金矿床放射性勘查的良好效果

U、Th、K、Rn等核辐射及含量在含金地质体与非含金地质体间的差异是用放射性方法勘查金矿的地球物理和地球化学条件。大量实例表明 ,各种放射性方法都可在一定条件下用于金矿床勘查 ,并能取得良好效果。不同类型的金矿床 ,Au与 U、Th、K、Rn等有不同的组合关系     

变频激电法在四川某金矿中的应用

本文介绍了用变频激电法寻找含金硫化物矿体 ,通过对视幅频效应 Fs,和交流视电阻率 ρsf的分析 ,取得了良好的地质效果     

山东沂南金场矽卡岩型金铜矿床地质地球化学特征及矿床成因

金场金铜矿床是沂沐断裂带西侧与中生代次火山作用有关金铜矿床的典型代表。该矿地质地球化学特征的综合研究表明“其成矿岩体具有富碱、富钾、富轻稀土和大离子亲石元素的特点，是由成熟度较高的中－下部地壳物质经重熔再生的 产物。     

含金硫化物基岩区红土型金矿的成矿作用

实验表明，在含金硫化物基岩区，硫代硫酸金络阴离子团和硫酸金络阴离子团是金在表生条件下的主要迁移形式，它们的沉淀与铁、锰氢氧化物的形成有密切联系。金的表生迁移－沉淀条件除一般的表生地质条件外，还有特殊的物理化学－生物化学条件。络阴离子团的地球化学性质，控制着红土型金矿床的垂向分带与金的次生富集。     

不透明矿物所含单个低盐度流体包裹体液相组分SAM/AES实验研究:Ⅰ.原理与方法

针对与矿石矿物共存透明脉石矿物所含流体包裹体并不完全代表成矿流体，红外显微技术及EPMA、SEM等常规表面分析手段无法满足不透明矿石矿物所含单个低盐度流体包裹体研究的实际困难，本文首次成功地应用具同步扫描成象功能、电子束斑空间分辨率较高、信噪比较好的PHI595SAM／AES这一当代高灵敏表面分析技术，按单矿物分选→二次去离子水反复超声清洗→外真空热爆→在金属铟片上压制成样的实验流程对新疆阿尔泰多拉纳萨依金矿床含金黄铁矿所含单个低盐度流体包裹体的液相组成进行了静态定点分析，实验取得了满意结果。     

5－（4－羧基苯偶氮）－8－（对甲苯磺酰氨基）－喹啉与金显色反应研究及应用

以８－氨基喹啉为母体，合成了新试剂５－（４－羧基苯偶氮）－８－（对甲苯磺酰氨基）－喹啉（ＣＰＴＳＱ），研究了它与Ａｕ的显色反应，在ＣＴＭＡＢ存在下，于ｐＨ１０～１３的ＮａＯＨ介质中，ＣＰＴＳＱ与Ａｕ形成２：１紫蓝色络合物，最大吸收峰位于６１０ｎｍ，摩尔吸光系数１．０×ｌ０５Ｌ·ｍｏｌ－１·ｃｍ－１，Ａｕ含量在０～１．２ｍｇ／Ｌ内符合比尔定律。方法选择性好，灵敏度高，操作简便，已用于金矿石样品中Ａｕ的测定，结果满意。     

华南（东）变质基底特征、古构造型式及铀、金矿化远景

华南（东）变质基底由杨子及华夏两块不同特征的地质体组成，中元古代之后，该地区分别经过了碰撞对接、拉开、再拼贴的演化过程。碰撞对接带和在古裂谷系基础上成型的陆内推覆及平移、剪切型拼贴带构成了本区基底构造主要型式。铀及金矿远景与基底特征关系密切，铀矿主要产于基底裂隆带部位，金则主要产于裂凹（裂陷）带部位。古基底构造交叉部位是中新生代构造活动活跃部位，受其控制的早期横向火山裂谷盆地，在晚期拉张条件下形成的岩浆杂岩带是铀、金、多金属成矿最佳远景区。     

无锡、常州郊区发生地裂缝

无锡、常州郊区发生地裂缝近年来，无锡石塘湾西蔡一秦村～带、常州横林分别出现了地裂缝，其中以钱桥毛村园最为严重，该处地裂缝于１９９１年夏初步形成，随后不断扩大，目前已具一定规模，长约７００ｍ，总体宽约６０ｍ，呈近东西向分布，并造成附近数十间楼房产生大量...     

Estimation of in situ viscoelastic parameters of weak floor strata by plate-loading tests

Summary This paper explores an approach to estimation of the viscoelastic parameters of weak floor strata using plate-loading tests. Mathematical equations are derived to describe deformation-time history for the standard Burgers model under three-dimensional stress-strain conditions, which are verified with a finite element model. A number of time-dependent in-mine plate-loading tests were conducted and the values of the viscoelastic parameters were estimated based on the derived equation. It is shown that large discrepancies between the parameter values estimated from the plate-loading tests and those acquired from the in-mine convergence data are the results of neglecting adjacent pillar interaction. Finite element modelling was conducted to investigate the effects of adjacent pillar interactions upon the pillar settlement. Based on the finite element analyses, a correction curve was developed to adjust the viscoelastic parameter values to take into account the interaction between adjacent pillars. With the correction, the parameter values estimated from the plate-loading tests compared favourably with those acquired from the in-mine convergence results.     

Feasibility and cost of creating an iron-phosphate coating on pyrrhotite to prevent oxidation

 Acid mine drainage (AMD) occurs when sulfide minerals are exposed to an oxidizing environment. Most of the methods for preventing AMD are either short-term or high cost solutions. Coating with iron phosphate is a new technology for the abatement of AMD. It involves treating the sulfide with a coating solution composed of H₂O₂, KH₂PO₄, and sodium acetate as a buffer agent. The H₂O₂ oxidizes the sulfide surface and produces Fe³⁺ so that iron phosphate precipitates as a coating on the sulfide surface. Experiments performed under laboratory conditions prove that an iron phosphate coating can be established on pyrrhotite surfaces with optimal concentrations of the coating solution in the range of: 0.2M/0.01M H₂O₂, 0.2M KH₂PO₄, and 0.2M sodium acetate NaAc, depending on the experimental scale. Iron phosphate coating may be a long-term solution to the problem of AMD. The method would be easy to implement; the reagent cost, however, is not low enough, although it is lower than the conventional treatment with lime. Received: 30 March 1995 · Accepted: 6 September 1995