四川义敦地区上三叠统曲嘎寺组岩相古地理研究

对四川义敦地区上三叠统曲嘎寺组9幅1：5万区调图幅和44条剖面和沉积等厚线的综合分析研究,认为该区曲嘎寺组主体部分发育了浅海陆棚-泻湖相、开阔碳酸盐台地相、扇三角洲与碳酸盐台地交互相、浅海陆棚相、局限台地相等5种相组合,并可划分为义敦弧后前陆盆地、义敦火山弧及弧内火山洼地、沙鲁里边缘海等3个次级火山-沉积盆地,在义敦初始火山弧内发育有果德火山穹隆、根隆火山穹隆、扎翁拉火山洼地等更次一级的古地貌单元。     

Cenozoic building and deformational processes in the North Patagonian Andes

The Oligocene to present evolution of the North Patagonian Andes is analyzed linking geological and geophysical data in order to decipher the deformational processes that acted through time and relate them to basin formation processes. Seismic reflection profiles reveal the shallow structure of the retroarc area where contractional structures, associated with Oligocene to early Miocene inverted extensional depocenters, are partially onlapped by early to late Miocene synorogenic deposits. From the construction of five structural cross sections along the retroarc area between 40° and 43°30′ S, constrained by surface, gravity and seismic data, a shortening gradient is observed along Andean strike. The highest shortening of 18.7 km (15.34%) is determined near 41°30′ S coincidentally with maximum mean topographic values on the eastern Andean slope, where basement blocks were uplifted in the orogenic front area, and the deepest and broadest synorogenic depocenters were formed towards the foreland. Additionally, eastward shifting of Miocene calc-alkaline rocks occurred at these latitudes, which is interpreted as indicative of a change in the subduction parameters at this time. Deep crustal retroarc structure is evaluated through inversion of gravity models that made possible to infer Moho attenuated zones. These coincide with the occurrence of younger than 5 Ma within-plate volcanics as well as with crustal thermal anomalies suggested by shallowing of the Curie isotherm calculated from magnetic data. Younger volcanism and thermal anomalies are explained by slab steepening since early Pliocene, after a mild-shallow subduction setting in the middle to late Miocene, age of the main compressive event.     

Conceptual and numerical models for groundwater flow in an arid inland river basin

The Heihe River Basin (HRB) is an inland watershed in northwest China with a total area of approximately 130,000 km², stretching from the Qilian Mountains in the south to the oases and agricultural fields in the middle and further to the Gobi desert in the north bordering Mongolia. As part of a major ecohydrological research initiative to provide a stronger scientific underpinning for sustainable water management in arid ecosystems, a regional‐scale integrated ecological and hydrological model is being developed, incorporating the knowledge based on the results of environmental isotope tracer analysis and the multiscale observation datasets. The first step in the model development effort is to construct and calibrate a groundwater flow model for the middle and lower HRB where the oases and vegetation along the Heihe river corridor are highly dependent on groundwater. In this study, the software tool ‘Arc Hydro Groundwater’ is used to build and visualize a hydrogeological data model for the HRB that links all relevant spatiotemporal hydrogeological data in a unified geodatabase within the ArcGIS environment. From the conceptual model, a regional‐scale groundwater flow model has been developed using MODFLOW‐2005. Critical considerations in developing the flow model include the representation of mountainous terrains and fluvial valleys by individual model layers, treatment of aquifer heterogeneities across multiple scales and selection of proper observation data and boundary conditions for model calibration. This paper discusses these issues in the context of the Heihe River Basin, but the results and insights from this study will have important implications for other large, regional groundwater modelling studies, especially in arid and semiarid inland river basins. Copyright © 2014 John Wiley & Sons, Ltd.     

Computation of three-phase capillary entry pressures and arc menisci configurations in pore geometries from 2D rock images: A combinatorial approach

We present a semi-analytical, combinatorial approach to compute three-phase capillary entry pressures for gas invasion into pore throats with constant cross-sections of arbitrary shapes that are occupied by oil and/or water. For a specific set of three-phase capillary pressures, geometrically allowed gas/oil, oil/water and gas/water arc menisci are determined by moving two circles in opposite directions along the pore/solid boundary for each fluid pair such that the contact angle is defined at the front circular arcs. Intersections of the two circles determine the geometrically allowed arc menisci for each fluid pair. The resulting interfaces are combined systematically to allow for all geometrically possible three-phase configuration changes. The three-phase extension of the Mayer and Stowe – Princen method is adopted to calculate capillary entry pressures for all determined configuration candidates, from which the most favorable gas invasion configuration is determined. The model is validated by comparing computed three-phase capillary entry pressures and corresponding fluid configurations with analytical solutions in idealized triangular star-shaped pores. It is demonstrated that the model accounts for all scenarios that have been analyzed previously in these shapes. Finally, three-phase capillary entry pressures and associated fluid configurations are computed in throat cross-sections extracted from segmented SEM images of Bentheim sandstone. The computed gas/oil capillary entry pressures account for the expected dependence of oil/water capillary pressure in spreading and non-spreading fluid systems at the considered wetting conditions. Because these geometries are irregular and include constrictions, we introduce three-phase displacements that have not been identified previously in pore-network models that are based on idealized pore shapes. However, in the limited number of pore geometries considered in this work, we find that the favorable displacements are not generically different from those already encountered in network models previously, except that the size and shape of oil layers that are surrounded by gas and water are described more realistically. The significance of the results for describing oil connectivity in porous media accurately can only be evaluated by including throats with more complex cross-sections in three-phase pore-network models.     

Active tectonics around the junction of Southwest Japan and Ryukyu arcs: Control by subducting plate geometry and pre‐Quaternary geologic structure

The origin of active faults in the Inner zone of the western part of Southwest Japan was explained by a decrease of the minimum principal stress and reactivation of ancient geologic structures. Although the E–W maximum principal stress in Southwest Japan due to the collision of the Southwest and Northeast Japan arcs along the Itoigawa–Shizuoka Tectonic Line is assumed to decrease westward, the density of active strike‐slip faults increases in the western margin of the Southwest Japan Arc (western Chugoku and northern Kyushu) where the subducting Philippine Sea Plate dips steeply. The E–W maximum compressional stress is predominant throughout Southwest Japan, while the N–S minimum principal stress that is presumably caused by coupling between Southwest Japan arc and Philippine Sea Plate decreases due to the weak plate coupling as the plate inclination increases under the western margin of Southwest Japan. The increase of the fault density in the western margin of the arc is attributed to a decrease of the minimum principal stress and consequent increase of shear stress. Low slip rates of the active faults in this region support the view that the westward increase of fault density is not a response to increasing maximum stress. These faults of onshore and offshore lie in three distinct domains defined on the basis of fault strike. They are defined domains I, II, and III which are composed of active faults striking ENE–WSW, NW–SE, and NE–SW, respectively. Faulting in domains I, II, and III is related to Miocene rift basins, Eocene normal faults, and Mesozoic strike‐slip faults, respectively. Although these active faults are strike‐slip faults due to E–W maximum stress, it is unclear whether their fault planes are the same as those of pre‐Quaternary dip‐slip faults.     

Geology of a submarine volcanic caldera in the Tonga Arc: Dive results

A submersible dive conducted on Volcano #1 located near 21° 09′S–175° 45′W on the Tonga Arc showed that the volcanic edifice with a caldera floor area of 30 km² located at and 450 m deep (b.s.l.=below sea level) was constructed recently during episodic volcanism. The sequential volcanic events are recorded along a faulted terrain formed in response to the collapse of the caldera wall. The post-caldera events are marked by occasional eruptions that have built scoriaceous cones associated with low-temperature hydrothermal venting and localized small-scale collapse features. The stratigraphy of the caldera wall indicates that the volcano was built by explosive volcanism alternating with quieter eruptive events. The repeated, violent explosive events formed ≤ 20 m thick sequences composed of alternating fine-grained ash beds and sand- to boulder-sized pyroclastic layers. During quieter volcanic events, dykes and massive flows intruded and/or accompanied the eruption of the volcaniclastic deposits throughout the sections of the wall explored. Massive columnar-jointed flows consist of viscous, silica-rich lavas forming tabular and giant radial-jointed (GRJ) flows formed in large (> 8 m in diameter) conduits and extruded onto the sea floor. In addition, massive lava flows forming sill-like complexes were observed underneath and near the giant radial-jointed columnar flows. Also, an intermittent quiet type of eruption produced vesicular lava flows, which are interbedded within the pyroclastic layered deposits. The massive and vesicular lavas consist of andesites and dacites with Ca-depleted (pigeonite) and Ca-enriched (salite) pyroxene, and intermediate (andesine-labradorite) to calcic (bytownite) plagioclase. They are depleted in total alkalis (Na₂O + K₂O < 3%), K₂O (< 1%), Zr/Y (< 1.8), Nb/Zr (< 0.01) and light Rare Earth Elements. We interpret that these andesite–dacite series were erupted after undergoing crystal-liquid fractionation in a magma chamber located underneath the caldera floor.     

Evolution of West Rota Volcano, an extinct submarine volcano in the southern Mariana Arc: Evidence from sea floor morphology, remotely operated vehicle observations and 40Ar–39Ar geochronological studies

Abstract West Rota Volcano (WRV) is a recently discovered extinct submarine volcano in the southern Mariana Arc. It is large (25 km diameter base), shallow (up to 300 m below sealevel), and contains a large caldera (6 × 10 km, with up to 1 km relief). The WRV lies near the northern termination of a major NNE‐trending normal fault. This and a second, parallel fault just west of the volcano separate uplifted, thick frontal arc crust to the east from subsiding, thin back‐arc basin crust to the west. The WRV is distinct from other Mariana Arc volcanoes: (i) it consists of a lower, predominantly andesite section overlain by a bimodal rhyolite‐basalt layered sequence; (ii) andesitic rocks are locally intensely altered and mineralized; (iii) it has a large caldera; and (iv) WRV is built on a major fault. Submarine felsic calderas are common in the Izu and Kermadec Arcs but are otherwise unknown from the Marianas and other primitive, intraoceanic arcs. ⁴⁰Ar–³⁹Ar dating indicates that andesitic volcanism comprising the lower volcanic section occurred 0.33–0.55 my ago, whereas eruption of the upper rhyolites and basalts occurred 37–51 thousand years ago. Four sequences of rhyolite pyroclastics each are 20–75 m thick, unwelded and show reverse grading, indicating submarine eruption. The youngest unit consists of 1–2 m diameter spheroids of rhyolite pumice, interpreted as magmatic balloons, formed by relatively quiet effusion and inflation of rhyolite into the overlying seawater. Geochemical studies indicate that felsic magmas were generated by anatexis of amphibolite‐facies meta‐andesites, perhaps in the middle arc crust. The presence of a large felsic volcano and caldera in the southern Marianas might indicate interaction of large normal faults with a mid‐crustal magma body at depth, providing a way for viscous felsic melts to reach the surface.     

Permian Tectonic Evolution in the Middle Part of Central Asian Orogenic Belt: Evidence from Newly Identified Volcanic Rocks in the Bilutu Area,Inner Mongolia

In this study, zircon U-Pb ages, geochemical and Lu-Hf isotopic data are presented for the newly identified volcanic rocks which were considered as Bainaimiao group in Bainaimiao Arc Belt(BAB), Inner Mongolia, which could provide important constraints on the evolution of the northern part of North China Block(NCB) and BAB. Basalt to basaltic andesite and andesite to dacite were collected from two sections, which showed eruption ages of 278.2±4.1 Ma and 258.3±3.0 Ma respectively. All samples are characterized by high abundances in Al_2O_3, LREEs, and LILEs, but depleted in HFSEs. Together with high Mg# ratios and low K/tholeiite to calc-alkaline series, these features indicated that basalt to andesite was likely derived from relatively low degree partial melting of the subduction-fluid related mantle in the spinel phase. And dacite was mainly from the partial melting of crust, then affected by mantle. All samples barely went through fractional crystallization process with the slight Eu anomaly. Compared with the contemporary basalt in NCB, rocks in BAB have a complex composition of zircon and a more positive ε_(Hf)(t) value(-6.6–6.4), indicating that they had different magma sources of rocks. Though with different basements, NCB and BAB have become an integrated whole before 278 Ma. Therefore, it could be concluded that NCB and BAB belonged to the active continental margin and the PAO had not closed yet until late Permian and then it disappeared gradually and the CAOB developed into a condition of syn-post collision.     

Across-arc geochemical variation of Quaternary lavas in West Java, Indonesia: Mass-balance elucidation using arc basalt simulator model

The Sunda Arc of Indonesia developed along the convergent margin between the Eurasian and the Australian Plates. More than 100 Quaternary volcanic centers occur along the arc. The West Java Arc is a segment of the Sunda Arc in which more than 10 volcanic centers are located, corresponding to the 120 to 200 km depth contours of the Wadati–Benioff zone. The geochemistry of 207 Quaternary lavas from six centers across the arc was investigated. The lavas range from basalt to dacite. Incompatible element abundances increase from the volcanic front to the rear‐arc in response to a change from low‐K to high‐K suites. Nd–Sr isotope compositions of the basalts scatter between mid‐ocean ridge basalt (MORB) source mantle and Indian Ocean sediment (SED) compositions, with volcanic front low‐K basalts having more radiogenic Nd than the rear‐arc basalts. It is suggested that mixing between slab‐derived fluids mainly from the SED and melt from MORB source mantle played a significant role in determining the geochemistry of the West Java basalts. Incompatible element patterns in primitive mantle normalized multi‐element plots are almost identical across the arc, except for greater inclination and weaker positive Sr spikes in the rear‐arc basalts. This suggests a lower degree of partial melting in the rear‐arc mantle, accompanied by change in SED fluid composition between the volcanic front and the rear‐arc. The latter is confirmed by fluid‐fluxed melting model calculations using multiple trace elements and Nd and Sr isotopes. All the West Java Arc lavas require deficit of Sr from the slab SED. This may occur due to selective breakdown of Sr‐rich hydrous silicate minerals, such as zoisite, at shallower depths before the SED component reaches the depth of dehydration effective for magma genesis. The rear‐arc basalts need further Sr deficits along with lesser fluid. These features are commonly observed in many arc basalts, and are likely attributable to the same mechanism.     

川西义敦岛弧中生代典型花岗岩体矿物学、地球化学特征及岩浆来源探讨

义敦岛弧是位于松潘—甘孜褶皱带和羌塘地体之间的三叠纪火山岛弧。稻城岩体和海子山岩体分别为义敦岛弧上出露的晚三叠世和白垩纪花岗质岩体。结合岩石地球化学,以及偏光显微镜和电子探针(EPMA)、扫描电镜(SEM)对上述岩体进行了系统的矿物学研究,结果表明:两个岩体的主要造岩矿物为斜长石(中长石—更长石),钾长石(正长石)、石英和黑云母(铁叶云母—铁质黑云母),副矿物为锆石、榍石、磁铁矿和磷灰石等;黑云母的成分表明两个岩体的源区均为壳幔混源。稻城岩体属高钾钙碱性系列,具过铝质特征的花岗岩,海子山岩体为高钾钙碱性—钾玄岩系列,同样具过铝质特征。根据锆元素饱和浓度温度计和稀土元素饱和浓度温度计对两个岩体进行了温度限定,稻城岩体岩浆形成的平均上限温度为783℃,海子山岩体岩浆形成时的平均上限温度为844℃。结合前人研究结果,笔者等认为稻城岩体为高分异I型花岗岩,可能为与扬子克拉通有关的晚古元古代至早中元古代的下地壳物质,在甘孜—理塘洋向西俯冲和闭合之后的弧—陆同碰撞背景下,因幔源岩浆的底侵作用而发生部分熔融,同时伴有少量的亏损地幔成分加入,因密度上升至中上—上地壳深度侵位,并且侵位后经历了快速的冷却过程,在侏罗纪之初冷却至300℃以下;海子山岩体为与俯冲有关的造山后伸展环境下形成的白垩纪A2型花岗岩,岩浆来源同样为地壳物质伴有少量地幔物质混合而成,且在地壳中侵位深度较浅,之后经历快速的冷却过程。