Isograds and P–T evolution in the eastern Lepontine Alps (Graubünden, Switzerland)

Reactions producing Al‐rich index minerals in the south‐eastern part of the Lepontine Dome (Central Alps, Switzerland) are investigated using mineral distribution maps, microstructural observations and equilibrium phase diagrams. The apparent staurolite mineral zone boundary corresponds to the paragonite breakdown reaction Pg + Grt + Qtz = Pl + Al₂O₃ + W. Equilibrium phase diagrams show that most natural metapelites do not contain staurolite or alumosilicates as long as univalent cations are predominantly accommodated in white mica. For a wide range of metapelitic compositions the paragonite breakdown releases sufficient Al for the formation of these minerals. Rare occurrences of staurolite and kyanite, north of the formerly mapped mineral zone boundaries, coexist with paragonite and are restricted to extremely Al‐rich bulk compositions. The stable branch of the kyanite‐forming paragonite breakdown reaction above 660 °C yields an additional mapable isograd. The second set of Al‐releasing reactions is biotite‐producing phengite breakdown. However, these reactions are less suitable to produce well defined reaction isograds in the field as they are more continuous and their progress is strongly dependent on bulk composition. Well developed fibrolite in metapelites does not appear until staurolite starts to breakdown. We conclude that amphibolite facies conditions in the study area were attained by decompression, without substantial heating at low pressures.     

Petrological constraints on the formation conditions and retrograde P–T path of the Kotsu eclogite unit, central Shikoku

A largely undocumented region of eclogite associated with a thick blueschist unit occurs in the Kotsu area of the Sanbagawa belt. The composition of coexisting garnet and omphacite suggests that the Kotsu eclogite formed at peak temperatures of around 600 °C synchronous with a penetrative deformation (D1). There are local significant differences in oxygen fugacity of the eclogite reflected in mineral chemistries. The peak pressure is constrained to lie between 14 and 25 kbar by microstructural evidence for the stability of paragonite throughout the history recorded by the eclogite, and the composition of omphacite in associated eclogite facies pelitic schist. Application of garnet‐phengite‐omphacite geobarometry gives metamorphic pressures around 20 kbar. Retrograde metamorphism associated with penetrative deformation (D2) is in the greenschist facies. The composition of syn‐D2 amphibole in hematite‐bearing basic schist and the nature of the calcium carbonate phase suggest that the retrograde P–T path was not associated with a significant increase or decrease in the ratio of P–T conditions following the peak of metamorphism. This P–T path contrasts with the open clockwise path derived from eclogite of the Besshi area. The development of distinct P–T paths in different parts of the Sanbagawa belt shows the shape of the P–T path is not primarily controlled by tectonic setting, but by internal factors such as geometry of metamorphic units and exhumation rates.     

Phase Equilibria Constraints on the Chemical and Physical Evolution of the Campanian Ignimbrite

The Campanian Ignimbrite is a > 200 km³ trachyte–phonolitepyroclastic deposit that erupted at 39·3 ± 0·1ka within the Campi Flegrei west of Naples, Italy. Here we testthe hypothesis that Campanian Ignimbrite magma was derived byisobaric crystal fractionation of a parental basaltic trachyandesiticmelt that reacted and came into local equilibrium with smallamounts (5–10 wt%) of crustal rock (skarns and foid-syenites)during crystallization. Comparison of observed crystal and magmacompositions with results of phase equilibria assimilation–fractionationsimulations (MELTS) is generally very good. Oxygen fugacitywas approximately buffered along QFM + 1 (where QFM is the quartz–fayalite–magnetitebuffer) during isobaric fractionation at 0·15 GPa ( 6km depth). The parental melt, reconstructed from melt inclusionand host clinopyroxene compositions, is found to be basaltictrachyandesite liquid (51·1 wt% SiO₂, 9·3 wt%MgO, 3 wt% H₂O). A significant feature of phase equilibria simulationsis the existence of a pseudo-invariant temperature, 883 °C,at which the fraction of melt remaining in the system decreasesabruptly from 0·5 to < 0·1. Crystallizationat the pseudo-invariant point leads to abrupt changes in thecomposition, properties (density, dissolved water content),and physical state (viscosity, volume fraction fluid) of meltand magma. A dramatic decrease in melt viscosity (from 1700Pa s to 200 Pa s), coupled with a change in the volume fractionof water in magma (from 0·1 to 0·8) and a dramaticdecrease in melt and magma density acted as a destabilizingeruption trigger. Thermal models suggest a timescale of 200kyr from the beginning of fractionation until eruption, leadingto an apparent rate of evolved magma generation of about 10^–3km³/year. In situ crystallization and crystal settling in density-stratifiedregions, as well as in convectively mixed, less evolved subjacentmagma, operate rapidly enough to match this apparent volumetricrate of evolved magma production. KEY WORDS: assimilation; Campanian Ignimbrite; fractional crystallization; magma dynamics; phase equilibria     

导航卫星天线相位中心误差标定方法研究现状及发展趋势

卫星天线相位中心误差是影响GNSS高精度定位定轨的重要误差源,实用中需要对其精确标定。随着北斗卫星导航系统的建设发展,如何对卫星天线相位中心误差进行更为精确的标定应引起人们的重视。为此,本文首先简要介绍了各卫星导航系统的卫星天线情况,而后系统总结了导航卫星天线相位中心误差标定方法的发展历程和研究现状,指出了未来卫星天线相位中心误差标定方法的发展趋势,相关研究成果对我国北斗卫星天线相位中心误差的标定方法研究具有参考意义。     

An Evaluation of Phase Behaviors of the Oil-Gas-Water System in the Displacement of Crude Oil with CO2

CO₂ dissolution into an aqueous phase and water evaporation into a gaseous phase takes place during CO₂ injection into an oil reservoir. This study aims to evaluate the phase behaviors of the oil-gas-water system in the displacement of crude oil by CO₂. The composition of the JL oilfield in the northeast of China is taken as an example. The flash calculation of the oil-gas-water system was performed, based on the method presented by Li and Nghiem. The research re...     

建场测深法在新疆布尔津盆地油铀勘探中的应用

为明确位于新疆北部的布尔津盆地的资源状况,以实际采集数据为基础,采用建场测深法成果剖面研究了该盆地的地层地质结构,并对深层油气及浅部砂岩型铀矿进行评价。通过利用已知测井电阻率曲线模拟计算不同深度的电磁信号频率响应,论证了该方法探测从浅层第三系到深部石炭系的采集参数和工作方案;在数据处理成果的基础上,结合研究区已知地层物性特征,推断沿线的地质结构,揭示了布尔津凹陷的结构及下二叠统卡拉岗组、上石炭统哈尔加乌组、上石炭统恰其海组地层的分布,认为哈尔加乌组是本区有潜力的烃源岩。同时利用电阻率及双频相位属性对研究区浅部第三系砂岩型铀成矿条件进行分析,其结果与附近已知矿点情况吻合。本文提出的方法可为类似地区进行多种矿产资源勘探提供技术参考。     

2021年圣克鲁斯群岛MS 6.0地震PKPPKP震相识别

采用云南省地震局3个有人值守国家测震台和5个无人值守国家测震台记录到的2021年11月25日圣克鲁斯群岛M_S 6.0地震波形,运用测震学分析方法,对此次地震进行分析,提出其常见震相的一般性特征,并且重点总结了PKPPKP震相的特征,以免误将该震相分析为1个新地震的P波,分析结果表明PKPPKP震相在震中距约为70°时明显。     

含气软黏土的不排水抗剪强度计算模型

含气软黏土广泛分布在世界五大洲,大量离散气泡的存在对软黏土的不排水抗剪强度具有强化或损伤作用,然而目前仍缺乏能综合考虑气相强化与气相损伤竞争机制的含气土不排水剪切强度解析表达式。结合临界状态土力学理论,基于笔者提出的含气土屈服函数,建立了v-lnp¢ 空间下临界状态线截距与土体含气特性(u_{w 0},y₀)的数学关系,进而推导了含气软黏土在三轴应力状态下不排水抗剪强度s_u的理论显式表达式。同时,采用所提出的含气软黏土不排水抗剪强度理论计算公式,分别对比了3种典型的含气软黏土在不同含气特性下的不排水抗剪强度理论预测与试验结果,包括马来西亚高岭土、Combwich 黏土和高岭黏土。另外,对比分析了4种不同的含气软黏土不排水抗剪强度理论计算模型的预测误差百分比,证明了提出的基于改进的含气软黏土本构模型的不排水抗剪强度理论计算式的合理性,能够更加准确地同时考虑含气软黏土的气相强化与气相损伤双重效应。     

Grampian migmatites in the Buchan Block,NE Scotland

Rocks exposed along the Scottish coast between Fraserburgh and Inzie Head contain information critical to understanding the evolution of the Buchan Block, the type locality for low‐P, high‐T regional metamorphism, and its relationship with the rest of the Grampian terrane, one of the major tectonostratigraphic components of the Scottish Caledonides. The ~8 km long section traverses a regional network of shear zones and, at the highest grades around Inzie Head, passes into the core of the Buchan Anticline, a large‐scale open fold that is commonly regarded as a late structure, post‐dating metamorphism. The metasedimentary rocks increase in grade from upper amphibolite to granulite facies and preserve unequivocal evidence for partial melting. The diatexite migmatites around Inzie Head, along with other gneissose units within the Buchan Block, have been regarded as allochthonous Precambrian basement rocks that were thrust into their current position during the Grampian orogenesis. However, field observations show that the onset of in situ partial melting in metapelitic rocks, which was associated with the formation of garnet‐bearing aplites and associated pegmatites, occurred around Fraserburgh, where shear fabrics are absent. Thus, the rocks preserve a continuous metamorphic field gradient that straddles the shear zone network. This observation supports an alternative interpretation that anatexis was the result of mid‐Ordovician (Grampian) metamorphism, rather than an older tectonothermal event, and that the Inzie Head gneisses are autochthonous. Using an average mid‐Dalradian pelite as a plausible representative protolith, phase equilibria modelling satisfactorily reproduces the observed appearance and disappearance of key minerals providing that peritectic garnet produced with the first formed melts (represented by the garnet‐bearing aplites) depleted the source rocks in Mn. The modelled metamorphic field gradient records a temperature increase of at least 150 °C (from ~650 °C near Fraserburgh to in excess of 800 °C at Inzie Head) but is isobaric at pressures of 2.7–2.8 kbar, suggesting the Buchan Anticline developed synchronous with partial melting. The Buchan Anticline is likely an expression of crustal thinning and asthenospheric upwelling, which produced voluminous gabbroic intrusions that supplied the heat for Buchan metamorphism.