东海钙质生物骨屑的矿物学特征

通过电镜、电子探针和X射线等项分析,对东海沉积物中的有孔虫、腹足类、双壳类、苔藓、珊瑚、海胆等骨屑进行了矿物学研究,确定了矿物成分与生物属种的关系,并基于有孔虫壳体化学成分将壳体分为均质壳和异质壳,生物碳酸盐中镁主要富集在方解石及镁方解石中,锶在方解石和镁方解石中的分配系数(D)相似,为0.11—0.14;在文石质骨屑中D=1.09-1.20。碳氧同位素组成与生物属种有明显关系。据一些有孔虫壳体氧同位素偏差值计算的水温来看,本次测定的有孔虫属种的骨屑不能作为理想的骨屑温度计。     

Large-scale environmental influences on the benthic macroinfauna of the southern Gulf of Mexico

The influence of large-scale natural disturbance from winter storms (‘northers’) and river runoff on the macrobenthic community structure of the southern Gulf of Mexico was investigated in both carbonate and transitional carbonate–terrigenous sedimentary environments. Samples of the infauna were obtained in three seasons from 13 stations from two 250 km transects along 80–170 and 20–50 m water depth. Samples after the northers season had the lowest total number of families and individuals, 114 and 2940, respectively, compared to the dry and rainy seasons with 129 and 132 families and 11580 and 15266 individuals, respectively. Spatial patterns of macroinfauna composition varied across and along the shelf as a response to sedimentary environments and depth. Coarser sediments from the carbonate area harboured the highest mean densities per station with 500–24,000 individuals m⁻² and 108–122 families in total, compared to the transitional sediment with 500–8200 individuals m⁻² and 56–74 families across the three seasons. Univariate and multivariate statistical techniques demonstrated that low densities and number of taxa were associated with winter storms, but storm influence was dependent on depth and sediment type. Multiple linear regression analysis and BIOENV analysis indicated that sediment mean grain size, percentage of clay and organic matter best explained the macroinfauna spatial patterns, although BIOENV indicated that depth has an overriding role. An increase in densities of opportunistic taxa (numerous polychaetes of small sizes) was observed four months after the ‘northers’ and this was more evident in the area of carbonate sediment. Additionally a combined disturbance from northers and river runoff is suspected to be responsible for a naturally impoverished macroinfauna community in the transitional sedimentary environment.     

Sediment Deposition and Resuspension in Mouth Bar Area of the Yangtze Estuary

—A comprehensive analysis is conducted based on observations on topography.tidal current.salinity.suspended sediment and bed load during the years of 1982.1983.1988.1989.1996 and 1997 in theYangtze Estuary.Results show that the deformation of tidal waves is distinct and the sand carrying capaci-ty is large within the mouth bar due to strong tidal currents and large volume of incoming water and sedi-ments.Owing to both temporal and spatial variation of tidal current.deposition and erosion are extremelyactive.In general a change of up to 0.1 m of bottom sediments takes place during a tidal period.The maxi-mum siltation and erosion are around 0.2 m in a spring to neap tides cycle.The riverbed is silted duringflood when there is heavy sediment load.eroded during dry season when sediment load is low.The annualaverage depth of crosion and siltation on the riverbed is around 0.6 m.In particular cases.it may increaseto 1.4 m to 2.4 m at some locations.     

长江口深水航道治理一期工程实施对北槽拦门沙的影响

介绍了长江口拦门沙发育及其特点和北槽航道拦门沙形成机理，利用长江口深水航道治理一期工程实施后的地形资料分析治理工程对北槽航道拦门沙影响。结果表明：治理工程建成后，增加了主槽流速，减少了航道回淤，打通北槽航道拦门沙，增加了航道水深，治理工程效果明显。     

长江口三维潮流数值计算及动力分析

采用三维动力学数学模型对长江口潮流场进行了计算，对长江口潮流流态在一个潮周期内逐时进行了分析，并对长江口南支盐水倒灌从动力学角度进行了初步探讨。计算结果表明：文中模型较好地重演长江口潮流场，可以用于大型复杂河口工程实际中的潮流场的计算和分析。     

胜利二号极浅海步行坐底式钻井平台防腐措施研究

本文根据胜利二号极浅海步行坐底钻井平台的作业和工作环境特点，进行了防腐措施研究，设计了切合实际的防腐措施。该平台在海上作业近四年进坞修理，经观测防腐情况良好。     

基于BP人工神经网络的水体遥感测深方法研究

利用Landsat7ETM＋遥感图像反射率和实测水深值之间的相关性,建立了动量BP人工神经网络水深反演模型,并对长江口南港河段水深进行了反演.结果表明：具有较强非线性映射能力的动量BP神经网络模型能较好地反演出长江口南港河段的水深分布情况;由于受长江口水体高含沙量的影响,模型对小于5 m的水深值反演精度较高,而对大于10 m的水深值反演精度较低.     

Patterns and controls of surface sediment distribution: west-central Florida inner shelf

The west-central Florida inner shelf represents a transition between the quartz-dominated barrier-island system and the carbonate-dominated mid-outer shelf. Surface sediments exhibit a complex distribution pattern that can be attributed to multiple sediment sources and the ineffectiveness of physical processes for large-scale sediment redistribution. The west Florida shelf is the submerged extension of the Florida carbonate platform, consisting of a limestone karst surface veneered with a thin unconsolidated sediment cover. A total of 498 surface sediment samples were collected on the inner shelf and analyzed for texture and composition. Results show that sediment consists of a combination of fine quartz sand and coarse, biogenic carbonate sand and gravel, with variable but subordinate amounts of black, phosphorite-rich sand. The carbonate component consists primarily of molluskan fragments. The distribution is patchy and discontinuous with no discernible pattern, and the transition between sediment types is generally abrupt. Quartz-rich sediment dominates the inner 15 km north of the entrance into Tampa Bay, but south of the Bay is common only along the inner 3 km. Elsewhere, carbonate-rich sediment is the predominate sediment type, except where there is little sediment cover, in which cases black, phosphorite-rich sand dominates. Sediment sources are likely within, or around the periphery of the basin. Fine quartz sand is likely reworked from coastal units deposited during Pleistocene sea-level high stands. Carbonate sand and gravel is produced by marine organisms within the depositional basin. The black, phosphorite-rich sand likely originates from the bioerosion and reworking of the underlying strata that irregularly crop out within the study area. The distribution pattern contains elements of both storm- and tide-dominated siliciclastic shelves, but it is dictated primarily by the sediment source, similar to some carbonate systems. Other systems with similar sediment attributes include cool-water carbonate, sediment-starved, and mixed carbonate/siliciclastic systems. This study suggests a possible genetic link among the three systems.     

Validity of sea surface temperature observed with the TRITON buoy under diurnal heating conditions

In order to investigate the validity of buoy-observed sea surface temperature (SST), we installed special instruments to measure near-surface ocean temperature on the TRITON buoy moored at 2.07°N, 138.06°E from 2 to 13 March 2004, in addition to a standard buoy sensor for the regular SST measurement at 1.5-m depth. Large diurnal SST variations were observed during this period, and the variations of the temperatures at about 0.3-m depth could be approximately simulated by a one-dimensional numerical model. However, there was a notable discrepancy between the buoy-observed 1.5-m-depth SST (SST_1.5m) and the corresponding model-simulated temperature only during the daytime when the diurnal rise was large. The evaluation of the heat balance in the sea surface layer showed that the diurnal rise of the SST_1.5m in these cases could not be accounted for by solar heating alone. We examined the depth of the SST_1.5m sensor and the near-surface temperature observed from a ship near the buoy, and came to the conclusion that the solar heating of the buoy hull and/or a disturbance in the temperature field around the buoy hull would contribute to the excessive diurnal rise of the SST_1.5m observed with the TRITON buoy. However, the temperature around the hull was not sufficiently homogenized, as suggested in a previous paper. For the diurnal rise of the SST_1.5m exceeding 0.5 K, the daytime buoy data became doubtful, through dynamics that remain to be clarified. A simple formula is proposed to correct the unexpected diurnal amplitude of the buoy SST_1.5m.     

Structural monitoring of offshore platforms using impulse and relaxation response

Monitoring offshore platforms, long span bridges, high rise buildings, TV towers and other similar structures is essential for ensuring their safety in service. Continuous monitoring assumes even greater significance in the case of offshore platforms, which are highly susceptible to damage due to the corrosive environment and the continuous action of waves. Also, since a major part of the structure is under water and covered by marine growth, even a trained diver cannot easily detect damage in the structure. In the present work, vibration criterion is adopted for structural monitoring of jacket platforms. Artificial excitation of these structures is not always practicable and ambient excitation due to wind and waves may not be sufficient for collecting the required vibration data. Alternate methods can be adopted for the same purpose, for example, the application of an impact or a sudden relaxation of an applied force for exciting the structure. For jacket platforms, impact can be applied by gently pushing the structure at the fender while relaxation can be accomplished by pulling the structure and then suddenly releasing it using a tug or a supply vessel in both cases. The present study is an experimental investigation on a laboratory model of a jacket platform, for exploring the feasibility of adapting vibration responses due to impulse and relaxation, for structural monitoring. Effects of damage in six members of the platform as well as changes in deck masses were studied. A finite element model of the structure was used to analyze all the cases for comparison of the results as well as system identification. A data acquisition and analysis procedure for obtaining the response signatures of the platform due to the impulse and relaxation procedure was also developed for possible adoption in on-line monitoring of offshore platforms. From the study, it has been concluded that both impulse and relaxation responses are useful tools for monitoring offshore jacket platforms. The present work forms the basis for the development of an automated, on-line monitoring system for offshore platforms, using neural networks.