A preliminary study of the carbon-isotopic content of ambient formic acid and two selected sources: Automobile exhaust and formicine ants

Relatively large quantities (1 mg) of formic acid have been collected from the atmosphere and subjected to carbon-isotopic analysis, as a means of source discrimination. Ambient formic acid was captured on Ca(OH)₂-treated filters using a high-volume sampler. The collection method was not only efficient (>96%), but also appears to have low artifact production.Most of the samples (36 out of 52) were collected over a two-year period at the summit of Mount Lemmon, Arizona, where a strong seasonality in HCOOH mixing ratio was observed (0.2 ppb during winter months to 1.5 ppb in the summer). Other collection sites included the Oregon coast, Colorado Rockies, urban Tucson, and the North Dakota prairie. The carbon-13 content of atmospheric HCOOH was found to be have little variation (–18 to –25), regardless of location or season. This is consistent with a single dominant source of formic acid. The carbon-14 measurements of 6 Mount Lemmon samples showed high levels of modern carbon (93–113% modern).The emissions from formicine ants and automobile combustion were selected as two other potential sources for isotopic analysis. The HCOOH collected from auto exhaust was much more depleted in¹³C than the atmospheric samples, with a ¹³C of –28.0 and –48.6 from a leaded and unleaded automobile, respectively. Formicine ants, on the other hand, ranged from –17.2 to –20.6.     

The “Zero-order Model” revisited: Paul Schindler's influence on the development of trace metal scavenging models

In 1975 Paul Schindler produced the first oceanic trace metal scavenging model to explicitly include the role of surface chemistry as a control on trace metal water column residence times. The eighteen years that have elapsed since the publication of Schindler's seminal paper have seen the development of a variety of oceanic scavenging models; yet, the fundamental insight of his Zero-order Model remains the benchmark. This paper describes the role of Paul Schindler's work on surface chemistry in providing a framework for the current generation of trace element scavenging models.     

Kinetics of redox cycling of iron coupled with fulvic acid

The kinetics of conversion of iron(III) (hydr)oxides to ferrous iron mediated by fulvic acid have been investigated in order to improve the understanding of the redox cycling of iron at the oxic-anoxic boundary in natural waters. Under the conditions similar to natural waters, fulvic acid is able to reduce the iron(III) (hydr)oxide. The kinetics of the reaction depend on the reactivity of iron(III) (hydr)oxides and the reducing power of the fulvic acid. The rate of reaction is 60 nm/h obtained under following conditions: total concentration of Fe(III) 1.0 × 10^–4 M, pH 7.5, fulvic acid 5 mg/L. The rate is considered as a net result of reduction and oxidation in the > Fe^III-OH/Fe(II) wheel coupled with fulvic acid. In a real natural water system, reductants other than fulvic acid may be of importance. The results obtained in the laboratory, however, provide evidence that the Fe(OH)₃(s)/Fe(II) redox couple is able to act as an electron-transfer mediator for the oxidation of natural organic substances, such as fulvic acid by molecular oxygen either in the absence of microorganisms or as a supplement to microbial activity.     

On the physical model of earthquake precursor fields and the mechanism of precursors＇timespace distribution──origin and evidences of the strong body earthquake──generating model

Ｏｎｔｈｅｐｈｙｓｉｃａｌｍｏｄｅｌｏｆｅａｒｔｈｑｕａｋｅｐｒｅｃｕｒｓｏｒｆｉｅｌｄｓａｎｄｔｈｅｍｅｃｈａｎｉｓｍｏｆｐｒｅｃｕｒｓｏｒｓ＇ｔｉｍｅｓｐａｃｅｄｉｓｔｒｉｂｕｔｉｏｎ──ｏｒｉｇｉｎａｎｄｅｖｉｄｅｎｃｅｓｏｆ　ｔｈｅｓｔｒｏｎ...     

Monoterpene concentrations in and above a forest of scots pine

Diurnal and vertical ambient air measurements of the monoterpenes have been made in and above a Scots pine (Pinus sylvestris) forest of central Sweden, within the boreal northern coniferous biome. Sampling was done with Tenax TA, and analysis by GC and ion trap detection. Daytime mixing ratios were on the order of tenths of a ppbv from the forest floor to the top of the forest, and a factor of 2 or 3 lower above the forest. Mixing ratios at night were at the ppbv level, highest near the forest floor and the crown, and decreased with height above the forest. The highest total concentration observed was 8 ppbv inside the forest at 3 am (GMT). The average terpene composition was 3-carene 32%, -pinene 29%, limonene 18%, -pinene 10%, -phellandrene 7%, camphene 5%, and sabinene at less than 2%. The 3-carene/-pinene ratio varied with wind direction and speed, relative humidity, and wet/dry vegetation, but not with ozone or NO₂ concentration, solar radiation, or temperature. Variations in the observed terpene composition at the sampling site are mainly caused by the influence of other vegetation in the vicinity of the site. It would seem that wet Scots pine emits more 3-carene relative to -pinene than does dry pine.     

Acid leaching of ash and coal: Time dependence and trace element occurrences

The leaching of coal and coal/asphaltite/wood-ashes in sulfuric acid (pH 1.0, 25 °C, S/L, 1:10) was studied as a function of time; acid consumption and extracted metal concentrations are presented. Whole coals consumed acid rapidly during the first few minutes, followed by slow acid consumption. Wood-, lignite-, and asphaltite-ashes consumed acid in two stages, the rapid phase extending < 30 min and the slow phase extended up to 10 days. The rapid phase was dominated by the dissolution of Ca, K and Mg ions for wood-ash, by Ca, Al and Mg ions for lignite-ash and Ca and Mg ions for asphaltite-ash. The sulfur concentration in solution and the concentrations of Ca, Fe, K, Mg, Na, P, Al and Mn in the aqueous phase verified the neutralizing capacity of the untreated ashes as well as the formation of insoluble sulfates in the residues. The slow phase kinetics differed for different fuels and exhibited leaching of several abundant elements—Fe, Al, K, Na and Mn. Trace elements (Ba, Cd, Co, Cr, Cu, Mo, Ni, Pb, Th, U, V, Zn) sometimes required up to 32 h for maximal extraction from ashes. Suggestions are presented regarding the chemical nature of trace elements in the untreated coals and ashes and suitable residence times for economical industrial processes. We think it possible to combine bacteriological oxidation of sulfidic concentrates of acid leaching from ash of various qualities or even whole coals.     

High-resolution sedimentary record of lead in the coastal mud of the East China Sea in the past one hundred and fifty years

In the East China Sea （ECS）, there are some mud areas, including the south coastal mud area, the north coastal mud area, and the mud area to the southwest of Cheju Island. X-ray fluorescence （XRF） techniques and Thermal Ionization Mass Spectrometry （TIMS） were used to study the high-resolution sedimentary record of Pb concentrations and Pb stable isotopic compositions in the past one hundred and fifty years in the coastal mud of the ECS. Pb concentrations of a ^210Pb dating S5 core in the study area have increased rapidly since 1980, and reached the maximal value with 65.08 μg/g in 2000, corresponding to the fast economic development of China since the implementation of the ＂Reform and Open Policy＂ in 1978; ^206Pb/^207Pb ratios generally had stabilized at 1.195 from 1860 to 1966, and decreased gradually from 1966 to 2000, indicating that the anthropogenic source Pb contribution to the ECS has increased gradually since 1966, especially since 1980. Pb concentrations decreased distinctly from 2000 to 2003 and ^206Pb/^207Pb ratios increased from 2001 to 2003, corresponding closely to the ban of lead gasoline from 2000 in China. From 1950 to 2003, there occurred four distinct decrease events of ^206Pb/^207Pb, possibly responding to the Changjiang River （Yangtze River） catastrophic floods in 1998, 1991, 1981 and 1954; from 1860 to 1966, there were two decrease periods of ^206Pb/^207Pb, which may respond to the catastrophic floods of Changjiang River in 1931 and 1935, and 1870. As a result of the erosion and drowning by the catastrophic floods, the anthropogenic lead accumulated in soil and water environments over a long period of time was brought into the Changjiang River, then part of them was finally transported into the ECS, which leads to changes in Pb stable isotopic composition.     

Possibility of degradation of phenylarsonic acid in the presence of ferrihydrite

Although inorganic species are predominant in natural systems, but there are many kinds of organoarsenic species such as methylated and phenylated arsenic compounds. Phenylarsonic acid （PA） is a degradation product of organoarsenics used for chemical warfare agents, which has been detected in well water at the disposal site of the agents in Japan. There are few reports studying behavior of PA in soil. In this study, PA was adsorbed onto ferrihydrite and its chemical forms were determined using high performance liquid chromatography connected to inductivity-coupled plasma mass spectrometry （HPLC-ICP-MS）. 100 mg/kg of PA was mixed with 0.03 g of 2-line ferrihydrite. For each suspension, pH was adjusted by HNO3 or NaOH. Each sample was incubated for more than 19 hours and the final pH was measured. After filtration, the chemical form of arsenic in the filtrate was measured using HPLC-ICP-MS. In addition, ferrihydrite separated by filtration was dissolved by 3 ml of 0.5 M HCI and the arsenic species in the solution was detected by HPLC-ICP-MS （column： Tosoh TSKgel SuperlC-AP, eluent： 0.01 M HNO3）. It was verified that PA is not degraded by heating in 0.5 M HCl solution. At pH 3.1, any arsenic compounds were not detected from the solution, because almost all arsenic species were adsorbed onto ferrihydrite at lower pH. At pH= 12, however, 7%-10% of inorganic arsenic was detected in the solution. In solid phase, there are some problems to determine the precise ratio of inorganic and organic species. When the solution includes Fe ion at 0.01 M level, the retention time of arsenic species drifted compared to those in standard solution, which makes it difficult to determine precisely the arsenic species adsorbed on ferrihydrite. Therefore, more study is needed to determine the ratio of inorganic and organic species in the system.     

Effects of low molecular weight organic acids on sorption and desorption behavior of p-chlorophenol by yellow earth

Low molecular weight organic acids （LMWOAs） are important components of root exudates. They play an important role in immobilizing and remobilizing contaminants in rhizospheric soil. Effects of four LMWOAs on the sorption and desorption behavior of p-chlorophenol by yellow earth was studied in batch mode. The results showed that the previous application of LMWOAs to enhanced adsorption capacity of p-chlorophenol of the soil in the order of maleic acid〉malic acid〉oxalic acid〉citric acid. However, when LMWOAs were applied to soil where p-chlorophenol had been previously adsorbed, substantial p-chlorophenol was desorbed from soil by oxalic acid, whereas citric acid, malic acid and maleic acid didn＇t desorb as much p-chlorophenol from soil as deionized water.     

The acid neutralizing capacity （ANC） of South Africa＇s freshwater ecosystems

Acidification is considered the most important one of the primary chemical stress factors that impact on freshwater ecosystems. In unpolluted freshwater systems, the primary controls on the degree of acidification are factors such as the geological substrate of the catchment area, the presence of organic acids secreted by vegetation in the river system, and equilibrium exchange of carbon dioxide with the atmosphere. Anthropogenic factors that can impact on the degree of acidification of freshwater systems include agricultural, mining and industrial activities, either through direct runoff into river systems or through deposition of atmospheric pollutants from these sources. The capacity factors alkalinity and acidity, which represent the acid- and base-neutralizing capacity （ANC and BCN） of an aqueous system, have been used as more reliable measures of the acidic character of freshwater systems than pH. Unlike pH, ANC and BNC are not affected by parameters such as temperature and pressure. Therefore, ANC has been employed as a predictor of biological status in critical load assessments. Freshwater systems with ANC＇s eq/L isμeq/L are considered sensitive to acidification, ANC=0 μbelow 150 commonly used as the predictor for fish species such as trout in lakes, and an eq/L as more realistic for streams. Acid-neutralizing capacity μANC value of 40 （ANC） can be determined by titration with a strong acid to a preselected equivalence point. Alternatively, it can be calculated as the difference between base cations （[BC]） and strong acid anions （[SAA]）： ANC=[BC]- [SAA]=[Ca^2＋]＋[Mg^2＋]＋[Na^＋]＋[K^＋]-[SO4^2-]-[NO3^-]-[Cl^-] To date, there has been no attempt to establish the ANC of South Africa＇s freshwater ecosystems or variability therein, despite the fact that long-term water quality monitoring data exist for all the parameters needed to calculate it according to the above equations. As a result, the relationship between the acid neutralizing capacity of freshwater ecosystems in South Africa and biodiversity factors, such as fish status, is unknown. Results of the first comprehensive （country-wide scale） evaluation of the acid neutralizing capacity of river systems in South Africa will be presented. Long-term monitoring data obtained from the Department of Water Affairs and Forestry （DWAF） from most of South Africa＇s river systems were used to establish geographic and temporal variabilities in ANC. The results show that the Berg and Breede River systems are most susceptible to acidification, and that geological substrate appears to explain most of the geographic variabilities observed.