程海断裂带断层泥中石英碎砾表面SEM特征及断层活动状态的分析

根据断层泥中石英碎砾表面SEM特征的鉴定研究，可将程海断裂中、北段断层泥中石英碎砾表面SEM形貌特征分为6类，这表明该段断裂经历了长期多期次活动，强烈活动时间在中晚更新世；5件样品中均未见破裂类(Io)的石英颗粒，表明程海断裂全新世以来强烈活动的频度相对较低。石英碎砾表面机械作用特征的分类统计研究显示：程海断裂中、北段晚更新世以来，断层所经历的活动方式以粘滑活动为主。     

小秦岭金矿含金石英脉中黄铁矿晶体的表面微形貌研究

利用微分干涉显微镜、扫描电镜、透射电镜等对小秦岭金矿含金石英脉中黄铁矿晶体的表面微形貌进行了研究。黄铁矿晶体的{210}面上发育自由生长层，表明{210}面是F面，其生长机理受二维成核层生长所制约。除简单的五角十二面体外，其他形态黄铁矿晶体的{210}面上也发育有自由生长层。{210}面上的正条纹有些是由{100}面上生长层的边缘台阶在{210}面上叠堆形成，另一些正条纹则是{210}面上生长层边缘台阶堆叠的产物。透射电镜和电子衍射花样研究表明，负条纹黄铁矿晶体是由30～50nm大小的核团经自动定向附生作用形成，每个核团不是单晶体，而是由许多早先在溶液中形成的小微晶聚合而成。这些特征表明负条纹黄铁矿晶体是在溶液过饱和度极高和温度梯度小的理想环境中形成，它的形成与杂质无关。PBC理论和唐纳-哈克定律能较好地解释自然界中黄铁矿晶体{100}面上普遍发育自由生长层、而{210}面上自由生长层极为罕见的原因。除日本释迦内矿区黑矿之上的浮岩凝灰岩中产生出负条纹黄铁矿晶体外，在石英脉型金矿床中也有负条纹黄铁矿晶体产出。     

石英脉型辉钼矿矿床多建造地球化学异常特征

通过对石英脉型辉钼矿床水系沉积物和区域成矿带多建造地球化学异常特征的研究,为寻找石英脉型钼矿床提供地球化学论据。     

Weathering: Toward a Fractal Quantifying

Weathering occurs over a wide range of scales. To link features through these scales is a major challenge for interdisciplinary weathering studies. Fractal approach seems to be specially useful for this purpose. We introduce a multistep fractal weathering assessment scheme devoted to extract fractal weathering classifiers from texture analysis of the mineral's image. Our scheme enables to quantitatively estimate the global and local information about the geometry of the weathering pattern. This information is basic to develop geometrical indices of weathering, which can significantly enrich the common qualitative and semiquantitative weathering assessment schemes. To justify the fractal approach, a strong statistical self-similarity has been documented for both the weathering and fresh features of two common silica minerals: quartz and biogenic A-opal (phytolith) over four orders of length scales. The procedure is fast, drastically reduces thresholding bias, promises to be universal, it is valid for genetically different minerals and rock types, scale independent, and specially useful for monitoring the changes in the mineral's roughness during the alteration. Two of the proposed classifiers seem to be potentially useful for direct application in the field and be used by nonspecialist.     

Further examples of ventifacts and unusual patterned ground from the Falkland Islands, South Atlantic

Abstract Examples of ventifacts and forms of unusual patterned ground that differ in situation, characteristics and/or origin to types reported previously are described from the Falkland Islands, South Atlantic. The ventifacts, represented by clasts projecting from an eroding tillite shore platform, have been grooved by the passage of windblown sand. The patterned ground forms comprise stone polygons on clay loam regolith, stone polygons on peat, peat‐filled desiccation cracks on peat, and clusters of on‐edge clasts (stone packings) on a gravel beach. Aeolian transport of particles is considered responsible for the infill of the polygonal cracks. The clusters of on‐edge clasts are thought to have developed as a result of wave action, in particular backwash and/or undertow. Although these features occupy small surface areas they provide useful information about local geomorphic processes and testify to the marked diversity of such features in nature.     

Dust production and the release of iron oxides resulting from the aeolian abrasion of natural dune sands

Global dust trajectories indicate that signi?cant quantities of aeolian‐transported iron oxides originate in contemporary dryland areas. One potential source is the iron‐rich clay coatings that characterize many sand‐sized particles in desert dune?elds. This paper uses laboratory experiments to determine the rate at which these coatings can be removed from dune sands by aeolian abrasion. The coatings impart a red colour to the grains to which previous researchers have assigned variable geomorphological signi?cance. The quantities of iron removed during a 120 hour abrasion experiment are small (99 mg kg^?1) and dif?cult to detect by eye; however, high resolution spectroscopy clearly indicates that ferric oxides are released during abrasion and the re?ectance of the particles alters. One of the products of aeolian abrasion is ?ne particles (<10 µm diameter) with the potential for long distance transport. Copyright © 2004 John Wiley & Sons, Ltd.     

The role of moisture cycling in the weathering of a quartz chlorite schist in a tropical environment: findings of a laboratory simulation

Long‐term weathering of a quartz chlorite schist via wetting and drying was studied under a simulated tropical climate. Cubic rock samples (15 mm × 15 mm × 15 mm) were cut from larger rocks and subjected to time‐compressed climatic conditions simulating the tropical wet season climate at the Ranger Uranium Mine in the Northern Territory, Australia. Fragmentation, moisture content and moisture uptake rate were monitored over 5000 cycles of wetting and drying. To determine the impact of climatic variables, five climatic regimes were simulated, varying water application, temperature and drying. One of the climatic regimes reproduced observed temperature and moisture variability at the Ranger Uranium Mine, but over a compressed time scale. It is shown that wetting and drying is capable of weathering quartz chlorite schist with changes expected over a real time period of decades. While wetting and drying alone does produce changes to rock morphology, the incorporation of temperature variation further enhances weathering rates. Although little fragmentation occurred in experiments, significant changes to internal pore structure were observed, which could potentially enhance other weathering mechanisms. Moisture variability is shown to lead to higher weathering rates than are observed when samples are subjected only to leaching. Finally, experiments were conducted on two rock samples from the same source having only subtle differences in mineralogy. The samples exhibited quite different weathering rates leading to the conclusion that our knowledge of the role of rock type and composition in weathering is insufficient for the accurate determination of weathering rates. Copyright © 2005 John Wiley & Sons, Ltd.     

The initiation and development of metamorphic foliation in the Otago Schist, Part 2: evidence from quartz grain-shape data

Shape, size and orientation measurements of quartz grains sampled along two transects that cross zones of increasing metamorphic grade in the Otago Schist, New Zealand, reveal the role of quartz in the progressive development of metamorphic foliation. Sedimentary compaction and diagenesis contributed little to the formation of a shape‐preferred orientation (SPO) within the analysed samples. Metamorphic foliation was initiated at sub‐greenschist facies conditions as part of a composite S1‐bedding structure parallel to the axial planes of tight to isoclinal F1 folds. An important component of this foliation is a pronounced quartz SPO that formed dominantly by the effect of dissolution–precipitation creep on detrital grains in association with F1 strain. With increasing grade, the following trends are evident from the SPO data: (i) a progressive increase in the aspect ratio of grains in sections parallel to lineation, and the development of blade‐shaped grains; (ii) the early development of a strong shape preferred orientation so that blade lengths define the linear aspect of the foliation (lineation) and the intermediate axes of the blades define a partial girdle about the lineation; (iii) a slight thinning and reduction in volume of grains in the one transect; and (iv) an actual increase in thickness and volume in the survivor grains of the second transect. The highest‐grade samples, within the chlorite zone of the greenschist facies, record segregation into quartz‐ and mica‐rich layers. This segregation resulted largely from F2 crenulation and marks a key change in the distribution, deformation and SPO of the quartz grains. The contribution of quartz SPO to defining the foliation lessens as the previously discrete and aligned detrital quartz grains are replaced by aggregates and layers of dynamically recrystallized quartz grains of reduced aspect ratio and reduced alignment. Pressure solution now affects the margins of quartz‐rich layers rather than individual grains. In higher‐grade samples, therefore, the rock structure is characterized increasingly by segregation layering parallel to a foliation defined predominantly by mica SPO.     

Hydrothermal Quartz Vein Formation, Revealed by Coupled SEM-CL Imaging and Fluid Inclusion Microthermometry: Shuteen Complex, South Gobi, Mongolia

Abstract. Scanning electron microscopy-cathodoluminescence (SEM-CL) imaging of vein quartz in the Cu-mineralised, Shuteen Complex (South Gobi, Mongolia) has revealed a complex history of crystal growth, dissolution and microfracture healing, associated with several hydrothermal events that could not be detected using other observational techniques (e.g. transmitted/reflected light microscopy, back-scattered electron imaging, or secondary electron imaging).
The quartz initially grew as CL-bright/grey crystals in a 345±30C liquid reservoir, as inferred by the analysis of primary liquid fluid inclusions (average Th of 343C; 6.6∼7.7 wt% NaCl_eq). Quartz precipitation occurred at the edge of the crystals as reservoir fluids cooled to 260±25C, as indicated by micron-scale CL-dark/CL-bright quartz growth bands containing abundant fluid inclusions (with an average T_h values of 261C). Pressure fluctuations were the likely cause of dissolution, as SEM-CL imaging reveals the quartz have corroded or rounded crystal edges, and precipitation of later quartz into open space. SEM-CL imaging shows the quartz contains healed microfractures that trapped low salinity fluids (3.9 wt% NaC1_eq) with Th values of 173±15C.
SEM-CL imaging provides a means of deciphering the thermal and chemical evolution of the fossil Shuteen hydrothermal system, and the nature of hydrothermal quartz vein-forming processes, by facilitating the correlation of distinct fluid inclusion populations and their relative chronology, with specific hydrothermal events.