Three-dimensional inversion of marine magnetic anomalies: Implications for crustal accretion along the Mid-Atlantic Ridge (28°–31°30′ N)

We present magnetic field data collected over the Mid-Atlantic Ridge in the vicinity of the Atlantis Fracture Zone and extending out to 10 Ma-old lithosphere. We calculated a magnetization distribution which accounts for the observed magnetic field by performing a three-dimensional inversion in the presence of bathymetry. Our results show the well-developed pattern of magnetic reversals over our study area. We observe a sharp decay in magnetization from the axis out to older lithosphere and we attribute this decay to progressive low temperature oxidation of basalt. In crust which is 10 Ma, we observe an abrupt increase in magnetic field intensity which could be due to an increase in the intensity of magnetization or thickness of the magnetic source layer. We demonstrate that because the reversal epoch was of unusually long duration, a two-layer model comprised of a shallow extrusive layer and a deeper intrusive layer with sloping polarity boundaries can account for the increase in the amplitude of anomaly 5. South of the Atlantis Fracture Zone, high magnetization is correlated with bathymethic troughts at segment end points and lower magnetization is associated with bathymetric highs at segment midpoints. This pattern can be explained by a relative thinning of the magnetic source layer toward the midpoint of the segment. Thickening of the source layer at segment endpoints due to alteration of lower oceanic crust could also cause this pattern. Because we do not observe this pattern north of the fracture zone, we suggest it is a result of the nature of crustal formation process where mantle upwelling is focused. South of the fracture zone, reversals along discontinuity traces only continue to crust 2 Ma old. In crust >2 Ma, we observe bands of high, positive magnetization along discontinuity traces. We suggest that within the discontinuity traces, a high, induced component of magnetization is produced by serpentinized lower crust/upper mantle and this masks the contribution of basalts to the magnetic anomaly signal.     

Paleomagnetic studies of the Late Mesozoic deformation stage in the southern Primorye region

The analysis of paleomagnetic data available for the southern Primiorye region revealed that the studied objects were magnetized under regional remagnetization presumably during the Late Mesozoic folding and this magnetization can be interpreted as being synfolding. The interpretation is based on the parameter that characterizes the folding completion degree immediately before regional remagnetization. It is shown that the relaxation of Late Mesozoic horizontal stresses was irregular. The obtained estimates of the degree of folding completion are consistent with the available geological data and Talitskii’s model for tectonic deformations.     

Periodicities in natural remanent magnetization and palaeoclimatic records detected by walsh spectra

The time series consisting of nonsinusoidal Natural Remanent Magnetization (NRM) and palaeoclimatic variations for the past two million years have been spectrally examined by using a new Walsh transform technique. The results show statistically significant periodicities (at 95% confidence level) of approximately 92,000 years; 43,000 years and 21,000 years in the ensemble spectra of the NRM intensity (mineralogic) variations. These NRM periodicities are remarkably close to the well-known Milankovitch cycles. The ensemble spectra of palaeoclimatic records reveal only 41,000 years statistically significant (95%) periodicity corresponding to the obliquity cycle. The study suggests that NRM variations in deep sea sediments probably are more sensitive recorders of palaeoclimatic memory than the oxygen isotope variations.     

Gravity and magnetic signatures of volcanic plugs related to Deccan volcanism in Saurashtra, India and their physical and geochemical properties

The Bouguer anomaly and the total intensity magnetic maps of Saurashtra have delineated six circular gravity highs and magnetic anomalies of 40-60 mGal (10⁻⁵m/s²) and 800-1000 nT, respectively. Three of them in western Saurashtra coincide with known volcanic plugs associated with Deccan Volcanic Province (DVP), while the other three in SE Saurashtra coincide with rather concealed plugs exposed partially. The DVP represents different phases of eruption during 65.5±2.5 Ma from the Reunion plume. The geochemical data of the exposed rock samples from these plugs exhibit a wide variation in source composition, which varies from ultramafic/mafic to felsic composition of volcanic plugs in western Saurashtra and an alkaline composition for those in SE Saurashtra. Detailed studies of granophyres and alkaline rocks from these volcanic plugs reveal a calc-alkaline differentiation trend and a continental tectonic setting of emplacement. The alkaline plugs of SE Saurashtra are associated with NE-SW oriented structural trends, related to the Gulf of Cambay and the Cambay rift basin along the track of the Reunion plume. This indicates a deeper source for these plugs compared to those in the western part and may represent the primary source magma. The Junagadh plug with well differentiated ring complexes in western Saurashtra shows well defined centers of magnetic anomaly while the magnetic anomalies due to other plugs are diffused though of the same amplitude. This implies that other plugs are also associated with mafic/ultramafic components, which may not be differentiated and may be present at subsurface levels. Paleomagnetic measurements on surface rock samples from DVP in Saurashtra suggest a susceptibility of 5.5×10⁻² SI units with an average Koenigsberger ratio (Q_n) of almost one and average direction of remanent magnetization of D=147.4° and I=+56.1°. The virtual geomagnetic pole (VGP) position computed from the mean direction of magnetization for the volcanic plugs and Deccan basalt of Saurashtra is 30°N and 74°W, which is close to the VGP position corresponding to the early phases of Deccan eruption. Modeling of gravity and magnetic anomalies along two representative profiles across Junagadh and Barda volcanic plugs suggest a bulk density of 2900 and 2880 kg/m³, respectively and susceptibility of 3.14×10⁻² SI units with a Q_n ratio of 0.56 which are within the range of their values obtained from laboratory measurements on exposed rock samples. The same order of gravity and magnetic anomalies observed over the volcanic plugs of Saurashtra indicates almost similar bulk physical properties for them. The inferred directions of magnetization from magnetic anomalies, however, are D=337° and 340° and I=−38° and −50° which represent the bulk direction of magnetization and also indicate a reversal of the magnetic field during the eruption of these plugs. Some of these plugs are associated with seismic activities of magnitude ≤4 at their contacts. Based on this analysis, other circular/semi-circular gravity highs of NW India can be qualitatively attributed to similar subsurface volcanic plugs.     

Three-dimensional Rayleigh hysteresis of oriented core samples from the German Continental Deep Drilling Program: susceptibility tensor, Rayleigh tensor, three-dimensional Rayleigh law

Rayleigh hysteresis, as defined by the well-known Rayleigh relations, has been observed not only when magnetization of pyrrhotite-bearing KTB-samples is measured in parallel to a weak dc magnetic field, but also in experiments where field and measuring directions have been adjusted strictly perpendicularly to each other. Nine-tupels of independent Rayleigh hysteresis loops could thus be compiled. Their characteristic coefficients X ^ijk of initial susceptibility together with the Rayleigh loss coefficients α^jk have been proved to determine completely the samples' weak-field magnetic anisotropy. Interpreting the coefficient matrices ( X ^ijk) and (α^jk) as the tensor of initial susceptibility and the Rayleigh tensor, respectively, generalization of the isotropic Rayleigh relations in terms of corresponding tensor relationships has been suggested for the anisotropic case. Application to the KTB samples showed 3-D Rayleigh hysteresis measurements to be an excellent tool for rock magnetic analysis in terms of ore content and crystalline texture. In particular, a magnetocrystalline double texture of the basal planes of pyrrhotite precipitates and their [1120] directions of easy magnetization have been clearly detected. Surprisingly, the welt-known theorem α= const. X ²_I, formulated by Néel (1942) for the isotropic case, has been found to hold true even in tensor generalization (α_jk) = const ( X ²_jk). To reach sufficient resolution for the measurements performed, a sensitive vibrating coil magnetometer (VCM) has been developed.     

Automated AF-demagnetization on the 2G-Enterprises through-bore,cryogenic magnetometer

Since the early sixties, alternating field demagnetization (AFD) has been a standard laboratory technique for demagnetizing rocks to expose the multicomponent structure of their natural remanent magnetization (NRM). In the majority of AFD implementations, however, the procedure remains as labour-intensive as ever. The implementation that we have developed at the Australian Geological Survey Organisation, automates the procedure for AFD based on the static method, and results in significant productivity and efficiency gains without compromising data quality. A properly formulated procedure for static AFD may be the only method of retrieving higher-coercivity components of natural remanence in samples prone to developing gyroremanence at higher alternating fields (AFs). Our AFD environment comprises: a 2G-Enterprises through-bore, cryogenic magnetometer; 2G AF-coils and control equipment; and personal computer software, developed by us, to control all procedural aspects for a complete AFD of a sample including, importantly, a counteracting procedure to neutralize the effects of gyroremanence build-up at higher AFs. With our system, AFD of 8 samples/day, each of 20+ steps, requires only 20 min of user attention compared with a full day for conventional systems.     

原位磁化X射线粉末衍射法测还原铁粉的微观磁致伸缩系数

首次报导X射线粉末衍射法测量铁粉晶胞的磁致伸缩系数。还原铁粉样品原位磁化后 ,铁立方晶胞产生磁致伸缩效应 ,晶胞参数的变化引起衍射峰位置和晶面间距的变化。实验测得铁晶胞λ1 0 0 为 3 .3 3× 10 - 4,此结果表明铁晶胞的微观磁致伸缩系数比棒状、薄膜或粉末压片的系数大约 16倍。对此现象进行了合理的理论解释 ,指出大块材料中的粉末多晶之间具有较大的空隙 ,从而使得宏观磁致伸缩系数变小     

Magnetic domain structures and stray fields of individual elongated magnetite grains revealed by magnetic force microscopy (MFM)

In order to clarify the relationship between microscopic and macroscopic magnetic features of a rock, we applied magnetic force microscopy (MFM) as a local probe on a sample with an intense natural remanent magnetisation, a norite from Heskestad, Norway. We studied in detail seven magnetite (Fe₃O₄) exsolution lamellae, five of them were about 30 μm long and a few micrometers wide, two were significantly shorter; all were located in their natural host, a grain of clinopyroxene. By combining MFM images of surface magnetisation with information about shape observed with optical microscopy (OM), the internal domain structure was determined for individual grains. In general, the lamellae were pseudo-single-domain grains with open-flux domain magnetisations parallel to their long axes. The domain sizes were, in cross-section, on the order of a micrometer for the longer lamellae and about 300 nm for the short lamellae. By increasing the separation between the MFM probe and the exposed end of the lamellae, information could be obtained about the decrease in stray fields for the individual grains. Close to the lamellae, stray fields were significant even for grains with multiple domains. The largest fields were found above the largest domains. A separation of approximately one domain width was found to be a characteristic distance, where stray fields from adjacent domains begin to cancel one another.     

河北省物理地层界线厘定

以现代地层学多重划分为理论依据,以岩石地层单元组的密度、磁化率、剩余磁化强度及厚度加权算术平均值等物性参数为研究对象,以有序地质量最优分割方法为数学手段,进行河北省全区综合地层柱物理地层界线的厘定,并对其地质意义进行了初步讨论。