蛋白核小球藻在废水污泥中培养的研究

啤酒厂废水污泥中含有一定的营养元素和活性物质。本研究利用废水污泥培养蛋白核小球藻（Chlorellapyrenoidosa）取得了初步结果。将一定比例的活性污泥掺入普通培养液形成混合培养基,其中80：20试验组无论从蛋白核小球藻的生物量还是粗蛋白的含量均与普通培养基的培养产物近似,具有实践意义。结果表明,混合培养基培养某些藻类,不仅降低了养殖成本,还可净化环境,为废水污泥用于藻类养殖开辟了一条新途径。     

活性污泥和颗粒污泥生物吸附废水中Pb~(2+)的对比研究

采用序批式实验,分别以活性污泥和颗粒污泥为吸附材料,考察接触时间、pH等因素对废水中Pb2+生物吸附效果的影响.结果表明,活性污泥和颗粒污泥对低浓度Pb2+(0～20 mg/L)能在30 min内达到吸附平衡,当Pb2+浓度在20～100 mg/L时,浓度越低,达到平衡时间越快,以被动吸附为主.在Pb2+低浓度条件下(0～20 mg/L),初始pH为4～5时,Pb2+的去除率达99%以上,且初始pH值是影响活性污泥和颗粒污泥生物吸附Pb2+的重要因素.活性污泥和颗粒污泥对Pb2+的生物吸附符合朗缪尔(Langmuir)方程,在pH为4及25 ℃下,活性污泥饱和吸附量为59.88 mg/g,颗粒污泥饱和吸附量为80.65 mg/g.因此,活性污泥和颗粒污泥可作为有效的生物吸附剂处理低浓度(0～20 mg/L)含铅废水,且颗粒污泥比活性污泥的生物吸附效果好.     

Internal erosion of chemically reinforced granular materials: a mathematical modeling approach

Internal erosion (IE) affects the stability of natural and reinforced materials by causing instability within their granular structure. The dislodgement and transport of eroded particles affect both the particulate concentration of eroding fluid and the pore network of eroded material. In this study, we examined these modifications using a transport model with a finite element code. First, IE tests on chemically reinforced sand columns were performed to obtain information about eroded material loss of mass, particulate concentration of effluent, porosity and permeability modifications, and existing IE stages. Second, based on experimental results, a mathematical one‐dimensional model has been formulated to monitor the evolution and spatial distribution of erodible solids, fluidized particles, porosity, permeability, and seepage stresses. The model consists of a set of coupled nonlinear differential equations solved in sequence. It provides valuable information about the extent and the dynamics of structural changes, which can be used to estimate an IE time for the hydraulic work to reach failure. Copyright © 2011 John Wiley & Sons, Ltd.     

The management of sewage sludge by the water industry in England and Wales

Summary The legislative framework within which the disposal of sewage sludge is managed in England and Wales and the methods employed are outlined. Those factors which affect management decisions are analysed and consideration is given to the environmental implications of those decisions. Sewage processes and sludge disposal are considered, and the problems, especially those of heavy metal contamination, are addressed. An indication is given as to how the Water Services Companies are likely to implement the more stringent controls on disposal. Finally, the future of sludge management in England and Wales is discussed.Abbreviations BAT Best available technology - BATNEEC Best available technology not entailing excessive cost - BOD₅ Biochemical oxygen demand - BPEO Best practicable environmental option - CBI Confederation of British Industry - CEST Centre for Exploitation of Science and Technology - COD Chemical oxygen demand - CSC Customer Services Committee - DAF Dissolved air flotation - DG Director General - DoE Department of the Environment - DS Dried solids     

Flow and deposition of pyroclastic granular flows: A type example from the 1975 Ngauruhoe eruption,New Zealand

Small-volume pyroclastic density currents (PDCs) are generated frequently during explosive eruptions with little warning. Assessing their hazard requires a physical understanding of their transport and sedimentation processes which is best achieved by the testing of experimental and numerical models of geophysical mass flows against natural flows and/or deposits. To this end we report on one of the most detailed sedimentological studies ever carried out on a series of pristine small-volume PDC deposits from the 1975 eruption of Ngauruhoe volcano, whose emplacement were also witnessed during eruption. Using high-resolution GPS surveys, a series of lateral excavations across the deposits, and bulk sedimentological analysis we constrained the geomorphology, internal structure and texture of the deposits with respect to laterally varying modes of deposition.     

A note on permeability changes in geologic material due to stress

Summary Stress produces framatic changes in fluid permeability of geologic materials. An increase of nearly threefold occurred in granite at high stress, an increase of 20 percent in sandstone, and a hundredfold decrease in compacted sand. Permeability of sand and sandstone did not follow the effective stress law. Flow along joints was very sensitive to effected stress changes, a fourfold change being caused by as little as 1.0 MPa.     

Multiscale approach to geo‐composite cellular structures subjected to rock impacts

Geo‐composite cellular structures are an efficient technological solution for various applications in civil engineering. This type of structure is particularly well adapted to resisting rockfalls and can act as a defensive structure. However, the design of such structures is for the most part empirically based; this lack of research‐based design stagnates optimization and advanced development. In this paper, the mechanical behaviour of a geo‐composite cellular structure is investigated using a multi‐scale approach, from the individual cell made up of an assembly of rocky particles contained in a wire netting cage to the entire structure composed of a regular array of cells. Based on discrete modelling of both the cell and structure scales, a computational tool has been developed for design purposes. Copyright © 2007 John Wiley & Sons, Ltd.     

Discrete modelling of time‐dependent rockfill behaviour

This modelling study deals with the time‐dependent behaviour of rockfill media, which is of particular interest during the life of rockfill dams. Breakage of rock blocks and crack propagation are the main processes responsible for rockfill creep and collapse. The modelling procedure presented here is performed on two scales: on the rock block scale, where the grain is taken to be an assembly of rigid particles initially endowed with cohesive bonds, and on the rockfill scale, which is taken to involve a set of breakable grains interacting via contact and friction processes. The grain breakage process is described in term of a thermodynamically consistent damage interface model, where the damage is a gradual delayed process. This model was implemented in a non‐smooth contact dynamics code. The effects of the main parameters involved were analysed by performing numerical studies. The ability of the model to predict the creep behaviour of rockfill media is confirmed by presenting several simulations. Copyright © 2008 John Wiley & Sons, Ltd.     

Heavy metal contamination in western Xiamen Bay sediments and its vicinity, China

Concentrations of selected heavy metals (Cu, Pb, Zn, Cd, Cr, Ni and Fe) in surface sediments from nine sites in western Xiamen Bay and its vicinity were studied in order to understand current metal contamination due to urbanization and economic development in Xiamen, China. The sediment samples were collected in December 2004 and July 2005 respectively in order to examine temporal variations. In this study, we found that heavy metal concentrations in surface sediments sampled in the western Xiamen Bay and adjacent Maluan Bay and Yuandang Lagoon varied from 19 to 97mg kg(-1) for Cu, 45 to 60mg kg(-1) for Pb, 65 to 223mg kg(-1) for Zn, 0.11 to 1.01mg kg(-1) for Cd, 37 to 134mg kg(-1) for Cr, 25 to 65mg kg(-1) for Ni and 3.08 to 4.81% for Fe. Although all metal concentrations in sediments meets Chinese National Standard Criteria for Marine Sediment Quality, both metal enrichment factors (EF) and geoaccumulation index (I(geo)) show that Pb contamination exists in the entire study area and contamination of other metals are also present in some locations depending on the sources, of which sewage outlets and commercial ports are the main sources of contaminants to the area. This study shows that using the sediment quality standard criteria only to assess sediments cannot properly reflect sediment contamination. A multiple approaches should be applied for the sediment quality assessment.     

珠江口盆地荔湾井区珠江组深水扇沉积特征

珠江口盆地白云凹陷荔湾深水区为油气勘探有利区域,通过岩石学和古生物组合特征研究,认为该区珠江组下部属于典型的深水扇沉积,可划分为早期盆地扇和晚期斜坡扇两种类型,两类深水扇都以发育颗粒流、砂质碎屑流及低密度浊流等顺坡重力流沉积为主,同时夹有少量内波和等深流等深水牵引流改造沉积。砂质碎屑流为两类深水扇水道砂体的主要沉积类型,发育有逆-正粒序层理、平行层理和水平层理,粒序层内可见各种丰富的液化变形和生物逃逸构造,而水平层内发育有更多的生物钻孔和扰动现象。两类深水扇的沉积构造和古生物特征有明显差异,其中盆地扇水道砂岩中普遍含硅质小砾石,水道间泥岩中含有较多保存完好的抱球虫化石,斜坡扇水道砂岩以富含炭泥屑为典型特征,水道间泥岩含有更丰富的颗石藻和抱球虫化石,其中部分抱球虫和颗石具有遭受海底溶蚀作用的现象,指示斜坡扇相对盆地扇有更大的水体深度。平面上两类深水扇具有相似的重力流沉积的分带性,都具有自陆架坡折向盆地方向由颗粒流沉积逐渐向砂质碎屑流和近源高密度浊流、远源低密度浊流等单向演化的特点。