基于车桥耦合振动的常用简支空心板梁桥冲击系数分析

通过Universal Mechanism和ANSYS软件相结合建立了车桥耦合振动模型,考虑车型、行车速度、车重和桥梁频率等因素,对工程常用的4种标准跨径装配式混凝土空心板梁桥进行了车桥耦合振动模拟。研究表明:冲击系数随车速增加而上升;随车重增加而增大;随桥梁频率的增加而降低。在多种因素中,车速对冲击系数影响最为明显。     

高墩大跨度刚构桥抗震加固有限元分析

大跨刚构桥结构桥跨较长和受力复杂。为提高抗震性能,需要对加固前后的桥梁进行抗震性能研究。以某双肢薄壁型高墩大跨度刚构桥为背景,采用ANSYS程序APDL语言,对结构进行合理的参数选取、网格划分和边界约束,结合抗震等级和桥梁规范等有关规定,研究整体结构在地震作用下的变化规律。通过沿墩高方向获取节点的方法,确定在地震作用下,各节点的最大位移从下到上逐渐增大。选取桥墩双肢相同部位各节点进行横向比较,总结得出双肢薄壁桥墩具有平分荷载和延长寿命的特点。为提高桥梁整体抗震性能,采取联结桥墩增大截面的方式进行加固,对比加固前后两模型在同一地震作用下的结构响应,得出该方法在提高结构整体刚度方面,效果显著。     

海底地震动作用下近海桥梁地震响应研究

以某近海大桥引桥段连续梁桥为工程背景,建立考虑海底地震动特性和腐蚀效应的近海桥梁地震反应分析模型。采用增量动力分析方法分析腐蚀效应以及海底地震动作用对近海桥梁地震响应的影响。研究结果表明:腐蚀效应与海底地震动作用都会不同程度影响近海桥梁结构的抗震性能。其中:腐蚀效应会增大近海桥梁的破坏指标,降低最大墩底剪力和弯矩值,从而降低桥梁的抗震性能;海底地震动作用会增大近海桥梁的破坏指标及最大墩底剪力、弯矩值;在2种因素耦合作用下,桥梁的抗震性能将会进一步降低。     

移动荷载对桥梁动力响应的影响研究——以开裂预应力混凝土简支梁为例

混凝土桥梁在工作过程中会产生裂缝,为分析移动荷载对开裂混凝土桥梁结构刚度的影响,对开裂梁动力响应进行分析。建立简支T梁桥有限元模型,并将移动荷载施加至有限元模型中。根据简支T梁桥破坏横向分布位置和强度的不同,研究不同工况下各梁荷载横向分布及不同移动速度对裂缝扩展宽度的影响。结果表明,数值模拟结果能较好地验证计算模型的准确性;在较大的移动荷载作用下,混凝土开裂,导致结构刚度减小、位移增大;随着移动荷载和速度的增加,开裂时间增加,结构刚度降低,持续时间增加,位移增大,使结构响应呈现明显非线性。     

新疆及周缘构造破裂特征及地震序列类型

横亘新疆境内的天山及其周边的西昆仑、阿尔金和阿尔泰是中国大陆著名的强构造运动区和地震活动带。在对新疆构造区应力环境、动力过程、断层运动变形特征和地震序列分析讨论的基础上,对新疆及其周缘主要构造区地震破裂方式和序列类型进行研究,得出如下结论:(1)西昆仑构造区受来自青藏块体和塔里木块体NS和NW向水平压应力和垂向力的作用,构造运动呈现出走滑与逆冲特征,震源破裂以走滑型为主,数量较少的逆断型地震主要分布在西昆仑帕米尔一侧的深震挤压区,正断型地震主要出现在西昆仑与阿尔金交汇的拉张盆地及附近。该区主余型地震占63%,6级以上地震序列也存在多震类型。(2)阿尔金断裂带位于西昆仑北缘断裂和北祁连断裂过渡带,受青藏块体向北和向西的推挤,断裂本身的左旋位移量通过两端逆冲挤压而转化,使得青藏高原北边界不断向外扩展。在此力源下,阿尔金断裂带震源破裂以走滑为主,也有少量的逆冲型地震。地震序列中主余型和孤立型地震占比相同(占44%)。(3)在印度板块和亚欧大陆碰撞效应影响下,天山地区产生近NNE向水平压应力,构造运动显现出带旋性特征的逆冲和走滑,震源破裂方式与之相吻合。而天山构造大跨度的空间展布、扩展形式的多样性和地震破裂的两重性,又影响到地震序列类型的多样性,使得主余型、孤立型和多震型地震在不同构造部位呈现优势分布。(4)阿尔泰的构造运动可能受到了来自印度板块与亚欧板块碰撞的远程效应和西伯利亚块体南向运动的双向影响,形成NNE和SW向水平挤压力,主要大型发震断裂做右旋剪扭错动,而一些深断裂则以逆冲运动为主。震源破裂呈现出走滑(占64%)和部分的逆冲(占27%),6级以上地震序列主要为主余型,5级左右地震则多为孤立型。     

Dynamic testing and system identification of a multi-span highway bridge

A simple and effective procedure for conducting the free vibration test on highway bridges is presented. The impulsive force in each direction is generated by a loaded truck that either stops suddenly or falls down from a rigid block. The feasibility of the procedure is demonstrated in identification of the dynamic properties, i.e. the vibration frequencies, mode shapes, and damping ratios, of a three-span box-girder concrete bridge using the Ibrahim Time-Domain (ITD) technique. Up to 14 modes have been identified for the present case. For the purpose of verification, ambient vibration tests were also carried out, with the data processed by the random decrement (Randomdec) technique to yield the free vibration response, followed by the ITD technique. The dynamic properties identified from the two types of test correlate very well with each other, indicating the validity of each procedure described herein. Although many more modes can be identified from the free vibration test because of the higher quality of data produced, the easiness and general applicability of the ambient vibration test can still be appreciated. A comparison of the experimental results with those by the finite element method indicated a lesser degree of correlation, implying that the finite element model adopted in design requires further refinement, say, through a more realistic evaluation of the boundary conditions, geometric and material properties of the bridge. Copyright © 1999 John Wiley & Sons Ltd.     

黄河小浪底傍河地下水源地资源评价的有限体积法

为准确评价小浪底傍河地下水源地的可采资源。根据小浪底傍河地下水源地的水文地质条件,应用有限体积法评价该水源地的可采资源,提出2种开采方案。结果显示：此方法对该区地下水资源所做的评价正确,反演计算的水文地质参数合理。     

AN ANALYSIS OF THE SEISMIC CHARACTERISTICS OF STEEL-JACKETED CIRCULAR BRIDGE COLUMNS

The current approach for seismic retrofit of deficient bridge columns in California involves extensive use of steel jacketing. In this paper, the influence of steel jacketing on the lateral response of circular bridge columns is studied; particularly, the enhancement of the ultimate compressive strain of concrete, the increase in curvature ductility capacity and the increase in lateral stiffness are investigated. The current steel jacket thickness used in California is shown to enhance the ultimate compressive strain of concrete by 4–9 times the spalling strain of unconfined concrete. For larger steel jacket thickness, the ultimate limit state of steel-jacketed columns may be governed by the low-cycle fatigue fracture of the longitudinal reinforcement instead of the ultimate compressive strain of concrete. Steel jacketing is also expected to increase significantly the lateral stiffness of columns if full-height steel jackets are used. The increase in lateral stiffness of flexural columns (3⩽L/D⩽9) is estimated to be 35–60 per cent using current jacket thickness. Inelastic dynamic analyses of steel-jacketed columns using ground motions recorded during the 1989 Loma Prieta earthquake indicated that the current steel jacket thickness provides adequate protection against the damage potential of the ground motions with comparable spectral acceleration as that specified in current design spectra, and the damage sustained by the steel-jacketed column is likely to be repairable.     

ANALYSIS OF PILES USED FOR SLOPE STABILIZATION

Piles used for the stabilization of slopes have to be adequately designed to resist the induced lateral loads due to the movement of the unstable slope. In this paper, a numerical method is presented for the analysis of this problem. In this approach, the piles are modelled using beam finite elements. The soil response at the individual piles is modelled using the modulus of subgrade reaction and pile–soil–pile interaction considered using the theory of elasticity. Two case histories, one for single pile and the other for pile group, are analysed which show that the numerical model can predict the general characteristics of the piles reasonably well. The study suggests that the design of the piles based on the computed response from single pile analysis, ignoring group effects, may be unduly conservative.     

考虑坡度效应的水平受荷桩应变楔计算方法

由于坡度效应的存在,常规方法并不适用于斜坡上水平受荷桩的计算,首先开展了斜坡上基桩的横向加载破坏试验,以确定斜坡上基桩的破坏模式。在此基础上,沿坡体方向对破坏土楔体进行斜向单元划分,提出了考虑坡度效应的土体应变楔模型,对于其中的关键参数应变楔深度与应变楔土体应变采用迭代求解。迭代过程中,建立基桩横向受荷的桩-土相互作用方程并用有限杆单元法求解,当求解得到的桩身地面处位移与应变楔模型中地面处土体位移之差小于某一允许值时,得到的基桩的水平位移及内力即为最终解答。通过与试验测试数据的对比,验证了该方法的合理性。最后,将土体破坏深度与边坡斜率的比值定义为陡坡效应影响范围,并对其影响因素进行了对比分析。结果表明,陡坡效应的影响范围受土体强度参数及基桩尺寸等多因素影响,其随着桩径的增加而减小,且随土体强度的增强而减小。