昌宁-孟连结合带牛井山早古生代埃达克岩锆石U-Pb年龄、岩石成因及其地质意义

昌宁-孟连结合带是西南三江地区重要的古特提斯结合带,本文报道该带牛井山蛇绿混杂岩带内的早古生代英云闪长岩的锆石U-Pb年龄和Hf同位素、全岩地球化学特征,探讨其岩石成因,揭示早古生代(原)特提斯演化过程和恢复古地理格局。利用LA-ICP-MS对英云闪长岩进行锆石U-Pb定年,获得~(206)Pb/~(238)U加权平均年龄为468±2Ma(MSWD=1.4,n=22),代表岩浆岩结晶时代。对锆石进行原位微区Hf同位素分析获得锆石ε_(Hf)(t)=+1.6~+2.8。牛井山英云闪长岩具有高的SiO_2(61.6%~67.16%),Al_2O_3(15.4%~17.64%),Na_2O(2.93%~3.25%)含量,高的Na_2O/K_2O(3.9~5.4)比值。微量元素具有高Sr(469×10~(-6)~533×10~(-6)),低Yb(0.66×10~(-6)~1.22×10~(-6))和Y(8.5×10~(-6)~16.3×10~(-6)),Eu正异常(1.01~1.37)的特征。此外,在同等SiO 2条件下,还具有相对高的Mg~#和MgO(Mg~#=50~51,MgO=2.84%~3.58%)。这些特征表明英云闪长岩具有高镁埃达克岩的性质。岩石成因研究表明牛井山高镁埃达克岩很可能是俯冲洋壳加上部分大洋沉积物部分熔融并与上覆地幔橄榄岩反应的产物。早古生代洋壳俯冲成因的埃达克岩的发现证明昌宁-孟连特提斯洋演化历史可追溯至约468Ma。昌宁-孟连结合带早古生代岩浆作用与龙木错-双湖结合带早古生代洋壳残片的时代一致、构造属性相似,我们认为昌宁-孟连结合带与木错-双湖结合带可对比,它们代表了一个统一的古生代特提斯大洋残余。     

西天山巴音布鲁克地区早古生代成矿地质环境:岩浆岩及其时代和元素同位素约束

西天山位于中亚造山带(CAOB)西南部,是其重要组成部分。CAOB晚古生代金属成矿环境和过程尤为典型,但早古生代成矿地质环境还不甚清楚。新疆巴音布鲁克地区出露(原定时代晚志留世)巴音布鲁克组火山岩夹浅海相碎屑岩和灰岩,是认识西天山早古生代成矿地质环境的难得对象。巴音布鲁克组出露于Nikolaev-那拉提山北缘断裂与Atbash-Inylchek-那拉提山南缘断裂之间的中天山,在巴音布鲁克地区典型发育,火山岩包括玄武岩、玄武安山岩、英安岩、流纹岩及相应的火山碎屑岩,其中侵入岩有正长斑岩和花岗闪长岩。LA-ICP-MS测得玄武安山岩、英安岩、正长斑岩、花岗闪长岩、流纹岩锆石U-Pb年龄分别为455.6±8.1Ma、444.5±1.9Ma、441.4±1.6Ma、455.4±5.3Ma、424±1.9Ma,岩浆活动于晚奥陶-早志留世,喷出和侵入时代接近,原定巴音布鲁克组地层时代晚志留世应改为晚奥陶-早志留世。这些岩浆岩具有相似的稀土元素地球化学特征,微量元素相比原始地幔均亏损Nb、Ta、P、Ti。玄武岩正的ε(t)=+1.6~+6.7,低的(~(87)~Sr/~(86)NdSr)i=0.70377~0.70489,指示岩浆源区具有亏损地幔特征,弱的Zr-Hf负异常,低的Th/Nb比值,较窄的同位素变化范围暗示地壳混染并不显著,微量元素及铅同位素特征(~(206)Pb/~(204)Pb=18.26~18.77,~(207)Pb/~(204)Pb=15.63~15.69,~(208)Pb/~(204)Pb=38.21~38.34)表明岩浆源区可能是俯冲流体及洋底沉积物交代的地幔楔橄榄岩部分熔融成因。西天山巴音布鲁克地区早古生代岩浆岩应是南天山洋晚奥陶-早志留世向北向中天山陆块之下俯冲在中天山-伊犁板块南缘活动大陆边缘的岩浆产物,指示了陆缘岩浆弧环境。这种陆缘弧环境有利于斑岩铜金成矿系统发育,值得高度关注相关铜金矿的地质找矿。     

华北北缘东段开原地区三叠纪侵入岩年代学及岩石地球化学研究

本文报道了位于华北北缘东段开原地区尖山子岩体、宝兴岩体和树德屯岩体的岩相学、岩石地球化学及年代学特征,探讨了上述岩体的形成时代、岩石成因及其构造环境。锆石U-Pb定年结果表明,尖山子岩体形成于251±1.3Ma,宝兴岩体形成于235±1.3Ma,树德屯岩体形成于224±1.9Ma,说明开原地区三叠纪存在早三叠世、中三叠世和晚三叠世三个时期的岩浆活动。尖山子岩体以二长花岗岩为主,具高硅低镁特征,属钙碱性系列;富集大离子亲石元素Rb、K、Ba、Th,相对亏损Ta、Nb、P、Hf、Zr等高强场元素;δEu=0.55~1.87,(La/Yb)N=6.23~47.9,轻重稀土分馏明显,富集轻稀土,亏损重稀土。宝兴岩体以花岗闪长岩为主,Si O2含量变化较大(52.36%~74.06%),Al2O3含量(14.5%~17.34%),Mg O含量(0.61%~3.66%),属钙碱性系列;富集大离子亲石元素Rb、K、Ba、Th,相对亏损Ta、Nb、P、Ti等高强场元素;无明显的Eu异常,(La/Yb)N=6.81~25.6,轻重稀土分馏较明显,富集轻稀土,亏损重稀土。树德屯岩体以闪长岩为主,岩石具有低硅高镁特征,K2O/Na2O比值为0.33~0.76,显示富K贫Na特征,属钙碱性系列;富集大离子亲石元素Rb、K、Ba、Th,相对亏损Ta、Nb、P、Ti、Hf、Zr等高强场元素;无明显的Eu异常,(La/Yb)N=3.87~10.2,轻重稀土分馏不明显。上述岩石地球化学特征表明,尖山子岩体和宝兴岩体的原始岩浆起源于下地壳基性物质的部分熔融,树德屯岩体的原始岩浆起源于亏损的地幔楔。研究区三叠纪岩浆岩形成于造山阶段挤压环境下。华北北缘东段的挤压碰撞作用一直持续到晚三叠世(224Ma),而造山阶段向造山后阶段的构造转换(挤压地壳加厚向伸展垮塌的环境转换)发生于晚三叠世-早侏罗世(224~180Ma)期间。华北北缘东段中生代岩石圈减薄或破坏始于晚三叠世-早侏罗世(224~180Ma)期间。     

渤海蓬莱9-1中生代花岗岩体岩石地球化学特征及其区域构造意义

蓬莱9-1花岗岩体是渤海海域首次发现的中生代花岗岩,鉴于渤海海域在华北克拉通中的重要构造位置,该花岗岩的形成时代和成因机制的研究对区域构造研究具有重大意义。锆石LA-ICP-MS U-Pb定年结果表明该花岗岩体形成于中侏罗世160~165Ma。花岗岩属于高钾钙碱性系列,为准铝质-过铝质花岗岩;富Al_2O_3(14.84%~17.19%)和Sr(485×10~(-6)~909×10~(-6)),贫Y(0.66×10~(-6)~1.39×10~(-6))和Yb(小于2.0×10~(-6)),无铕的负异常,多数样品表现为铕的弱正异常,表现出C-型埃达克岩特征。表明渤海地区在160~165Ma期间处于挤压地壳增厚环境下,以地壳减薄为标志的克拉通破坏过程彼时尚未发生,其区域动力学环境可能仍处于华北板块-华南板块碰撞拼接的影响范围内。     

湘中龙山大型金锑矿床成矿时代研究——黄铁矿Re-Os和锆石U-Th/He定年

龙山金锑矿床是湘中锑-金矿集区最重要的矿床之一,因缺少适合传统放射性同位素定年的矿物,其成矿时代以往未得到很好的限定,制约了对矿床成因的认识。由于分析测试技术的进步,Re-Os同位素定年技术得到了发展,可对热液矿床中形成的低Re、Os含量的硫化物进行较准确可靠的年龄测定,从而可为低温热液矿床的形成时代提供有效制约。锆石U-Th/He同位素定年,也是近年发展和成熟起来的定年技术,对低温热事件极其敏感,同样是约束低温成矿年龄的重要手段之一。本文采用矿床中黄铁矿Re-Os同位素和蚀变围岩中受成矿热事件影响的锆石U-Th/He同位素定年技术,对龙山金锑矿床的成矿时代进行了研究。定年结果显示:热液成因黄铁矿的Re-Os等时线年龄为195±36Ma,对应于印支晚期;锆石U-Th/He年龄为51.2~133.3Ma,经Ft校正后,U-Th/He年龄分布于93.78~258.29Ma之间,平均值为160.7±7.3Ma,对应于燕山早期。该矿床可能发生了200Ma和160Ma的两次成矿作用;或者矿床形成于200Ma左右,但是受到了160Ma左右岩浆热事件的改造,黄铁矿Re-Os年龄代表成矿年龄,而锆石U-Th/He年龄则代表第二期热事件发生的时间。无论是200Ma左右一次成矿,还是另有160Ma左右的成矿作用叠加,这两个年龄分别与区内两期岩浆活动的时间相当,这表明岩浆事件对驱动矿床的形成发挥了重要的作用。     

Recognition of the early permian volcanic rocks and Its geological significance in chifeng region of inner Mongolia北大核心CSCD

In order to investigate the geological significance of the large area of volcanics in the Uplift bell of Mingshan in western Chifeng,When carrying out the I :5 million regional mineral geological survey in the area,Through the research work of field geology investigation, petrology, LA-1CP-MS zircon U-Pb isotopic dating and regional stratigraphic correlation and so on.Found that the volcano rocks in the area is different from the Late Jurassic-Early Cretaceous volcanic rocks. And the obvious green alteration phenomenon was developed : The dating results of the Hornblende andesite in the lower parts is 273. 6±2. 2 Ma,it should belong to the Permian Elitu formation^ The Volcanics in the area belong to Calc-Alkaline-high-k calc-Alkaline series volcanic rocks. And volcanic magma experienced the separation and crystallization of minerals, it was the product of the continuous evolution of cognate magma, having the Characteristics that from bottom to top Intermediate-Mafic to Acidic magmatic evolution and the REE content increased gradually 0 Studies suggest that the Formation of volcanic rocks in the area is related to the ancient Asian Ocean to the North China block subduction in the Late Paleozoic period . It should be formed in the Archean to Proterozoic crystalline basement and late devonian magma Kemelting eruption, the tectonic environment formation of the volcanics in this area was andreessen arcc.     

Numerical implementation of the installation/mooring line and application to analyzing comprehensive anchor behaviors

With the application of innovative anchor concepts and advanced technologies in deepwater moorings, anchor behaviors in the seabed are becoming more complicated and pose a great challenge to the analytical methods. In the present work, a large deformation finite element (FE) analysis employing the coupled Eulerian–Lagrangian technique is performed to simulate the installation/mooring line, and then is applied to analyzing comprehensive anchor behaviors in the seabed. By connecting cylindrical units with each other using connector elements, the installation/mooring line is constructed. With the constructed installation/mooring line, FE simulations are carried out to investigate comprehensive anchor behaviors in the seabed, including long-distance penetration of drag anchors, keying of suction embedded plate anchors and non-catastrophic behavior of gravity-installed anchors. Through comparative studies, the accuracy of the proposed method is well examined. A parametric study is also undertaken to quantify the effects of the frictional coefficient, initial embedment depth, and soil weight on the profile of the embedded anchor line and the shackle load. The present work demonstrates that the proposed FE model, which incorporates the installation/mooring line and the anchor, is effective in analyzing the comprehensive anchor behaviors in the seabed.     

Experimental and theoretical study of a cylindrical oscillating water column device with a quadratic power take-off model

The wave power extraction by a cylindrical oscillating water column (OWC) device with a quadratic power take-off (PTO) model was studied experimentally and theoretically. In the experiment, a scaled model OWC was tested in a wave flume, with an orifice being used to simulate a quadratic PTO mechanism. In the theoretical analysis, the quadratic PTO model was linearized based on Lorenz's principle of equivalent work, which allows us to perform a frequency domain analysis using an eigen-function matching method. The effects of higher harmonic components and the spatial non-uniformity of the surface velocity inside the chamber were discussed. A semi-analytical model was proposed to understand the viscous loss affecting the measured capture length. Our treatment of the quadratic PTO model was validated by comparing quasi-linear theoretical capture length and the laboratory measurement. Our results also showed that the effects of spatial non-uniformity and viscous loss could be noticeable for shorter waves.     

An Alternative Protocol for Single Zircon Dissolution with Application to (U‐Th‐Sm)/He Thermochronometry

Zircon (U‐Th‐Sm)/He (ZHe) thermochronometry is a powerful tool that has been widely used in geology to constrain the exhumation histories of orogens. In this study, we present an alternative protocol for dissolving zircon grains for determination of parent nuclides. This new alkali fusion procedure developed at the SARM (Service d'Analyse des Roches et des Minéraux) in Nancy, France, is fast (requiring only 2 d, including cleaning steps) and offers several advantages over conventional methods by avoiding: (i) use of HF pressure dissolution and (ii) complete removing of grains from the metal microvials. After dissolution, U, Th and Sm were measured using an ICP‐MS. We tested the new procedure on two different ZHe reference materials, the Fish Canyon Tuff and Buluk Tuff; these provided precision values for ZHe‐age estimations of 9 and 6% (1s), respectively. In addition, using this method, zircons from the Buluk Tuff are shown to be chemically more homogenous and more suitable for assessing the uncertainty of the entire integrated procedure.     

Community‐Derived Standards for LA‐ICP‐MS U‐(Th‐)Pb Geochronology – Uncertainty Propagation,Age Interpretation and Data Reporting

The LA‐ICP‐MS U‐(Th‐)Pb geochronology international community has defined new standards for the determination of U‐(Th‐)Pb ages. A new workflow defines the appropriate propagation of uncertainties for these data, identifying random and systematic components. Only data with uncertainties relating to random error should be used in weighted mean calculations of population ages; uncertainty components for systematic errors are propagated after this stage, preventing their erroneous reduction. Following this improved uncertainty propagation protocol, data can be compared at different uncertainty levels to better resolve age differences. New reference values for commonly used zircon, monazite and titanite reference materials are defined (based on ID‐TIMS) after removing corrections for common lead and the effects of excess ²³⁰Th. These values more accurately reflect the material sampled during the determination of calibration factors by LA‐ICP‐MS analysis. Recommendations are made to graphically represent data only with uncertainty ellipses at 2s and to submit or cite validation data with sample data when submitting data for publication. New data‐reporting standards are defined to help improve the peer‐review process. With these improvements, LA‐ICP‐MS U‐(Th‐)Pb data can be considered more robust, accurate, better documented and quantified, directly contributing to their improved scientific interpretation.