新疆准噶尔地区富硫型与贫硫型浅成低温热液金矿床成矿流体与碳、硫、铅同位素

对新疆准噶尔地区浅成低温热液型金矿床中富硫型的阔尔真阔腊金矿、贫硫型的石英滩金矿进行了流依包裹体的均一温度、爆裂温度、包裹体气液相成分、H、O 同位素、矿体围岩及脉石英包裹体 C 同位素、矿体中黄铁矿等 S、Ph 同位素等系统地进行了研究,综合研究表明,本区该类型金矿成矿流体一般温度低、盐度低,来源主要为循环的大气水、矿石中黄铁矿的 S、Pb 同位素均为深源,暗示金的深部来源:矿体石英包裹体中 CO_2的δ~(13)C 为低于-10‰的有机碳,反映了本区年轻的富含有机质的沉积地层参与了金的成矿。此外,本文首次提出了富硫型阔尔真阔腊金矿床成矿流体中有侵入岩浆热液参与,深部有多金属成矿远景;贫硫型石英滩金矿没有侵入岩浆热液的参与,成矿仅与火山古热液活动有关,其成矿较单一。此外,阔尔真阔腊金矿中低温流体活动较强,金矿化也较强:石英滩金矿低温流体活动相对较弱,金矿化也较弱,也体现了该类型金矿床低温流体活动的越强烈,金矿化越强的规律。     

湖北省红石地区叶家小湾金矿基本特征及找矿模型

红石地区叶家小湾金矿形成于燕山晚期，成矿流体主要来自岩浆期后热液。断裂和岩浆岩是两大重要的成矿地质条件。控矿构造为北东向断裂，花岗岩是金矿的有利赋矿围岩。成矿物质来自深部，与燕山晚期 浆活动密切相关，叶家小湾金矿综合找矿模型的建立，对于在红石地区开展找金（银）工作具有重要指导作用。     

胶莱盆地含金建造地球化学特征

胶莱盆地蓬家夼金矿床及宋家沟金矿床均赋存于下白垩统莱阳群一段含金建造中,该含金建造由砾岩、含砾砂岩、碳质泥岩及碳酸盐岩等组成,Au100.2～241.0ng/g,Ag1.50～3.73μg/g,Zn560～1021μg/g,Pb356～364μg/g,Cu60～394μg/g,As11.0～25.4μg/g,同时富硫及有机碳。含金建造K-Rb、K-Ba呈正相关,K-Sr、K-Ca不相关,Sr/Ba<1,B、V关系均显示了陆相淡水沉积特征。La/Y-REE组成显示了沉积特征。围岩、矿石及矿石中黄铁矿及磁铁矿的稀土元素分布模式相似,该含金建造是矿源层也是容矿层,是区内重要的成矿地质条件及找矿标志。     

安徽凤阳和张八岭地区含金石英脉的40Ar/39Ar年龄及其地质意义

用快中子活化法测定了安徽凤阳和张八岭地区朱顶、毛山和上成3个金矿床第一阶段晚期和第二阶段的含金石英脉,石英的阶段加热40Ar/39Ar坪年龄值域为(116.1±0.6～118.3±0.5)Ma,分别与其最小视年龄和等时线年龄接近.坪年龄、最小视年龄和等时线年龄3种年龄值域为(113.4±0.4～118.3±0.5)Ma,可以作为石英的形成年龄域. 根据含金石英脉和围岩的空间关系,该年龄值域作为石英脉金矿的形成年龄是合理可靠的.金矿床形成于早白垩世阿普特期,与此时郯庐断裂带略带右行走滑正断层活动一致.     

老柞山金矿田鸡爪沟金矿床地质特征及成因探讨

分析了鸡爪沟金矿床地质特征和成因 ,并对形成过程进行理论推导 ,认为该矿床为与火山作用有关的中温岩浆热液充填型矿床。     

山东省胶莱盆地东北缘宋家沟金矿地质特征及其成因初探

山东省宋家沟金矿位于胶莱盆地东北缘 ,产于莱阳群林寺山组断裂破碎带中。牟—即断裂带为切割莱阳群的断裂 ,对金矿起控制作用。早白垩纪晚期的火山—岩浆活动为深部含金热液的运移提供了通道 ,并在其有利的构造部位沉淀成矿。稀土元素特征和氧、硫同位素特征亦说明宋家沟金矿的物质来源以深源为主 (幔源及下地壳中的金 ) ,是早白垩世晚期的火山—岩浆活动作用的结果。     

Gold Mineralization and Occurrence of Sinter in the Hoshino Area, Fukuoka Prefecture, Japan

Abstract. Several epithermal gold deposits occur in the Hoshino area, which is located in the western end of the late Cenozoic Hohi volcanic zone, north‐central Kyushu, Japan. The area is characterized by intermediate to felsic extrusive rocks of Pliocene age. In the Hoshino area, the shallow manifestation of the hydrothermal activity is exposed on the surface. Several outcrops of sinter are still preserved on the top of hydro thermally altered volcanic rocks, and high‐grade gold‐bearing quartz veins occur on the surface at lower levels. The hydrothermal alteration resulted into well‐developed alteration zones. The zonal alteration pattern, primarily of near‐neutral pH type, is characterized by the outer smectite zone of a lower temperature, and the inner mixed layer minerals zone of a higher temperature. Quartz vein‐related or fracture‐controlled alteration, is represented by the occurrence of interstratified illite/smectite and K‐feldspar, suggesting a potassium‐enriched alteration. The mineralization in the Hoshino area is recognized on the surface by the occurrence of gold‐bearing quartz veins distributed mainly in the mixed layer minerals zone. The fracture system related to the gold mineralization is mainly characterized by NW‐SE trend. The alteration pattern and the mineralogical composition of the veins suggest that the mineralizing fluids had near‐neutral pH and the mineralization is of low‐sulfidation‐type. Fluid inclusion data and textures observed in quartz veins indicate that gold precipitated during boiling. The chemical composition of quartz veins shows that high‐grade gold‐bearing quartz veins are characterized by higher content of Al₂O₃, K₂O and Rb. Several outcrops of silica‐sinters are distributed on the top of the mixed layer minerals zone. Although their structures are not very well preserved, because of later silicification, the Hoshino sinters still show characteristic textures identical to those observed in modern sinters, such as the presence of plant fossil incorporated into the sinters, the strongly developed depositional laminations and the columnar structures perpendicular to the depositional surfaces. Quartz is the only silica mineral constituting the Hoshino sinters presently. The conversion of amorphous silica into quartz was probably governed by higher temperatures resulting from later hydrothermal activity. This later hydrothermal activity is reflected by the intense silicification affecting mainly the lower parts of the sinters and also by the presence of quartz veins cutting the sinters. The distribution of sinters in the Hoshino area is very significant. The presence beneath the sinters of concealed high‐grade gold‐bearing quartz veins should be highly considered and exploration work is strongly suggested.     

Geochronology of Gold Deposits and Its Implication for Metallogenesis in the Fengxian-Lixian Area, Qinling Orogenic Belt, China

Abstract: A series of super large‐scale and large‐scale Pb and Zn, and Au deposits are distributed in the Qinling orogenic belt, China. Gold deposits were generally ascribed to Carlin‐type originated from circular meteoric water. Visible and coarse‐grained gold (up to over 3mm in grain size) was recently identified in some gold deposits in the Fengxian‐Lixian area, Qinling. Au‐bearing quartz lodes related to magmatism were discovered in the Xiaogouli gold deposit. Two types of Au‐bearing quartz veins, i.e., NW‐trending quartz veins and NE‐trending quartz veins cutting strata are widely present in the Baguamiao gold deposit. Both are spatially associated with each other. The former is generally snake–like, S‐shape or zigzag, which was resulted from plastic deformation by ductile shearing, being generally cut by the latter. The latter is generally linear with widely developed bleaching alteration zones in its adjacent wall rocks, which symbolizes the superimposition of brittle deformation and filling and metasomatism of magmatic hydrothermal solution in ductile shear zones after uplifting of the shear zones near the surface. The NW‐trending quartz veins contain Au of lower than 3ppm. The NE‐trending quartz veins contain Au of more than 3 ppm, so that NE‐trending quartz veins and the adjoining altered rocks are important ores. The NW‐trending Au–bearing quartz vein was dated as 210.61.26 to 232.581.59 Ma by ⁴⁰Ar–³⁹Ar method, i.e., late Indosinian epoch (Triassic). The NE‐trending Au–bearing quartz vein was dated as 131.910.89 to 197.451.13 Ma by ⁴⁰Ar–³⁹Ar method, i.e., Yanshanian epoch (Jurassic). The ⁴⁰Ar–³⁹Ar age of the NW‐trending Au–bearing quartz veins represents the age of the ductile shear formation. The isotope data of the NE‐trending quartz veins indicate that gold mineralization was closely related to Indosinian and Yanshanian granite intrusives not only in time and space, but also in origin.     

Caractérisation des paragenèses et des paléocirculations fluides dans l'indice d'or de Bleı̈da (Anti-Atlas,Maroc)Characterization of the paragenesis and the fluid palaeo-circulations in the gold showings of Bleida (Anti-Atlas,Morocco)

The gold showings at Bleida are hosted in Late Pan-African N50–80 °E quartz–hematite–chlorite 1 tension lenses that are related to the activity of major sinistral sub-east–west thrusts. Ores result from three superimposed stages of fluid migration. Gold occurs in microcracks offsetting the earlier minerals. Fluids evolved from COHN compositions with a saline component to boiling aqueous fluids. Pressure and temperature decreased from 50 MPa and 300 °C to less than 4 MPa and 150 °C. Thus, the gold showings at Bleida were formed in a typical geothermal (epithermal) setting, likely controlled by the Late Pan-African magmatism. To cite this article: A. Barakat et al., C. R. Geoscience 334 (2002) 35–41     

Use of Noise to Augment Training Data: A Neural Network Method of Mineral–Potential Mapping in Regions of Limited Known Deposit Examples

One of the main factors that affects the performance of MLP neural networks trained using the backpropagation algorithm in mineral-potential mapping isthe paucity of deposit relative to barren training patterns. To overcome this problem, random noise is added to the original training patterns in order to create additional synthetic deposit training data. Experiments on the effect of the number of deposits available for training in the Kalgoorlie Terrane orogenic gold province show that both the classification performance of a trained network and the quality of the resultant prospectivity map increasesignificantly with increased numbers of deposit patterns. Experiments are conducted to determine the optimum amount of noise using both uniform and normally distributed random noise. Through the addition of noise to the original deposit training data, the number of deposit training patterns is increased from approximately 50 to 1000. The percentage of correct classifications significantly improves for the independent test set as well as for deposit patterns in the test set. For example, using ±40% uniform random noise, the test-set classification performance increases from 67.9% and 68.0% to 72.8% and 77.1% (for test-set overall and test-set deposit patterns, respectively). Indices for the quality of the resultant prospectivity map, (i.e. D/A, D × (D/A), where D is the percentage of deposits and A is the percentage of the total area for the highest prospectivity map-class, and area under an ROC curve) also increase from 8.2, 105, 0.79 to 17.9, 226, 0.87, respectively. Increasing the size of the training-stop data set results in a further increase in classification performance to 73.5%, 77.4%, 14.7, 296, 0.87 for test-set overall and test-set deposit patterns, D/A, D × (D/A), and area under the ROC curve, respectively.