Comparative response analysis of conventional and innovative seismic protection strategies

The paper presents a numerical investigation aimed at evaluating the improvements achievable through devices for passive seismic protection of buildings based on the use of shape memory alloys (SMA) in place of conventional steel or rubber devices. To get some generality in the results, different resisting reinforced concrete plane frames were analysed, either protected or not. ‘New’ and ‘existing’ buildings were considered depending on whether seismic provisions are adopted in the building design or not. Base isolation and energy dissipation were equally addressed for both conventional and innovative SMA‐based devices. Fragility analyses were performed using specific damage measures to account for comparisons among different damage types; the results were then used to estimate quantitatively the effectiveness of the various protection systems. More specifically, the assessment involved a direct comparison of the damage reduction provided by each protection system with respect to the severe degradation experienced by the corresponding non‐protected frame. Structural damage, non‐structural damage and damage to contents were used on purpose and included in a subsequent phase of cost analysis to evaluate the expected gains also in terms of economic benefits and life loss prevention. The results indicate that base isolation, when applicable, provides higher degrees of safety than energy dissipation does; moreover, the use of SMA‐based devices generally brings about better performances, also in consideration of the reduced functional and maintenance requirements. Copyright © 2002 John Wiley & Sons, Ltd.     

Multi‐objective optimal design of FLC driven hybrid mass damper for seismically excited structures

Structural vibration control using active or passive control strategy is a viable technology for enhancing structural functionality and safety against natural hazards such as strong earthquakes and high wind gusts. Both the active and passive control systems have their limitations. The passive control system has limited capability to control the structural response whereas the active control system depends on external power. The power requirement for active control of civil engineering structures is usually quite high. Thus, a hybrid control system is a viable solution to alleviate some of the limitations. In this paper a multi‐objective optimal design of a hybrid control system for seismically excited building structures has been proposed. A tuned mass damper (TMD) and an active mass driver (AMD) have been used as the passive and active control components of the hybrid control system, respectively. A fuzzy logic controller (FLC) has been used to drive the AMD as the FLC has inherent robustness and ability to handle the non‐linearities and uncertainties. The genetic algorithm has been used for the optimization of the control system. Peak acceleration and displacement responses non‐dimensionalized with respect to the uncontrolled peak acceleration and displacement responses, respectively, have been used as the two objectives of the multi‐objective optimization problem. The proposed design approach for an optimum hybrid mass damper (HMD) system, driven by FLC has been demonstrated with the help of a numerical example. It is shown that the optimum values of the design parameters of the hybrid control system can be determined without specifying the modes to be controlled. The proposed FLC driven HMD has been found to be very effective for vibration control of seismically excited buildings in comparison with the available results for the same example structure but with a different optimal absorber. Copyright © 2002 John Wiley & Sons, Ltd.     

全谱直读等离子发射光谱法直接测定天然矿泉水中的SO2-4

采用全谱直读等离子发射光谱(ICP-AES)直接测定天然矿泉水中SO2-4的方法在优化工作条件下SO42-的测定下限为0.09mgL-1,方法简便,快速,适用于批量生产.     

公路边坡工程监测技术评价与分析

结合公路工程、建筑工程等土木工程建设中经常涉及到的边坡工程,评价与分析边坡工程监测的作用、内容和方法,提出了边坡工程应该在工程项目开展的开始阶段就应进行和边坡工程监测的项目,选择原则,测点布置原则、监测周期等,对边坡工程建设具有重要的意义.     

国际冰芯与气候环境研究新进展--关于国际"冰芯与气候"会议

2001年8月19～23日, 在格陵兰举行了规模空前的"冰芯与气候"国际盛会, 会议展示了冰芯与气候环境研究的最新进展. 文中介绍这次会议并概括了近年来的主要研究进展. 与南北极地区的冰芯研究相比, 中低纬度地区冰芯研究是近年来国际冰芯研究中发展最快的. 在这一研究中, 中国科学家做出了重要贡献并得到了国际同行的高度评价.     

初论古文化类型演替与传承模式的区域分异——以西拉沐沦河流域和汶泗流域为例

西拉沐沦河流域地处中国地貌大势三大台阶之中台阶与低台阶的过渡区。该区的中度抬升和下切,造成了西拉沐沦河流域考古文化遗址在空间上的垂向迁移;频繁的迁移也导致了考古遗址在堆积形态上主要表现为单一型,体现了不同考古文化之间“间断”的,不稳定的传承方式。位于中国地貌大势之低台阶上的汶泗流域,属自下古生代以来就十分稳定的剥蚀区,这些自然条件造成了汶泗流域遗址在堆积形态上主要表现为叠置型,考古文化在时空上,很少随着时间做空间上的改变,基本上在同一水平空间稳定不动,体现了不同考古文化之间“连续”、稳定的传承方式。两个流域的对比研究说明,不同地域、不同的自然条件,可以造成考古文化演替与传承模式的区域分异     

华北古大陆与哥伦比亚超大陆

由Rogers和Santosh等 (2 0 0 2 )提出的哥伦比亚超大陆 ,是约从 1.9～ 1.5Ga由Nena ,Ur和Atlantic等 3个大陆块体群 ,通过逐步汇聚而形成的一个超级大陆。它是前罗迪尼亚古 -中元古时期的超大陆。从 1.5Ga开始的裂解作用使哥伦比亚超大陆逐步破裂 ,并在 1.0Ga左右这些破裂的大陆块体又重新汇聚形成罗迪尼亚超大陆。文中除介绍Rogers等提出的哥伦比亚超大陆的概念、组成和古大陆重建图外 ,重点阐述了中国华北古大陆 2 .0～ 1.8Ga期间吕梁—中条造山运动和 1.8～1.6Ga时期大规模裂解事件群的性质、特点和同位素年龄数据。文中提出哥伦比亚超大陆汇聚主要峰期与吕梁—中条造山运动的时限相一致 ,华北古大陆属于哥伦比亚超大陆的组成部分 ,并可能为Nena大陆块体群的一员 ,在造山及裂解事件群的性质、特点和时代等特征上 ,华北与北美、西伯利亚和西北欧有更大的相似性。     

论三维等时线叠加反偏移中的有关问题

利用几何射线理论和一种考虑了积分域边缘贡献的二维稳想法，研究了三维等时线叠加反偏移中的反偏移场，反偏移加权函及反偏移孔径。结果证明，在有限孔径条件下，反偏移场的结构比已发表的结果要复杂和多。即使在最简单的条件下，反偏移场也是由反偏移信号的反偏移噪声（孔径效应）叠加而成的。而且，反偏移场的结构强烈地依赖于反偏移孔径边缘的位置。为了消除孔径效应，应采用最佳反偏移孔径和针对有限孔径的加权函数。根据定义，最佳反偏移孔径为稳相点的第一和第二Fresnel区之和。在第一Fresnel区内，有限孔径和加权函数与文献中所给出的加权函数完全一致。而在第二Fresnel区内，有限孔径加权函数为常规的加权函数与一窗函数的乘积。在反偏移孔径的边缘上，有限孔径加权函恒取零值。     

非常规综合物化探油气预测研究

非常规综合物化探方法油气预测研究中存在的主要问题为：缺乏系统与综合的基础性理论研究，异常形成的机理还不十分清楚，在参数的优化组合及异常的求取上尚有诸多不足。针对后一种情况，选择松辽盆地东岭构造作为实验区进行了有益的探索。选取低能吸附烃、放射性测氡及土壤热释光三类参数进行了优化组合，分别计算了综合指标MAE与MAC及组合熵，然后对各值采用泛克里格法求取异常，取得了良好的效果。下一步研究应从异常形成的机理入手，建立三维非常规综合物化探油气预测模式，以提高油气预测成功率。     

固溶体矿物的性质对计算河南西峡红柱石矿形成条件的影响

自然界的大多数造岩矿的是由两种或多种组分混合而成的固溶体。因此，在矿物，岩石和矿床等地质体的平衡热力学研究中不可避免地要涉及固溶体矿物热力学地为的问题。河南省西峡县杨乃沟红柱石矿泥质片岩中仅出现红柱石而没有蓝晶石和夕线石，红柱石矿物包裹体测温结果为420－600℃。通过矿物共生平衡p-t曲线所计算出的片岩形成温度和压力条件也应位于上述岩石学和岩相学等特征所限定的范围内。以此为基础，通过构筑矿物共生p-t平衡曲线的方法，对片岩中若干固溶体矿物理想性／非理想性问题进行了研究。其中斜长石必须以非理想固溶体处理，而石榴子石，黑云母和白云母视作理想固溶体的计算结果同片岩的岩石学和岩相学等特征相一致。