广西南丹大厂矿区地震活动特征分析

本文收集了2009年12月至2010年4月广西南丹大厂矿区地震监测台网记录到的421次M_L≥0.5可定位地震事件(含爆破)时空分布情况, 从实际调查和波形特征分析排除爆破记录后, 研究震级较大的几次矿震震源机制解, 按小时段统计爆破频次与能量释放关系。 结果表明, 矿震断裂走向与区域构造较为一致。 矿山地下开采量增加以及之前出现的近半年历史上罕见的干旱气象因素, 在震级较大的人工爆破触发下, 影响了局部构造应力场的稳定性, 由此引发了一系列矿震。     

阜新矿震台网无线信道测试

为了提高矿震台网的运行率,保障地震数据的连续率、完整率,对阜新矿震台网的信道进行了测试,主要包括制作传播路径地形剖面图以了解信道传输的视通条件、对信道传播损耗的理论计算及功率储备的测量、进行接收场强及背景干扰的测试以确定传输频点。结果显示,阜新矿震台网无线传输信道的场强在50~73 dB之间,能够保证无线信号传输质量,符合遥测台网建设技术规范要求。     

Verringerung der Schwermetall‐ und Sulfatbelastung in sauren bergbaubelasteten Gewässern durch Aluminiumpräzipitate

Attenuation of Heavy Metals and Sulfate by Aluminium Precipitates in Acid Mine Drainage During the mixing of acid mine waters with nearly neutral tributaries, often precipitates are formed which are high in iron or aluminium. These precipitates cover the river bed for many kilometres. Near the town of Lehesten (Thuringian slate mining area), leachates of slate quarries and waste rock dumps contain high amounts of aluminium, sulfate, copper, nickel, zinc, manganese, and H⁺ ions as a result of the oxidation of incorporated pyrite. These leachates enter the brooks Loquitz, Kleine Sormitz, and Rehbach leading to the phenomenon named above. The contribution of the forming aluminium‐rich precipitates on the attenuation of sulfate and heavy metals by sorption or coprecipitation was studied by analysing the composition of water and sediment samples as well as samples of suspended matter. Sulfate is often considered as conservative tracer in acid mine drainage. However, sulfate does not behave conservatively in this system what might be explained by the adsorption of sulfate to the aluminium precipitates. Instead, conservative behaviour was found for calcium, potassium, chloride, zinc, manganese, and nickel. A formation of jurbanite can be excluded because of the low sulfate contents. The sulfate content of the sediment depends on the pH. At low pH values (4.8) the S/Al ratio corresponds to the theoretical ratio in basaluminite and decreases with rising pH. Sulfate is weakly bound to the solid phase and can easily be replaced by OH^– ions. A formation of basaluminite is possible at low pH values with a fluent transition to aluminium hydroxide. Therefore the precipitates are assumed to consist predominantly of aluminium hydroxide with sulfate being adsorbed to the surface.     

矿震预报可能性的探讨

矿震是危害矿山安全生产的严重灾害,人们在长期生产实践和研究探索中发现,应用断裂力学知识和地震科学知识以及矿山形变测量资料,有可能对矿山地震作出某种预报。     

Structural controls on Tertiary orogenic gold mineralization during initiation of a mountain belt, New Zealand

Two types of structurally controlled hydrothermal mineralization have occurred during folding of fissile schist in southern New Zealand: fold-related mineralization and normal fault-related mineralization. Both types have the same mineralogy and textures, and are dominated by quartz–ankerite veins and silicified breccias with ankeritic alteration. Most mineralized zones are thin (centimetre scale), although host schist is commonly impregnated with ankerite up to 20 m away. Thick (up to 5 m wide) mineralized zones are generally gold-bearing and contain pyrite and arsenopyrite with stibnite pods locally. Some of these auriferous zones have been extensively mined historically despite rugged topography and difficult access. Mineralization occurred during regional tectonic compression in the initial stages of development of the Southern Alps mountain belt at the Pacific–Australian plate boundary in the Miocene. Most of the gold-bearing deposits occur in east to south-east, striking normal faults that cut across mesoscopic folds in a belt that coincides with the southern termination of a regional-scale north trending antiform. Mineralized zones have similar structural control and relative timing to a nearby swarm of Miocene lamprophyre dykes and carbonatites. Limited stable isotopic data (C and O) and trace element geochemistry suggest that there was probably no genetic link between the igneous activity and gold mineralization. However, these two types of fluid flow have been controlled by the same tectonically created crustal plumbing system. This Miocene hydrothermal activity and gold deposition demonstrates that orogenic (mesothermal) mineralization can occur during the inception of an orogenic belt, not just in the latter stages as is commonly believed. These Miocene structures have been preserved in the orogen because the locus of uplift has moved northwards, so the early-formed gold deposits have not yet been structurally overprinted or eroded.     

贵州海马谷地区金矿矿床特征及成矿模式

本文对海马谷地区金矿进行调查,在贵州安龙海马谷发现北东向陡倾角断层控制金矿体,其围岩为二叠系茅口组生物灰岩,矿石为硅化灰岩角砾岩。根据本次调查及收集已有勘查研究成果,建立了该区的成矿模式,认为该区北东向陡倾角断层是下一步该区重要的找矿目标。     

强度折减法在滑坡稳定性分析中的应用

沁水县侯村煤矿边坡处治后,I~III段使用良好,IV段抗滑挡墙失效。本文采用有限元强度折减法计算,强度指标比原定的降低了1.29倍。同时,在折减过程中,通过计算分析剪应力集中部位,确定滑面是在老滑面的基础上发展的部分新滑面,形成新的剪出口。利用折减后强度参数,计算对比新滑面与次级滑面的滑坡推力,认为挡墙破坏为新滑面推力过大所致,与原设的“次级滑面为最危险滑面”情况不符,计算结果与实际情况较吻合。     

中国北西部金矿主要类型,分布规律和成矿带划分

本文较系统地总结了我国北西部金矿主要类型、矿化特征和金矿时空分布规律,在此基础上划分出4个成矿区、12条成矿带、32条成矿亚带,从而指明了找矿方向,为贯彻“以铀为主,综合找矿,多种经营,搞活地质”的方针,提供了较好的参考资料。     

载金石英的阳离子效应及其对含矿性的指示意义

石英的阳离子效应指石英结构中Al~(3+)与Si~(4+)的置换作用.在分析海南戈枕断裂金成矿带石英中普遍存在的这一作用,以及由此造成的石英粉末红外谱(IR)、顺磁共振谱(EPR)及热释光曲线(TL)特征,进而讨论了这些特征与金成矿的关系.     

Combined mine tremors source location and error evaluation in the Lubin Copper Mine (Poland)

A modified method of mine tremors location used in Lubin Copper Mine is presented in the paper. In mines where an intensive exploration is carried out a high accuracy source location technique is usually required. The effect of the flatness of the geophones array, complex geological structure of the rock mass and intense exploitation make the location results ambiguous in such mines. In the present paper an effective method of source location and location's error evaluations are presented, combining data from two different arrays of geophones. The first consists of uniaxial geophones spaced in the whole mine area. The second is installed in one of the mining panels and consists of triaxial geophones. The usage of the data obtained from triaxial geophones allows to increase the hypocenter vertical coordinate precision. The presented two-step location procedure combines standard location methods: P-waves directions and P-waves arrival times. Using computer simulations the efficiency of the created algorithm was tested. The designed algorithm is fully non-linear and was tested on the multilayered rock mass model of the Lubin Copper Mine, showing a computational better efficiency than the traditional P-wave arrival times location algorithm. In this paper we present the complete procedure that effectively solves the non-linear location problems, i.e. the mine tremor location and measurement of the error propagation.