芦山M7．0地震余震分布特征

使用双差定位方法,对2013年4月20日08时02分芦山 M 7．0地震后近10天的余震进行重新定位,获得精度较高的重定位结果;在此基础上,对余震空间分布特征进行研究,推测芦山主震的发震断层可能为大川-双石主断裂东侧的一条次级隐伏逆冲断层。     

Earthquake probabilities and magnitude distribution (M ≥ 6.7) along the Haiyuan fault, northwestern China

Introduction Haiyuan fault is a major seismogenic fault in north-central China. One of the most devastat-ing great earthquake in the 20th century occurred near Haiyuan in northwestern China on Decem-ber 16, 1920. More than 220 000 people were killed and thousands of towns and villages weredestroyed during the devastating earthquake. A 230 km long left-lateral surface rupture zone wasformed along the Haiyuan fault during the earthquake with maximum left-lateral displacement of10 m. Pale…     

2014年云南景谷6.6级地震序列震源参数研究

利用290个M_L ≥ 2.5的景谷6.6级地震序列事件的数字波形资料，计算得到其震源参数。结果显示，地震矩M₀数值范围为10¹²~10¹⁶ N·m；拐角频率f_c为3~16 Hz；视应力数值范围为0~15 MPa，平均值是2.14 MPa，中位数为1.39 MPa。同时，各个震源参数之间均存在一定的相关关系；景谷地震序列余震空间分布可分为北段、中段与南段，其视应力高低分布依次为：南段 > 中段 > 北段；表明主震发生后，震源区南段区域的应力水平最高，这可能是后续5.8级\，5.9级强余震均发生在南段的根本原因。在视应力时间变化特征方面，5.8级、5.9级强余震的发生前，震中所在的南段视应力数值存在"逐渐变大-维持稳定"的特点。而后续未发生强余震的北段和中段，其视应力时间变化为早期快速调整，后续逐渐变化到各自区域的视应力均值水平；这类变化表明对于震源区南段，在强余震发生前的短时间内，南段区域首先出现局部应力不断挤压增强，并随后维持相对高值应力水平的"闭锁"状态，直到强余震的发生。因而，震后震源区余震视应力的空间分布对强余震可能产生地点判定有指示作用，其时间变化特征与地震序列中较强地震的发生存在一定的相关性。余震视应力的时空变化对序列后续地震活动的判定有重要指示作用，可为强余震的时空判定提供相应参考。     

1970年通海7.7级地震人员伤亡研究

本详细阐述了通海地震中人员伤亡的空间分布，对人员伤亡率与房屋倒塌率及地震裂度的关系进行了分析。同时讨论了影响人员伤亡的几种主要因素，给出了人员伤亡率与房屋倒塌率及地震裂的经验关系。认为地震主要伤亡区的分布受发震构造的控制，而建筑类型、地形地貌是影响人员伤的主要因素。     

Experimental study on strain field evolution around a simulated thrust fault

Earthquakes result from continuous geodynamic processes. A topic of significant interest for the scientific community is to elaborate on the phenomena governing the faulting and fracturing of crustal rocks. Therefore, in this study, uniaxial compressive shear failure experiments were conducted on Fangshan marble rock samples with a prefabricated slot to simulate thrust faulting. The center of each marble plate (105 mm × 80 mm × 5 mm) was engraved with a 30-mm long double-sided nonpenetrating slot (depth: 2 mm, width: 0.5 mm). The deformation and destruction processes of the rock surface were recorded using a high-speed camera. The digital image correlation method was used to calculate the displacement and strain distribution and variation at different loading stages. The accumulative and incremental displacement fields u and v , strain field e_x and e_y, and shear strain e_xy were analyzed. When the loading level reached its ultimate value, the strain field was concentrated around the prefabricated slot. The concentration reached a maximum at the ends of the prefabricated slot. The magnitude of shear strain reached 0.1. This experiment contributes to our understanding of the dynamic process of active faulting.     

Relocation of shallow earthquakes in southern Alaska using Joint Hypocenter Determination method

A subset of 2660 shallow earthquakes (0–50 km) that occurred from 1988 to 1996 in south central Alaska between 155°W and 145°W and 59°N and 63°N was relocated using the joint hypocenter determination (JHD) method. Both P- and S-wave observations recorded by the regional seismic network were used. Events were relocated in twenty different groups based on their geographic location and depth using two velocity models. As a result of the relocation, the majority of the hypocenters shifted downward, while the epicenter locations did not change significantly. The distribution of the shallow subduction zone earthquakes indicates the existence of two seismically independent blocks, with one block occupying the northeastern part and the other occupying the central and western parts of the study area. The boundary between the blocks is marked by a 15 to 20 km wide seismicity gap to the southeast of 149.5°W and 62°N. The analysis of the fault plane solutions for shallow subduction zone earthquakes shows that an overwhelming majority of the solutions represent normal, oblique-normal or strike-slip faulting with predominant WNW-ESE orientation of T-axes. This indicates a down-dip extensional regime for the subducting slab at shallow depths. Very few earthquakes yielded fault plane solutions consistent with thrusting on a contact zone between the overriding and subducting plates. This result may be an indication that currently either the strain energy is not released at the contact zone or it is associated with aseismic motion.     

1992年美国加州兰德斯地震——地壳结构不均匀性对地震发生的影响

为了理解地震的发生和地壳结构不均匀性的关系,利用南加州地震台网的固定台和临时台所记录的2863个兰德斯余震和区域地震,共计107401个P波和19624个S波高质量的到时数据,采用地震层析成像方法得到了兰德斯地震区P波和S波的精细的三维速度结构和泊松比分布．结果显示,地震的发生和分布与地壳结构的横向不均匀性有密切的关系．总体上看,兰德斯地震区余震成丛分布,并被低速块体截断,其中4级以上地震大多分布于P波高、低速异常过渡区域或偏向高速块体一侧,这可能是因为高速区多属地壳脆性介质,易于造成应力集中,导致地震;反之,低速度区则可能代表破碎程度较高、富含流体或温度较高区域,因而更倾向于产生无震变形．基于兰德斯地震区强震震源位置、地震区P波、S波速度异常与泊松比分布推断,兰德斯地震区可能有流体存在．地壳流体易使地壳岩石弱化,从而引发大地震．     

汶川地区震后钢筋混凝土框架结构的地震易损性研究

以汶川地震为研究背景,针对震后典型钢筋混凝土框架结构进行地震易损性研究。基于Cornell理论框架结合汶川地质资料,拟合出考虑场地特点的地震危险性模型,同时定义损伤水平状态及限值指标,以概率解析易损性研究方法为基础,运用考虑地震动参数的解析易损性评估方法绘制汶川地区钢筋混凝土框架建筑的地震易损性曲线。研究结果表明:考虑地震动参数的概率解析易损性研究方法是一种有效的地震易损性评估方法;以PGA作为地震强度输入指标的结构反应,随自振周期的增大体系最大响应的相关性降低,结构各个损伤状态的失效概率均随之增大。     

互层胶结土中正断层地震地表破裂位错特征研究

为了解决采用Trimble GX 3D地面激光三维扫描仪分析互层胶结土中正断层地震地表破裂位错特征时,未有效模拟地表垂直和水平位移的基本特征,获取的地表破裂位错特征结果不准确的问题。提出新的互层胶结土中正断层地震地表破裂位错特征研究方法,先构建地震地表弹性位错模型,分析互层胶结土正断层的地表三维断裂特征,得到地表在受到走滑、逆冲和张开错动导致的地表错位变化情况;再通过正断层地震地表破裂离心机试验,获得互层胶结土中正断层地震地表破裂位错特征。试验结果说明,所提方法可有效分析互层胶结土中正断层地震地表破裂位错特征,且破裂点在土体模型中部和中下部的裂缝深度分别为22.4 m和33.4 m,裂缝上的破裂点处于土体模型的中下部时,裂缝的深度越深。     

四川芦山7.0地震和汶川8.0地震震源区地壳岩石圈变形特征分析

地壳和岩石圈变形特征研究对于深入了解中强地震的深部孕震环境具有重要科学意义.本文联合P和S波远震接收函数偏移成像结果,对发生过芦山7.0地震和汶川8.0地震的龙门山断裂带及附近区域地壳和岩石圈结构进行分析.结果揭示出在青藏高原向四川盆地过渡的龙门山断裂带,Moho面和岩石圈底界面(LAB)呈现出强烈变形,特别是芦山地震和汶川地震震源区下方地壳出现了错断、下凹,岩石圈也呈现下凹变形特征.这种地壳及岩石圈变形所代表的高应力的积累可能是汶川和芦山地震发生的重要深部地球动力学背景.