结构设计地震作用效应影响因素及规律分析

基于现行《建筑抗震设计规范》（GB50011－2001），本文分析了现行抗震设计中影响结构设计地震作用效应的主要因素，以规则平面框架对例对新旧规范影响结构设计地震作用效应的因素进行了对比，给出了其间的重要变化和基本规律。     

夯扩桩半模夯扩试验及夯扩机理探讨

设计了夯扩桩半模夯扩试验，采用读数显微镜直接测读上体质点位移，获得了不同密度的均匀砂土中砂粒的位移，由此确定土体的位移场和密度场。借鉴魏西克（Ｖｅｓｉｃ）球形孔穴膨胀理论和梅耶霍夫（Ｍｅｙｅｒｈｏｆ）塑性剪切理论，结合模型试验成果，对夯扩机理作了探讨，并定性地提出了夯扩机理模式。     

深基坑排桩—圈梁支护结构协同作用研究

排桩－圈梁的协同作用对深基坑支护结构的变形和内力有着重要的影响，为此对深基坑排极支护结构进行了弹性地基梁有限元分析，得出一些有意义的结论。     

广州珠江西航道,流溪河有机污染特征与感潮作用

珠江西航道和流溪河在广州市区上游，为广州市主要水源区。由于感潮作用，受市区严重污染的水体因涨潮上溯而上游传输。严重影响上游水质。因此，弄清感潮作用对广州水源区水质的影响程度和范围，对水源保护与利用有重要意义。本研究从下游到上游，对水源区底泥中有机物特征进行了分析，结果表明：（１）从上游到上游，受感潮作用影响逐渐减小，污染程度逐渐减轻；（２）水源区有机物特征呈有规律变化。从靠近城市的下游到远离城市的     

Erosion rates of alpine bedrock summit surfaces deduced from in situ Be and Al

We have measured the concentration of in situ produced cosmogenic ¹⁰Be and ²⁶Al from bare bedrock surfaces on summit flats in four western U.S. mountain ranges. The maximum mean bare-bedrock erosion rate from these alpine environments is 7.6 ± 3.9 m My⁻¹. Individual measurements vary between 2 and 19 m My⁻¹. These erosion rates are similar to previous cosmogenic radionuclide (CRN) erosion rates measured in other environments, except for those from extremely arid regions. This indicates that bare bedrock is not weathered into transportable material more rapidly in alpine environments than in other environments, even though frost weathering should be intense in these areas. Our CRN-deduced point measurements of bedrock erosion are slower than typical basin-averaged denudation rates ( 50 m My⁻¹). If our measured CRN erosion rates are accurate indicators of the rate at which summit flats are lowered by erosion, then relief in the mountain ranges examined here is probably increasing.

We develop a model of outcrop erosion to investigate the magnitude of errors associated with applying the steady-state erosion model to episodically eroding outcrops. Our simulations show that interpreting measurements with the steady-state erosion model can yield erosion rates which are either greater or less than the actual long-term mean erosion rate. While errors resulting from episodic erosion are potentially greater than both measurement and production rate errors for single samples, the mean value of many steady-state erosion rate measurements provides a much better estimate of the long-term erosion rate.     

悬吊式钢混结构体系抗震试验与分析

悬吊式钢混结构体系是一种新型结构体系，通过一榀1／2比例此种框架的拟静力试验，研究了这种结构在低周反复水平荷载作用下的受力特点、变形和耗能能力以及破坏机理等，试验表明此种框架与传统异形柱框架的性能不同，为此种结构体系的应用提供了试验基础。     

国内外PMP/PMF的发展和实践

对20世纪80年代以来PMP／PMF在国内外的发展和实践情况作了简要的介绍和评论。内容包括PMP／PMF定义、估算方法、成果合理性检查和概率。PMP估算方法包括概化估算法、当地暴雨放大、暴雨移置、暴雨组合、推理模式和统计估算法。PMF估算着重介绍了由PMP转化为PMF的产流和汇流特点，以及目前在南非和法语非洲国家广泛应用的经验公式。     

类石材料--灰泥的冻融过程

Serious failure on the slope of rock ground can be caused by a cyclic action of freezing and thawing in the cold regions. The frost susceptibility and the effect of freezing and thawing onthe rock material, however, have not been well investigated. In order to find out the freezing effect on the rock materials, mortar specimens are frozen as a pseudo-rock material under the constant rate of freezing by means of controlling the temperature of both ends of specimen. The freezing process is given one-dimensionally to the cylindrical samples in the laboratory to simulate the in-situ freezing phenomena in the natural ground. Formation of ice lens, frost heave and water intake during freezing process are observed on the mortar specimen under constant freezing rate, which probably causes cracks or large deformation in the real rock ground. The values of the velocity of elastic wave propagation are compared before and after freezing process to estimate the degree of weathering due to freezing and thawing.     

变形监测基准点的稳定性检验

基准点的稳定性评价，是变形观测数据处理时不可忽视的重要内容。该文对基准点构网和不构网2种情况时的数据处理方法进行了探讨。     

Further examples of ventifacts and unusual patterned ground from the Falkland Islands, South Atlantic

Abstract Examples of ventifacts and forms of unusual patterned ground that differ in situation, characteristics and/or origin to types reported previously are described from the Falkland Islands, South Atlantic. The ventifacts, represented by clasts projecting from an eroding tillite shore platform, have been grooved by the passage of windblown sand. The patterned ground forms comprise stone polygons on clay loam regolith, stone polygons on peat, peat‐filled desiccation cracks on peat, and clusters of on‐edge clasts (stone packings) on a gravel beach. Aeolian transport of particles is considered responsible for the infill of the polygonal cracks. The clusters of on‐edge clasts are thought to have developed as a result of wave action, in particular backwash and/or undertow. Although these features occupy small surface areas they provide useful information about local geomorphic processes and testify to the marked diversity of such features in nature.