时域反射技术在地学研究中的应用

综合介绍了时域反射技术在地学研究中的应用。包括时域反射仪的工作原理、测量参数(特征阻抗、介电常数、土壤含水量、土壤电导率)、时域反射探针技术以及时域反射技术在农业地质、水文地质、灾害地质等研究中的应用与进展。     

南海西南部曾母盆地早中新世以来沉降史分析

采用回剥法和局部均衡模式研究曾母盆地早中新世以来的沉降史，并探讨了该盆地构造演化特征。曾母盆地自早中新世以来经历了17．5-11．6Ma、11．6-5．5Ma、5．5-3．0Ma和3．0-0Ma的4次快速沉降作用，其构造演化受控于曾母地块与南沙地块及婆罗洲地块的碰撞和盆地两侧的万安-卢帕尔断裂与廷贾走滑断裂的综合作用，可划分为南北双向挤压（晚始新世-早中新世）、走滑改造（中中新世-晚中新世）和区域沉降（上新世-第四纪）3个演化阶段。     

明代军事地理研究概述

军事地理是谋兵布防的平台。明代被迫在南北两条战线作战：北部沿长城一线防御少数民族南下；东南沿海抗击倭寇入侵。因此，明代格外重视军事地理的研究，研究成果丰硕，著述很多。概述明代军事地理研究成果，不仅是回顾历史，而是借鉴经验。一些著作中提出的御敌方略至今有参考价值。     

Investigating the propagation mechanism of unmodelled systematic errors on coordinate time series estimated using least squares

The propagation of unmodelled systematic errors into coordinate time series computed using least squares is investigated, to improve the understanding of unexplained signals and apparent noise in geodetic (especially GPS) coordinate time series. Such coordinate time series are invariably based on a functional model linearised using only zero and first-order terms of a (Taylor) series expansion about the approximate coordinates of the unknown point. The effect of such truncation errors is investigated through the derivation of a generalised systematic error model for the simple case of range observations from a single known reference point to a point which is assumed to be at rest by the least squares model but is in fact in motion. The systematic error function for a one pseudo-satellite two-dimensional case, designed to be as simple but as analogous to GPS positioning as possible, is quantified. It is shown that the combination of a moving reference point and unmodelled periodic displacement at the unknown point of interest, due to ocean tide loading, for example, results in an output coordinate time series containing many periodic terms when only zero and first-order expansion terms are used in the linearisation of the functional model. The amplitude, phase and period of these terms is dependent on the input amplitude, the locations of the unknown point and reference point, and the period of the reference point's motion. The dominant output signals that arise due to truncation errors match those found in coordinate time series obtained from both simulated data and real three-dimensional GPS data.     

黑龙江气候变暖的时空变化特征

进入80年代以来，黑龙江气温明显变暖，近120年来年平均气温上升1.4℃，春季次之，气温突变在1990年前后，从年、各季平均气温变化趋势与全国北半球及全球气温变化进行比较，年及冬季我国增暖中心在黑龙江，春季增暖中心在内蒙古北部及黑龙江省；夏秋增暖不明显，但仍有上升趋势，近50年来，50～70年代黑龙江省及全国各大区域普遍增暖不明显，80年代开始黑龙江省增暖明显，三北地区次之，90年代黑龙江增暖更加明显，而全国及其他区域上升已达到80年代北方增温幅度，这里从黑龙江变暖的事实，突变时间，与全球、北半球、全国区域的气温及雪盖海温变化关系来揭示黑龙江气候变化的时空特点。     

显式自由表面模型时间分裂格式的一个积分方案

讨论了有关显式自由表面模型的时间分裂格式中的分裂误差。在传统的积分方案中，由于采用蛙跳格式，斜压动量方程具有三层的时间离散结构，但是，正压动量方程在相应的时间层上只有二层的离散结构。因此，正压方程与斜压方程的时间离散结构是不相容的。分析结果表明，这是导致分裂误差的原因。本提出一种能保持时间离散结构相容的正压和斜压方程的时间积分方案。该积分方案的分裂误差很小因此特别适合于需要长期积分的气候研究。该方案在北太平洋的一个自由表面模型中得到了应用。     

Electrical aerosol spectrometer of Tartu University

The electrical aerosol spectrometer (EAS) of the parallel measuring principle at Tartu University is an efficient instrument for rapid measurement of the unstable size spectrum of aerosol particles. The measuring range from 10 nm to 10 μm is achieved by simultaneously using a pair of differential mobility analyzers with two different particle chargers. The particle spectrum is calculated and measurement errors are estimated in real time by using a least-squares method. Experimental calibration ensures reliability of measurement. The instrument is well suited for continuous monitoring of atmospheric aerosol.     

Optimum multiple tuned mass dampers for structures under the ground acceleration based on DDMF and ADMF

Multiple tuned mass dampers (MTMD) consisting of many tuned mass dampers (TMDs) with a uniform distribution of natural frequencies are taken into consideration for attenuating undesirable vibration of a structure under the ground acceleration. A study is conducted to search for the preferable MTMD which performs better and is easily manufactured from the five available models (i.e. MTMD‐1 – MTMD‐5), which comprise various combinations of the stiffness, mass, damping coefficient and damping ratio in the MTMD. The major objective of the present study then is to evaluate and compare the control performance of these five models. The structure is represented by its mode‐generalized system in the specific vibration mode being controlled by adopting the mode reduced‐order approach. The optimum parameters of the MTMD‐1 – MTMD‐5 are investigated to reveal the influence of the important parameters on their effectiveness and robustness using a numerical searching technique. The parameters include the frequency spacing, average damping ratio, tuning frequency ratio, mass ratio and total number. The criteria selected for the optimum searching are the minimization of the maximum value of the displacement dynamic magnification factor (DDMF) and that of the acceleration dynamic magnification factor (ADMF) of the structure with the MTMD‐1 – MTMD‐5 (i.e. Min.Max.DDMF and Min.Max.ADMF). It is demonstrated that the optimum MTMD‐1 and MTMD‐4 yield approximately the same control performance, and offer higher effectiveness and robustness than the optimum MTMD‐2, MTMD‐3, and MTMD‐5 in reducing the displacement and acceleration responses of structures. It is further demonstrated that for both the best effectiveness and robustness and the simplest manufacturing, it is preferable to select the optimum MTMD‐1. Copyright © 2002 John Wiley & Sons, Ltd.     

Study on effects of damping in laminated rubber bearings on seismic responses for a ⅛ scale isolated test structure

The effects of damping in various laminated rubber bearings (LRB) on the seismic response of a ?‐scale isolated test structure are investigated by shaking table tests and seismic response analyses. A series of shaking table tests of the structure were performed for a fixed base design and for a base isolation design. Two different types of LRB were used: natural rubber bearings (NRB) and lead rubber bearings (LLRB). Three different designs for the LLRB were tested; each design had a different diameter of lead plug, and thus, different damping values. Artificial time histories of peak ground acceleration 0.4g were used in both the tests and the analyses. In both shaking table tests and analyses, as expected, the acceleration responses of the seismically isolated test structure were considerably reduced. However, the shear displacement at the isolators was increased. To reduce the shear displacement in the isolators, the diameter of the lead plug in the LLRB had to be enlarged to increase isolator damping by more than 24%. This caused the isolator stiffness to increase, and resulted in amplifying the floor acceleration response spectra of the isolated test structure in the higher frequency ranges with a monotonic reduction of isolator shear displacement. Copyright © 2002 John Wiley & Sons, Ltd.     

Numerical Analysis of Space–Time Finite Element Formulations for Miscible Displacements

A finite element formulation is proposed to approximate a nonlinear system of partial differential equations, composed by an elliptic subsystem for the pressure–velocity and a transport equation (convection–diffusion) for the concentration, which models the incompressible miscible displacement of one fluid by another in a rigid porous media. The pressure is approximated by the classical Galerkin method and the velocity is calculated by a post-processing technique. Then, the concentration is obtained by a Galerkin/least-squares space–time (GLS/ST) finite element method. A numerical analysis is developed for the concentration approximation. Then, stability, convergence and numerical results are presented confirming the a priori error estimates.