基于克里格法刻画砂岩型铀矿U、Ra和U-Ra平衡系数垂向分布规律——以二连盆地芒来铀矿床为例

砂岩型铀矿是绿色经济可采的重要能源矿种,目前是世界上重要的铀矿勘探类型之一。二连盆地芒来铀矿床、鄂尔多斯盆地纳岭沟铀矿床铀矿体多呈板状产出,板状铀矿体成因备受关注。为研究砂岩型铀矿内部U、Ra和铀镭平衡系数（Kp）分布的垂向分布规律,本文以二连盆地芒来铀矿床为例,采用具有网格精度高优点的克里格插值法研究U、Ra和Kp垂向分布规律,分别利用放射性样品分析数据和定量伽马测井五点式反褶积法反演U含量数据,通过克里格法精细刻画砂岩型矿体中U、Ra和Kp分布的垂向分布规律。研究发现,该矿床板状矿体内部具有卷状的特征,Kp分布形态可以用来判断含氧含铀水的运移方向以及氧化强弱。该方法对研究铀矿体形态、铀矿成矿规律和后续地浸开采具有重要意义。     

Future Changes in Extreme High Temperature over China at 1.5℃-5℃ Global Warming Based on CMIP6 Simulations

Extreme high temperature(EHT)events are among the most impact-related consequences related to climate change,especially for China,a nation with a large population that is vulnerable to the climate warming.Based on the latest Coupled Model Intercomparison Project Phase 6(CMIP6),this study assesses future EHT changes across China at five specific global warming thresholds(1.5℃-5℃).The results indicate that global mean temperature will increase by 1.5℃/2℃ before 2030/2050 relative to pre-industrial levels(1861-1900)under three future scenarios(SSP1-2.6,SSP2-4.5,and SSP5-8.5),and warming will occur faster under SSP5-8.5 compared to SSP1-2.6 and SSP2-4.5.Under SSP5-8.5,global warming will eventually exceed 5℃ by 2100,while under SSP1-2.6,it will stabilize around 2℃ after 2050.In China,most of the areas where warming exceeds global average levels will be located in Tibet and northern China(Northwest China,North China and Northeast China),covering 50%-70%of the country.Furthermore,about 0.19-0.44 billion people(accounting for 16%-41%of the national population)will experience warming above the global average.Compared to present-day(1995-2014),the warmest day(TXx)will increase most notably in northern China,while the number of warm days(TX90p)and warm spell duration indicator(WSDI)will increase most profoundly in southern China.For example,relative to the present-day,TXx will increase by 1℃-5℃ in northern China,and TX90p(WSDI)will increase by 25-150(10-80)days in southern China at 1.5℃-5℃ global warming.Compared to 2℃-5℃,limiting global warming to 1.5℃ will help avoid about 36%-87%of the EHT increases in China.     

美国出口管制下中国外贸风险的省域地理差异

从总贸易、出口、进口、外资和人员5个视角构建对美风险系数,测度和比较各省区市对美外贸风险的地理差异。结果表明：上海、浙江和福建与美国的进出口贸易规模最大,对美国市场的依赖程度最高,面临的综合外贸风险最大;河南尤其需要防范对美国的出口风险;海南、新疆、天津和西藏等需要加强从美国进口的风险管理;重庆除了需要防范对美出口风险外,还因为实际利用美资最多且依赖程度最大,亟需加强外资风险管理。宁夏和山西虽然从美国的引资规模不大,但是对美资的依赖程度最高,亟需提升外资多元化水平。从人员跨境流动风险来看,上海、北京和浙江面临的风险最大。中国各省区市在应对美国出口管制时应该加强外贸风险的识别和管理,针对不同的风险采取差别化的防范和化解措施。     

Tectono-sedimentary evolution of Jurassic–Cretaceous diapiric structures: Miravete anticline,Maestrat Basin,Spain

Integration of extensive fieldwork, remote sensing mapping and 3D models from high-quality drone photographs relates tectonics and sedimentation to define the Jurassic–early Albian diapiric evolution of the N–S Miravete anticline, the NW-SE Castel de Cabra anticline and the NW-SE Cañada Vellida ridge in the Maestrat Basin (Iberian Ranges, Spain). The pre shortening diapiric structures are defined by well-exposed and unambiguous halokinetic geometries such as hooks and flaps, salt walls and collapse normal faults. These were developed on Triassic salt-bearing deposits, previously misinterpreted because they were hidden and overprinted by the Alpine shortening. The Miravete anticline grew during the Jurassic and Early Cretaceous and was rejuvenated during Cenozoic shortening. Its evolution is separated into four halokinetic stages, including the latest Alpine compression. Regionally, the well-exposed Castel de Cabra salt anticline and Cañada Vellida salt wall confirm the widespread Jurassic and Early Cretaceous diapiric evolution of the Maestrat Basin. The NE flank of the Cañada Vellida salt wall is characterized by hook patterns and by a 500-m-long thin Upper Jurassic carbonates defining an upturned flap, inferred as the roof of the salt wall before NE-directed salt extrusion. A regional E-W cross section through the Ababuj, Miravete and Cañada-Benatanduz anticlines shows typical geometries of salt-related rift basins, partly decoupled from basement faults. These structures could form a broader diapiric region still to be investigated. In this section, the Camarillas and Fortanete minibasins displayed well-developed bowl geometries at the onset of shortening. The most active period of diapiric growth in the Maestrat Basin occurred during the Early Cretaceous, which is also recorded in the Eastern Betics, Asturias and Basque-Cantabrian basins. This period coincides with the peak of eastward drift of the Iberian microplate, with speeds of 20 mm/year. The transtensional regime is interpreted to have played a role in diapiric development.     

东昆仑祁漫塔格地区乌兰乌珠尔早古生代花岗岩锆石U-Pb年代学、地球化学及其地质意义

为确定东昆仑祁漫塔格乌兰乌珠尔地区片麻状黑云母花岗岩和二长花岗岩的形成时代、岩石成因、源区性质和构造背景,对该岩石样品进行了锆石U-Pb年代学、地球化学和锆石Hf同位素研究.结果显示:片麻状黑云母花岗岩加权平均年龄为457.5±2.3 Ma,铝饱和指数A/CNK介于0.98～1.02,属准铝质岩石,Na2O/K2O比值...     

Cartographic Design and the Space–Time Cube

This paper reports on the results of an empirical evaluation that aimed to define the effectiveness and efficiency of different visual variables in depicting the Space–Time Cube’s (STC) content. Existing STC applications demonstrate that the most used visual variables are size and colour hue. Less is known, however, about their usability metrics. The research sets design criteria for STC contents, such as space–time paths, based on the cartographic design theory. The visual variables colour hue, colour value, colour saturation, size and orientation have been applied in two different use case studies. Besides, to support the three-dimensional visual environment, depth cues such as shading and transparency were considered too. User tests have been executed based on real-world problems with particular attention for the visualization strategy and data complexity. The outcomes revealed the most efficient and effective visual variables to represent data of various complexities in the STC.     

Cartographic Symbol Design Considerations for the Space–Time Cube

The cartographic representation of geographic phenomena in the space–time cube comes with special challenges and opportunities when compared with two-dimensional maps. While the added dimension allows the display of attributes that vary with time, it is difficult to display rapidly varying temporal data given the limited display height. In this study, we adapt 2D cyclic point symbols to construct 3D surfaces designed along a helical path for the space–time cube. We demonstrate how these complex?3D helical surfaces can display detailed data, including data reported daily over 100 years and data reported in four-hour intervals over a year. To create the point symbols, each value is plotted along the curve of a helix, with each turn of the helix representing one year or week, respectively. The model is modified by varying the radii from the time axis to all points using the attribute value, in these cases maximum daily temperature and four-hourly ridership, and then creating a triangulated surface from the resulting points. Using techniques common to terrain representation, we apply hue and saturation to the surface based on attribute values, and lightness based on relief shading. Multiple surfaces can be displayed in a space–time cube with a consistent time interval facing the viewer, and the surfaces or viewer perspective can be rotated to display synchronized variations. We see this method as one example of how cartographic design can refine or enhance operations in the space–time cube.     

Hydrodynamic performance of a T-shaped floating breakwater

The comprehensive utilization of floating breakwaters, specially acting as a supporting structure for offshore marine renewable energy explorations, has received more and more attention recently. Based on linear water-wave theory, the hydrodynamic performance of a T-shaped floating breakwater is semi-analytically investigated through the matched eigenfunction expansion method (MEEM). Auxiliary functions, to speed up the convergence and improve the accuracy in the numerical computations, are introduced to represent the singular behavior of fluid field near the lower salient corners of the structure. The effects of the height and installation position of the vertical screen on the reflection and transmission coefficients, dynamic response and wave forces are examined. It is found that the presence of the screen shifts the resonance frequency of RAO for both surge and pitch modes to the low-frequency area, while has no effect on heave mode. The identical added masses, damping and transmission coefficients can be obtained in the cases where the screen holds the same distance away from the longitudinal central axis of the upper box-type structure. Moreover, a relatively small pitch response can be achieved in a wide wave–frequency range, when the breakwater is Γ-shaped.     

CFD modelling of a small–scale fixed multi–chamber OWC device

Wave Energy Converters (WECs) have excellent potential as a source of renewable energy that is yet to be commercially realised. Recent attention has focused on the installation of Oscillating Water Column (OWC) devices as a part of harbor walls to provide advantages of cost–sharing structures and proximity of power generation facilities to existing infrastructure. In this paper, an incompressible three–dimensional CFD model is constructed to simulate a fixed Multi–Chamber OWC (MC–OWC) device. The CFD model is validated; the simulation results are found to be in good agreement with experimental results obtained from a scale physical model tested in a wave tank. The validated CFD model is then used for a benchmark study of 96 numerical tests. These investigate the effects of the PTO damping caused by the power take–off (PTO) system on device performance. The performance is assessed for a range of regular wave heights and periods. The results demonstrate that a PTO system with an intermediate damping can be used for all chambers in the MC–OWC device for most wave period ranges, except for the long wave periods. These require a higher PTO damping. An increased incident wave height reduces the device capture width ratio, but there is a noticeable improvement for long wave periods.     

An efficient and robust approach to predict ship self-propulsion coefficients

Achieving a reliable and accurate numerical prediction of the self-propulsion performance of a ship is still an open problem that poses some relevant issues. Several CFD methods, ranging from boundary element methods (BEM) to higher-fidelity viscous Reynolds averaged Navier–Stokes (RANS) based solvers, can be used to accurately analyze the separate problems, i.e. the open water propeller and the hull calm water resistance. However, when the fully-coupled self-propulsion problem is considered, i.e. the hull advancing at uniform speed propelled by its own propulsion system, several complexities rise up. Typical flow simplifications adopted to speed-up the simulations of the single analysis (hull and propeller separately) lose their validity requiring a more complex solver to tackle the fully-coupled problem. The complexity rises up further when considering a maneuver condition. This aspect increases the computational burden and, consequently, the required time which becomes prohibitive in a preliminary ship design stage.The majority of the simplified methods proposed in literature to include propeller effects, without directly solve the propeller flow, in a high-fidelity viscous solver are not able to provide all the commonly required self-propulsion coefficients. In this work, a new method to enrich the results from a body force based approach is proposed and investigated, with the aim to reduce as much as possible the computational burden without losing any useful result. This procedure is tested for validation on the KCS hull form in self-propulsion and maneuver conditions.