车田湾地热田地质地球物理特征及开发前景

车田湾地热田属低温地热资源。热泉分布受ＳＮ向压扭性深大断裂（Ｆ２）与近ＥＷ向张性断裂的复合控制，其断层破碎带为硅化脉充填，表现为高阻地电特征。应用电测深法可以确定其断层破碎带产出位置和延伸方向。用钾镁地热温标计算热田地表温度，用钾钠地热温标计算热田深部温度。根据温度随深度而递增的规律，应用温度－深度曲线方法推算地下某深度的水温，从而可合理开发利用地热资源。     

评价储层含油性的热解参数校正方法及其应用

评价储层含油性时，热解参数Ｓ１＋Ｓ２是一项有效参数。其中Ｓ２相对稳定，Ｓ１则随样品类别或露置时间的不同而发生变化。岩心样品的随钻解分析值比较接近真实，岩屑和井壁取心样品的Ｓ１会明显损失。而目前多数探井心进尺少，大多为岩屑录井。     

云南岩石圈热结构

本文探讨了云南深部热流及岩石圈地温分布的横向变化特征，并将岩石圈热结构概括为３种类型；典型现代构造活动区热结构，中间过渡型地质区热结构和稳定地质区热结构。最后，简单讨论了地热与地震活动的关系。     

Experimental research on reservoir sensitivity to stress and impacts on productivity in Kela 2 Gas Field

Kela 2 Gas Field, with high formation pressure (74.35MPa), high pressure coefficient (2.022) and difficulty of potential test and evaluation, is the largest integrated proved dry gas reservoir in China so far and the principal source for West-East Gas Development Project. In order to correctly evaluate the elastic-plastic deformation of rocks caused by the pressure decline during production, some researches, as the experiment on reservoir sensitivity to stress of gas filed with abnormal high pressure, are made. By testing the rock mechanic properties, porosities and permeabilities at different temperature and pressure of 342 core samples from 5 wells in this area, the variations of petro-physical properties at changing pressure are analyzed, and the applicable inspection relationship is concluded. The average productivity curve with the reservoir sensitivity to stress is plotted on the basis of the research, integrated with the field-wide productivity equation. The knowledge lays a foundation for the gas well productivity evaluation in the field and the gas field development plan, and provides effective techniques and measures for basic research on the development of similar gas fields.     

Preliminary study on the occurrence of geothermal systems in the tectonic compressional regions: an example from the Derman geothermal field in the Biga Peninsula, Turkey

There are numerous hot springs with temperatures ranging from 30 to 100 °C in Biga peninsula and they occur throughout the peninsula. The result of this study shows that the region is under a tectonic compressional regime. The investigation of the faults and fractures in the region indicates that the region has been affected first by N–S and then E–W compression since the Middle Miocene. Opening fractures and antithetic and synthetic faults due to the compressional movements provide paths for the deep circulation of water. In addition, the tectonic movements, granitic intrusion and volcanic activity have also played important roles as heat sources for the geothermal systems.     

中国海相油气田勘探实例(之一) 四川盆地罗家寨大型气田的发现和探明

罗家寨气田发现于2000年,是四川盆地迄今为止发现的储量规模最大的一个气田,2002年探明储量为581.08×108m3。其下三叠统飞仙关组储层由碳酸盐岩蒸发台地边缘优质鲕粒滩白云岩构成,圈闭面积大,构造幅度高,具有一定的埋藏隐蔽性。论述了气田的发现和探明过程,气藏地质的特征,以及对碳酸盐岩气藏勘探的启示。     

Landslide hazard in the Nebrodi Mountains (Northeastern Sicily)

The eastern sector of the Nebrodi Mountains (NE Sicily), a part of the Apenninic-Maghrebian orogenic chain, is characterized by an high landslide hazard. The village of S. Domenica Vittoria, which lies in the area, has been particularly affected by various landslide phenomena, with resulting damage to buildings and infrastructure.The rocks outcropping in the area belong to the Cretaceous Monte Soro Flysch; they consist of an alternation of argillaceous and calcareous beds at the base and argillaceous and quartzarenitic beds at the top. The lithotechnical characteristics of the formation and the steepness of the slopes in the area lead to an elevated instability, as testified by the widespread occurrence of sub-vertical arcuate cliffs (landslide scarps) and sub-horizontal areas (landslide terraces), typical of a landslide-controlled morphology. From a kinematics point of view, the observed phenomena can be referred to multiple rotational slides, flows, and complex landslides, often with a retrogressive development and enlargement. Triggering causes lie principally in the intense rainfalls that determine the decay of the geomechanical properties of the terrain and supply discontinuos groundwater circulation that is evident in seasonal springs. Human activity, such as the construction of roads and buildings on steep slopes and dispersal of water from supply systems and sewers has a significant impact as well.Due to the instability of the area, expansion of the village, which is already limited by the morphological conditions, is made difficult by the high hazard level, especially in the areas at higher elevations, where the principal landslide scarps are located, and even more on the rims of the scarps. Considering the high hazard level, S. Domenica Vittoria has been inserted by the National Geological Service among the sites in Sicily to be monitored by means of a GPS network. The survey carried out along the entire slope hosting the village has furnished the base for geological and geomorphological knowledge needed for the planning of the network, to identify the areas at landslide risk, where parts of the village lie, including the areas of expansion of the village, the main roads, and a portion of the Favoscuro river bed.     

Origin and evolution of Pliocene–Pleistocene granites from the Larderello geothermal field (Tuscan Magmatic Province, Italy)

Extensive, mainly acidic peraluminous magmatism affected the Tuscan Archipelago and the Tuscan mainland since late Miocene, building up the Tuscan Magmatic Province (TMP) as the Northern Apennine fold belt was progressively thinned, heated and intruded by mafic magmas. Between 3.8 and 1.3 Ma an intrusive complex was built on Larderello area (Tuscan mainland) by emplacement of multiple intrusions of isotopically and geochemically distinct granite magmas. Geochemical and isotopic investigations were carried out on granites cored during drilling exploration activity on the Larderello geothermal field. With respect to the other TMP granites the Larderello intrusives can be classified as two-mica granites due to the ubiquitous presence of small to moderate amounts of F-rich magmatic muscovite. They closely resemble the almost pure crustal TMP acidic rocks and do not show any of the typical petrographic features commonly observed in the TMP hybrid granites (enclaves, patchy zoning of plagioclase, amphibole clots). On the basis of major and trace elements, as well as REE patterns, two groups of granites were proposed: LAR-1 granites (3.8–2.3 Ma) originated by biotite-muscovite breakdown, and LAR-2 granites (2.3–1.3 Ma) generated by muscovite breakdown. At least three main crustal sources (at 14–23 km depth), characterized by distinct ε_Nd(t) and ⁸⁷Sr/⁸⁶Sr values, were involved at different times, and the magmas produced were randomly emplaced at shallow levels (3–6 km depth) throughout the entire field. The partial melting of a biotite-muscovite-rich source with low ε_Nd(t) value (about −10.5) produced the oldest intrusions (about 3.8–2.5 Ma). Afterwards (2.5–2.3 Ma), new magmas were generated by another biotite-rich source having a distinctly higher ε_Nd(t) value (−7.9). Finally, a muscovite-rich source with high ε_Nd(t) (about −8.9) gave origin to the younger group of granites (2.3–1.0 Ma). The significant Sr isotope disequilibrium recorded by granites belonging to the same intrusion is interpreted, as due to the short residence time of magmas in the source region followed by their rapid transfer to the emplacement level. Partial melting was probably triggered by multiple, small-sized mafic intrusions, distributed over the last 3.8 Ma that allowed temporary overstepping of biotite- and muscovite-dehydration melting reactions into an already pre-heated crust. Dilution in time of the magmatic activity probably prevented melt mingling and homogenization at depth, as well as the formation of a single, homogeneous, hybrid pluton at the emplacement level. Moreover the high concentrations of fluxing elements (B, F, Li) estimated for the LAR granites modified melt properties by reducing solidus temperatures, decreasing viscosity and increasing H₂O solubility in granite melts. The consequences were a more efficient, fast, magma extraction and transfer from the source, and a prolonged time of crystallization at the emplacement level. These key factors explain the long-lived hydrothermal activity recorded in this area by both fossil (Plio-Quaternary ore deposits) and active (Larderello geothermal field) systems.     

Environmental impact of geothermal fluids on surface water, groundwater and streambed sediments in the Akarcay Basin, Turkey

In this study, the impact of geothermal water on ground and surface waters has been investigated in Akarcay Basin, Turkey. The release of thermal return water from district heating in the city of Afyon and from thermal baths has a considerable environmental impact on the main stream. Historical analyses of stream water quality data show that the present pollution is associated primarily with thermal return water of district heating system. Currently, about 6% of stream water comprises of thermal water. The pollution seems to degrade the water quality in Lake Eber. Streambed sediments were found to be in equilibrium with polluted water and may lead to additional pollution in lake water. Thermal groundwater intrusion to fresh water production wells was detected mainly at sites close to geothermal fields. Solutions to remove thermal water from surface environment are suggested.     

Snow loads on wire mesh and cable net rockfall slope protection systems

Snow load on mesh systems is complicated by many factors. This paper presents field instrumentation data on snow load variation with temperature, snowfall and snow depth on a mesh system. It was found that snow load pattern on mesh systems changed with temperature even without variation in snow depth. It reached its maximum value when the temperature rose just above freezing to melt the interface. The field data was used to formulate appropriate snow load models for the various conditions of temperature in the field. The snow load models were used to study the performance of a number of mesh systems in North America and estimate the interface friction that was prevalent for the different surface conditions.