四川盆地及邻区下寒武统龙王庙组颗粒滩沉积特征与空间分布

通过对区域地质调查剖面资料和钻井资料的研究,结合对部分野外剖面与钻井岩心的系统观察和取样分析,发现四川盆地及邻区下寒武统龙王庙组的颗粒滩主要由颗粒石灰岩(白云岩)和晶粒白云岩构成;颗粒滩以未暴露浅滩为主,发育向上变浅和向上变深2类垂向序列。川中古隆起和黔中古隆起北部地区的颗粒滩的横向规模大、层位稳定性和连续性最好,其余地区颗粒滩多表现为点滩且规模较小。研究区龙王庙期总体上为西浅东深,西南缘、西北缘和北缘为古陆环抱,盆内呈“一隆两坳”的古地理格局。颗粒岩在古地貌高地具有广覆式“五线一带”的平面分布样式。川中古隆起、黔中古隆起北部地区是颗粒滩发育最有利的地区,东北部和东南部的水下岛链区是优质颗粒滩带发育的潜在区。古隆起发育演化对颗粒滩和有利储集相带具有明显的控制效应,次一级海平面升降变化影响滩体的垂向叠置样式和横向连续性。     

南黄海盆地二叠系烃源岩孢粉相特征及其形成环境

以沉积环境控制烃源岩发育理论为指导,应用孢粉相分析方法,以南黄海盆地二叠系大隆组、龙潭组和栖霞组烃源岩层段为研究对象,对典型钻井剖面的孢粉及沉积有机屑进行系统的分析。根据沉积有机屑的丰度特征和组分类型,探讨三套烃源岩的形成环境,初步评价其生烃潜力。研究结果表明,利用孢粉相分析方法,可以有效地对高成熟海相烃源岩的生烃潜力和形成环境进行客观评价:栖霞组为缺氧远陆架沉积环境,以无定形有机质为主,水体分层缺氧,是烃源岩形成的有利环境;大隆组为缺氧和少氧的陆架环境,也较有利于烃源岩的形成,生烃潜力较栖霞组差;龙潭组煤质型有机质较为丰富,为充氧的陆架区,以陆源输入为主,沉积区水体较浅,含氧量高,不利于富氢烃源岩的形成。     

广东省不动产统一登记信息管理基础平台的设计与实现

提出了广东省不动产登记信息管理基础平台的技术框架,重点对应用系统的体系构成及主要功能、数据库的逻辑结构及物理存储进行了总体设计,通过采用ESB、MyCAT分布式数据库中间件、OLAP多维分析等关键技术实现了平台的开发和应用,为广东省全面开展不动产登记工作提供了重要的技术保障。     

公益性标准地图服务平台的建设与思考

以《地图管理条例》实施为契机,以服务公众和繁荣地图发展为宗旨,创新地图服务模式和机制,设计研发了公益性标准地图服务平台,发布了首批公益性标准地图。平台旨在为公众提供正确的地图数据和实用的地图服务,一方面提供了免费的中国地图、世界地图、专题地图等标准地图的下载服务,另一方面实现了公众在线自助制图功能。笔者以构建国家级公益性标准地图服务平台为目标,对如何为公众提供更优质的公益性地图服务进行了深入思考。     

扬子地块西、北缘中元古代地层的划分与对比

广泛分布于扬子地块西缘和北缘的中元古代地层经历了强烈的变形和绿片岩相的变质改造。根据形成时代,该区的中元古代可以识别出两个阶段,中元古代早期(1.8~1.4Ga)和中元古代晚期(1.4~1.0Ga)。中元古代早期的地层包括大红山群、东川群、河口群和通安组(1~4段),中元古代晚期的地层主要由分布在扬子地块西南缘的昆阳群、会理群和分布于扬子地块北缘的神农架群和打鼓石群组成。新的锆石原位定年结果表明,通安组的凝灰岩形成于1744±14Ma左右,河口群角斑岩形成于1659±23Ma左右,侵入会理群天宝山组的辉长辉绿岩形成于1026±7Ma左右。根据岩石组合、形成环境以及年代学资料,中元古代早期的大红山群、东川群、河口群和通安组(1~4段)形成时代相近,地层组成基本相同,它们都含有与岩浆热液有关的铁氧化物铜金(IOCG)矿床或层状铜矿床(SSC),都在1.75~1.45Ga期间形成于大陆裂解环境。扬子地块北缘的火地垭群也可能属于中元古代早期地层。中元古代晚期地层在扬子地块西缘北缘均有分布,其中的昆阳群和会理群大体形成于1.2~1.0Ga,神农架群和打鼓石群形成于1.4~1.0Ga,它们的顶界可能延伸到新元古代早期。在中元古代晚期的地层中含有大量叠层石,表明它们形成于温暖潮湿的浅海环境。除上述的中元古代晚期地层之外,云南元谋地区的苴林群、川西的登相营群、通安组五段等也属于中元古代晚期的地层。     

扬子板块北缘花山群沉积时代及其对Rodinia超大陆裂解的制约

出露于扬子板块北缘大洪山地区的花山群自下而上由一套以砾岩为主的粗碎屑沉积和一套以砂质板岩为主的细碎屑沉积组成,伴随有拉斑玄武质岩浆活动。花山群整体变质程度不高,形成构造环境复杂,对其构造属性及其与区内所谓的花山"蛇绿混杂岩"的时空关系一直存有争议,它们对新元古代Rodinia超大陆在扬子板块北缘的汇聚-裂解响应具有重要的制约意义。笔者在花山群六房咀组下部细砂岩中采集玄武质熔结凝灰岩夹层样品1件,碎屑岩样品2件,在上覆地层南华系莲沱组采集碎屑岩样品1件;对玄武质熔结凝灰岩进行了SHRIMP锆石U-Pb同位素测年,对碎屑岩样品进行了LA-MC-ICPMS锆石U-Pb同位素测年。获得玄武质熔结凝灰岩锆石U-Pb年龄814.7±7.3 Ma;花山群的碎屑锆石U-Pb年龄谱存在三个明显的峰值:~900 Ma、~2050Ma和~2650 Ma,最显著峰值为~2650 Ma,上覆莲沱组碎屑岩年龄谱的三个峰值为:~900 Ma、~2050 Ma和~2500 Ma,最显著峰值为~2050Ma,三件碎屑岩样品均与扬子板块的碎屑锆石U-Pb年龄统计峰值一致。花山群的碎屑源区可能包括下伏中元古代打鼓石群、太古宙鱼洞子杂岩以及崆岭杂岩。结合前人年代学研究资料和区域构造成果分析,花山群沉积时代应为820~815Ma,形成于伸展构造背景,与花山"蛇绿混杂岩"不是同期同构造背景的产物;花山"蛇绿混杂岩"与花山群沉积建造依次反映了扬子板块北缘由挤压构造背景向伸展构造背景的转换过程。花山群中的碎屑沉积物与基性火山岩、火山碎屑岩属于裂解背景下形成的同时代沉积-火山建造;结合前人在扬子板块周缘发现的大量约820 Ma酸性—基性岩浆活动记录以及同时代(820~800 Ma)的沉积地层,推测花山群形成于Rodinia超大陆裂解背景之下,与超级地幔柱活动有关。     

Reply to the Discussion by Rose of Phelps et al. (2014) ‘Oceanographic and eustatic control of carbonate platform evolution and sequence stratigraphy on the Cretaceous (Valanginian–Campanian) passive margin,northern Gulf of Mexico’, Sedimentology, 61, 461–496

Discussion points raised by Rose ( 2016 ) concentrate on late Albian stratigraphic relationships between formations of the East Texas Basin and the San Marcos Arch of the Comanche Platform in the northern Gulf of Mexico. Criticisms of Phelps et al. (2014) regarding stratigraphic nomenclature, palaeogeography and regional lithostratigraphic correlations generally focus on interpretive aspects of the study or do not account for the full scope of published information. Revisions to the top Aptian–Albian Supersequence boundary by Rose are incompatible with the relative location of a subaerial unconformity, as well as deepening lithofacies trends and retrogradational stratigraphic patterns below the interpreted boundary. Rose's placement of the top Aptian–Albian Supersequence boundary precisely at the Albian–Cenomanian stage boundary also implies ca 1·4 Ma of diachroneity in second order sea‐level patterns between the northern Gulf of Mexico and other documented global sedimentary basins.     

Temporal and environmental significance of microbial lamination: Insights from Recent fluvial stromatolites in the River Piedra,Spain

Despite extensive research, the environmental and temporal significance of microbial lamination is still ambiguous because of the complexity of the parameters that control its development. A 13 year monitored record of modern fast‐accreting calcite stromatolites (mean 14 mm year^?1) from artificial substrates installed in rapid flow in the River Piedra (north‐east Spain) allows comparison of the sedimentological attributes of successive six‐month depositional packages with the known climatic, hydrophysical and hydrochemical parameters of the depositional system. The stromatolites are formed of dense, porous and macrocrystalline composite laminae. The dense and porous composite laminae, which are composed of two to eight laminae consisting largely of calcified cyanobacteria, are characterized by: (i) dense composite laminae, up to 15 mm thick, mostly with successive dense laminae and minor alternating dense and porous laminae; and (ii) porous composite laminae, up to 12 mm thick, consisting mainly of porous laminae alternating with thinner dense laminae. Most of the dense composite laminae formed during the warm periods (April to September), whereas most of the porous composite laminae developed in the cool periods (October to March). Each dense and porous composite lamina represents up to or slightly longer than six months. The alternation of these two types of composite laminae parallels seasonal changes in temperature. The dense and porous laminae result from shorter (for example, intraseasonal) variations in temperature, insolation and hydrological conditions. The macrocrystalline laminae, with crystals >100 μm long, occur isolated and grouped into composite laminae up to 1·7 mm thick. Their occurrence suggests the absence or poor development of microbial mats over periods of weeks to several months. Thus, stromatolite lamination can record different‐order, periodic and non‐periodic changes in the magnitude of environmental parameters over a single year. These results hold important implications for the temporal and environmental interpretation of lamination in microbial structures.     

Seismic characterization of switching platform geometries and dominant carbonate producers (Miocene,Las Negras,Spain)

The primary goals of seismic interpretation and quantification are to understand and define reservoir architecture and the distribution of petrophysical properties. Since seismic interpretation is associated with major uncertainties, outcrop analogues are used to support and improve the resulting conceptual models. In this study, the Miocene carbonates of Cerro de la Molata (Las Negras, south‐east Spain) have been selected as an outcrop analogue. The heterogeneous carbonate rocks of the Cerro de la Molata Platform were formed by a variety of carbonate‐producing factories, resulting in various platform morphologies and a wide range of physical properties. Based on textural (thin sections) and petrophysical (porosity, density, carbonate content and acoustic properties) analyses of the sediments, eleven individual facies types were determined. The data were used to produce synthetic seismic profiles of the outcrop. The profiles demonstrate that the spatial distribution of the facies and the linked petrophysical properties are of key importance in the appearance of the synthetic seismic sections. They reveal that carbonate factory and facies‐specific reflection patterns are determined by porosity contrasts, diagenetic modifications and the input of non‐carbonate sediment. The reflectors of the seismograms created with high‐frequency wavelets are coherent with the spatial distribution of the predefined facies within the depositional sequences. The synthetic seismograms resulting from convolution with lower frequency wavelets do not show these details – the major reflectors coincide with: (i) the boundary between the volcanic basement and the overlying carbonates; (ii) the platform geometries related to changes in carbonate factories, thus sequence boundaries; and (iii) diagenetic zones. Changes in seismic response related to diagenesis, switching carbonate producers and linked platform geometries are important findings that need to be considered when interpreting seismic data sets.     

The oldest Mo porphyry mineralization in the Yangtze Valley Metallogenic Belt of eastern China: Constraints on its origin from geochemistry,geochronology and fluid inclusion studies at Matou

The Matou Mo(-Cu) deposit, located in the Yangtze Valley Metallogenic Belt of central-eastern China, is a typical porphyry-type Mo deposit. The orebodies at the deposit are hosted by Matou porphyritic granodiorite, which is the largest intrusive in the area. Quartz vein-type and disseminated sulfide mineralization are well developed in the porphyry and near its contact with Silurian sandstone. Crosscutting relationships indicate that porphyritic granodiorite is the oldest phase in the pluton, which is crosscut by a porphyritic diorite containing traces of chalcopyrite, and later dolerite dykes. These phases have U-Pb zircon dates of 147 ± 3, 140 ± 1 and 135 ± 1 Ma, which confirms the cross-cutting relationships observed in the field. A Re-Os molybdenite isochron age of 147 ± 4 Ma indicates that the porphyritic granodiorite is the source of the oldest Mo mineralization in the metallogenic belt and was formed during a change of the tectonic setting in the area, from an intracontinental orogeny to extensional tectonics. From 147 to 135 Ma, crust-mantle interaction played an important role in the formation of magmatic rocks at Matou. Systematic petrological and geochemistry investigations reveal that the three phases have a crust source with minor input from the mantle. Investigation of ore-forming fluid, H-O isotopes, S isotopes, and the Re content of molybdenite indicate that the ore-forming fluid and metals were derived from the lower crust. During the evolution of fluid from initial magmatic fluids (stage I) to ore-forming fluids (stage II), fluid boiling accompanied by the input of relatively cooler meteoric water led to the deposition of the Mo mineralization.