计算分带序列的重心法程序

重心法与其它计算原生晕分带序列的方法相比，具有比较明显的优点。本文详细论述了重心法的计算步骤和计算机程序中各主要模块的，说明在此基础上给出该方法的源程序。程序用ＢＡＳＩＣ语言编写，易于操作。     

A method for modelling mass balance in partial melting and anatectic leucosome segregation

A method is proposed for adjusting the mass balance to characterize quantitatively the behaviour of minerals in anatexis. The method is based on an unconstrained simple mixing model that can be expressed as: where B , A ₀, and A _1-n, are compositional vectors of segregate, source rock and source minerals, respectively. The most important concepts are: (1) degree of partial fusion: F^MM= 1/a₀; (2) mineral fractionation index: and (3) plagioclase differentiation index: . For a given mineral, the MFI values have the following meaning: (a) MFI <0: residual phase originated, at least partly, as a product of incongruent melting; (b) 0 > MFI <1: preferential retention in the residue; (c) MFI= 1: identical modal fraction in source and melt; (d) a₀ > MFI > 1: preferential incorporation into the segregate, and (e) MFI > a₀: external contribution to the anatectic system defined by a₀ A ₀. To test the method and illustrate its use, it was applied to two real problems of partial melting in the Peña Negra Anatectic Complex (Central Spain). The first is a very simple case of segregation of a diktyonitic neosome from an orthogneiss through partial melting located in vertical shear zones. This process is characterized by: (1) F^MM= 0.51; (2) active incorporation of K-feldspar, plagioclase and biotite into the segregate; (3) disequilibrium melting of plagioclase; (4) residual behaviour of quartz and ilmenite. The second case concerns the formation of a cordierite-bearing granite from granodioritoid diatexites through an anatectic process, whose most salient characteristics are: (1) F^MM= 0.45; (2) incongruent melting of biotite; (3) residual behaviour of plagioclase, which melted with a PDI of 1.22; (4) preferential incorporation of quartz into the segregate; (5) total extraction of K-feldspar from the residue.     

对钻孔漏失层分类的研究与探讨

目前的漏失层分类方案很难适用于错综复杂多因素影响的孔漏情况。针对这一缺陷,本文通过对影响“似漏失量”的四个主要因素进行分析后提出以“似漏失量”的大小来划分钻孔漏失层类型。该方案简单、实用、便于推广。     

元素分带及其在地质找矿中应用的几个问题

本文介绍了元素分带的研究概况,不同热源体周围元素的分带特征。讨论了将元素分带用于预测盲矿和评价矿体剥蚀程度中值得注意的几个问题。     

Petrological Significance of Zoned Plagioclase in Eldjurti Granite and Mafic Microgranular Enclaves,North Caucasus,Russia

Plagioclase phenocrysts from mafic enclaves and plagioclase from its host granite possess a pat-tern of complex zonation .A plagioclase phenocryst can generally be divided into three parts:an oscillatory, locally patchy zoned core (An47-19),a ring with dusty, more calcic plagioclase (An64-20) and a normally zoned rim composed of sodic plagioclase (An22-3.3). Major discontinuities in zoning coincide with resorption surfaces that are overgrown by the more calcic plagioclase.The cores of large plagioclase phenocrysts from mafic enclaves and host granite show similar zoning patterns and similar compositions, indicating their crystallization under the same conditions .Steep normal zoning of the rims of plagioclases both from host granite and mafic enclaves illustrates a drastic decrease in An content which is considered to have resulted from the continuous differentiation of hybrid magma and efficient heat loss because of the upward emplacement of the residual magma.Wide rims of plagioclases from the host granite against the discrete rims of plagioclases from mafic enclaves indicate that differentiation and cooling lasted much longer in the host granite than in the mafic enclaves.     

新疆且末阿尔金断裂南缘斜长片麻岩锆石U-Pb测年及其地质意义

在阿尔金地块南缘构造混杂岩带中,新发现了多个规模较大的斜长片麻岩块体。运用LA-ICP-MS锆石U-Pb定年分析方法,对阿尔金地块南缘且末大石门地区构造混杂岩带中的斜长片麻岩进行了年代学测定,并初步探讨其地质意义。30个锆石颗粒的28个有效测点,测出的年龄明显分为2个区间:①(1784±41)^(2150±34)Ma之间,加权平均值为(2130±27)Ma(MSWD=0.21,1σ);②(2324±32)^(2684±51)Ma之间,加权平均值为(2520±23)Ma(MSWD=0.06,1σ)。根据该次年龄测试结果和区域调查资料表明,阿尔金地块南缘且末大石门地区,在古元古代存在一期构造-热事件,该期事件与吕梁运动的时限相吻合。     

Regionalization with dynamically constrained agglomerative clustering and partitioning (REDCAP)

Regionalization is to divide a large set of spatial objects into a number of spatially contiguous regions while optimizing an objective function, which is normally a homogeneity (or heterogeneity) measure of the derived regions. This research proposes and evaluates a family of six hierarchical regionalization methods. The six methods are based on three agglomerative clustering approaches, including the single linkage, average linkage (ALK), and the complete linkage (CLK), each of which is constrained with spatial contiguity in two different ways (i.e. the first‐order constraining and the full‐order constraining). It is discovered that both the Full‐Order‐CLK and the Full‐Order‐ALK methods significantly outperform existing methods across four quality evaluations: the total heterogeneity, region size balance, internal variation, and the preservation of data distribution. Moreover, the proposed algorithms are efficient and can find the solution in O(n ²log n) time. With such data scalability, for the first time it is possible to effectively regionalize large data sets that have 10 000 or more spatial objects. A detailed comparison and evaluation of the six methods are carried out with the 2004 US presidential election data.     

Plagioclase weathering in the groundwater system of a sandy,silicate aquifer

The weathering rate of plagioclase was estimated in the groundwater system of a sandy, silicate aquifer formed after the Wisconsin Glacial Stage. The study area is an isthmus lying between Crystal and Big Muskellunge Lakes in northern Wisconsin, USA. Plagioclase occupies 3% of the quartz and K‐feldspar dominated sediments. Groundwater in the study area is recharged in part by precipitation through the isthmus soils and in part by seepage from Crystal Lake, which is of low ionic strength and chemically in steady state. Water analysis revealed that the chemistry of groundwater recharged from Crystal Lake is regulated by mineral dissolution reactions. The rate constant for plagioclase was estimated using mass balances for sodium concentrations along a groundwater flowline from Crystal Lake. For this calculation, various kinds of hydrological/mineralogical information were used: groundwater flow path from oxygen isotope analysis, groundwater travel times from flow modelling, mineral composition from microprobe analysis and surface area of minerals from BET (Brunauer–Emmett–Teller) analysis. The overall range of the estimation was less than an order of magnitude (3·5 × 10^?16 to 3·4 × 10^?15 mol/m²/s). The result is up to three orders of magnitude slower than the previous field estimates, which applied geometric methods in measuring mineral surface areas. However, this result is somewhat higher than the estimates reported by other BET area‐based studies, which were undertaken on soil profiles having different hydrological conditions. This rate difference is interpreted as a result of higher mineral reactivity owing to younger sediment age. The rate difference is smaller when this result is compared with the estimates from the soils of similar age, indicating that the differences in hydrological condition are not sufficient to explain the weathering rate discrepancy between the laboratory and field studies, which is up to five orders of magnitude. Copyright © 2002 John Wiley & Sons, Ltd.     

Flow kinematics in the deeper part of a subduction channel, as inferred from inclusion trails in plagioclase porphyroblasts from the Sambagawa metamorphic rocks, south-west Japan

The subduction and exhumation of accretionary prism metasedimentary rocks are accompanied by large‐strain ductile deformations which may be recorded in microstructures. Porphyroblast microstructures have been a key to unravel the kinematics in such deformed belts. Shape‐preferred orientation (SPO) of epidote and amphibole inclusions that define S‐shaped trails in prograde cores of plagioclase porphyroblasts were analysed from the high‐P/T Sambagawa metamorphic rocks. Inclusions are found to be elongate parallel to the [010] and [001] directions, respectively, and their long‐axis orientations define an internal foliation S_i (best‐fit great circle) and lineation L_i (maximum on the S_i). S‐shaped inclusion trails in the orthogonal sections do not exhibit the same geometries, but rather are grouped into two types, where the foliation intersection axes (FIAs) are nearly perpendicular and parallel to L_i, respectively. These two types of S‐shaped inclusion trails are seen in the sections inclined at low and high angles to the L_i, respectively. However, the latter type commonly consists of composite trails, where the S_i is first rotated about an FIA perpendicular to the L_i (i.e. unique axis), and then about an FIA parallel to the L_i. The S‐shaped inclusion trails are interpreted to have formed by the successive overgrowth of matrix minerals and rotation of the plagioclase porphyroblast cores about a unique axis in non‐coaxial deformation. The rotation of S_i about an FIA nearly parallel to the L_i is perhaps an apparent rotation, caused by the deflection of foliation around the growing prismatic plagioclase grain prior to inclusion into the porphyroblast. This study has for the first time documented the 3‐D geometry of S‐shaped inclusion trails in porphyroblasts from accretionary prism metasedimentary rocks and identified their origin, which helps to understand the flow kinematics in the deeper part of a subduction channel.     

Role of Syn-eruptive Cooling and Degassing on Textures of Lavas from the AD 1783-1784 Laki Eruption, South Iceland

The Laki eruption involved 10 fissure-opening episodes thatproduced 15·1 km³ of homogeneous quartz-tholeiite magma.This study focuses on the texture and chemistry of samples fromthe first five episodes, the most productive period of the eruption.The samples comprise pumiceous tephra clasts from early falloutdeposits and lava surface samples from fire-fountaining andcone-building activity. The fluid lava core was periodicallyexposed at the surface upon lobe breakout, and its characteristicsare preserved in glassy selvages from the lava surface. In allsamples, plagioclase is the dominant mineral phase, followedby clinopyroxene and then olivine. Samples contain <7 vol.% of euhedral phenocrysts (>100 µm) with primitivecores [An* = 100 x Ca/(Ca + Na) >70; Fo > 75; En* = 100x Mg/(Mg + Fe) >78] and more evolved rims, and >10 vol.% of skeletal, densely distributed groundmass crystals (<100µm), which are similar in composition to phenocryst rims(tephra: An*_58–67, Fo_72–78, En*_72–81; lava:An*_49–70, Fo_63–78, En_57–78). Tephra and lavahave distinct vesicularity (tephra: >40 vol. %; lava: <40vol. %), groundmass crystal content (tephra: <10 vol. %;lava: 20–30 vol. %), and matrix glass composition (tephra:5·4–5·6 wt % MgO; lava: 4·3–5·0wt % MgO). Whole-rock and matrix glass compositions define atrend consistent with liquid evolution during in situ crystallizationof groundmass phases. Plagioclase–glass and olivine–glassthermometers place the formation of phenocryst cores at 10 kmdepth in a melt with 1 wt % H₂O, at near-liquidus temperatures(1150°C). Phenocryst rims and groundmass crystals formedclose to the surface, at 10–40°C melt undercoolingand in an 10–20°C cooler drier magma (0–0·1wt % H₂O), causing an 10 mol % drop in An content in plagioclase.The shape, internal zoning and number density of groundmasscrystals indicate that they formed under supersaturated conditions.Based on this information, we propose that degassing duringascent had a major role in rapidly undercooling the melt, promptingintensive shallow groundmass crystallization that affected themagma and lava rheology. Petrological and textural differencesbetween tephra and lava reflect variations in the rates of magmaascent and the timing of surface quenching during each eruptiveepisode. That in turn affected the time available for crystallizationand subsequent re-equilibration of the melt to surface (degassed)conditions. During the explosive phases, the rates of magmaascent were high enough to inhibit crystallization, yieldingcrystal-poor tephra. In contrast, pervasive groundmass crystallizationoccurred in the lava, increasing its yield strength and causinga thick rubbly layer to form during flow emplacement. Lava selvagescollected across the flow-field have strikingly homogeneousglass compositions, demonstrating the high thermal efficiencyof fluid lava transport. Cooling is estimated as 0·3°C/km,showing that rubbly surfaced flows can be as thermally efficientas tube-fed phoehoe lavas. KEY WORDS: lava; crystallization; basalt; cooling rate; pressure; geobarometry; P–T conditions; plagioclase; degassing; Laki, Iceland