interacted with each other at different geological times under different geodynamic conditions. The Cenozoic interaction under an extensional tectonic regime is the major cause of the actual volcano-tectonic landscape in Ethiopia. The Wonji Fault Belt (WFB), which comprises the N–S to NNE–SSW striking rift floor faults, displays peculiar propagation patterns mainly due to interaction with the other fault systems and the influence of underlying basement structures. The commonly observed patterns are: curvilinear oblique-slip faults forming lip-horsts, sinusoidal faults, intersecting faults and locally splaying faults at their ends. Fault-related open structures such as tail-cracks, releasing bends and extensional relay zones and fault intersections have served as principal eruption sites for monogenetic Plio-Quaternary volcanoes in the Main Ethiopian Rift (MER).     

Active faulting at the Eurasian, North American and Pacific plates junction

The active faults known and inferred in the area where the major Pacific, North American and Eurasian plates come together group into two belts. One of them comprises the faults striking roughly parallel to the Pacific ocean margin. The extreme members of the belt are the longitudinal faults of islands arcs, in its oceanic flank, and the faults along the continental margins of marginal seas, in its continental flank. The available data show that all these faults move with some strike-slip component, which is always right-lateral. We suggest that characteristic right-lateral, either partially or dominantly, kinematics of the fault movements has its source in oblique convergence of the Pacific plate with continental Eurasian and North American plates. The second belt of active faults transverses the extreme northeast Asia as a continental extension of the active mid-Arctic spreading ridge. The two active fault belts do not cross but come close to each other at the northern margin of the Sea of Okhotsk marking thus the point where the Pacific, North American and Eurasian plates meet.     

海洋平流的季节变化对La Nia事件成熟位相锁定的作用

用一个中等复杂程度的热带海气耦合模式模拟LaNi na事件成熟位相锁定在年底左右的特征并研究其形成的机制。结果表明 ,模式能很好地模拟观测到的LaNi na事件成熟位相锁定在年底左右的特征。LaNi na事件成熟位相锁定在年底主要由海洋气候基本态引起。海洋垂直平均流是LaNi na事件成熟位相锁定在年底左右的最主要因子。由海洋气候基本态的季节变化所引起的冷平流的季节变化是LaNi na事件成熟位相锁定在年底的机制。在LaNi na事件期间 ,1～ 5月份 ,赤道中东太平洋地区的冷平流较弱 ,它不能平衡海气热量交换过程的影响 ,因而海洋表面温度增加。这一过程使海气耦合不稳定度减弱 ,从而使LaNi na事件衰减。 6～ 12月份 ,赤道中东太平洋地区的冷平流较强。海气热量交换过程的影响不能平衡较强冷平流的影响 ,因而海洋表面温度减小。这一过程使海气耦合不稳定度加强 ,从而使LaNi na事件发展。这样 ,LaNi na事件成熟位相容易出现在年底左右。     

A 3D BEM-FEM methodology for simulation of high speed train induced vibrations

This work presents an efficient methodology for the analysis of vibrations in a railroad track system, induced by the passage of conventional and high-speed trains. To this end the Boundary Element Method is used to model the soil-tie system within the framework of impulse response techniques. Conventional Finite Element Methods along with Newmark's integration is used for the modeling of the rail system. The two methods are coupled at the tie-rail interface and the solution is obtained following a staggered, time marching scheme in an efficient manner. The methodology accounts for Soil-Structure Interaction and traveling wave effects. In addition, this work identifies the parameters that affect the efficient modeling of railroad track systems as they pertain to the proposed solution methodology.     

Effects of inertial and kinematic interaction on seismic behavior of pile with embedded foundation

Effects of inertial and kinematic forces on pile stresses are studied based on large shaking table tests on pile-structure models with a foundation embedded in dry and liquefiable sand deposits. The test results show that, if the natural period of the superstructure, T_b, is less than that of the ground, T_g, the ground displacement tends to be in phase with the inertial force from the superstructure, increasing the shear force transmitted to the pile. In contrast, if T_b is greater than T_g, the ground displacement tends to be out of phase with the inertial force, restraining the pile stress from increasing. With the effects of earth pressures on the embedded foundation and pile incorporated in, pseudo-static analysis is conducted to estimate maximum moment distribution in pile. It is assumed that the maximum moment is equal to the sum of the two stresses caused by the inertial and kinematic effects if T_b<T_g or the square root of the sum of the squares of the two if T_b>T_g. The estimated pile stresses are in good agreement with the observed ones regardless of the occurrence of soil liquefaction.