Testing a proposed new chronology for the Jasmund Glacitectonic Complex (SW Baltic Sea): No indication of incipient deformation during MIS 3

Weichselian advances of the Scandinavian Ice Sheet have generated several glacitectonically deformed structures in the southwestern Baltic Sea area. One example is the 100 km² large Jasmund Glacitectonic Complex (JGC), which was formed proglacially and consists of two subparallel-orientated sets of composite ridges that represent a northern and southern structural complex. The two-part morphological structure of the JGC suggests a formation by two ice advances, one approaching from NE and one from SE direction. So far, this divided structure has been assumed to have been formed by short-time ice-front oscillations during an MIS 2 ice advance. However, based on their recently published ice dynamic model for MIS 3 and the available age data from Jasmund, lüthgens et al. (2020) propose a chronological reinterpretation of the JGC development, according to which two distinct ice advances during early and late MIS 3 formed the JGC. In order to test this novel stratigraphical model for the JGC formation, five OSL samples were taken from fluvial and lacustrine deposits at a key section near Glowe (NW Jasmund). The investigated succession is divided into pre-kinematic sediments, deposited before the glacitectonic deformation, and post-kinematic sediments, deposited after the deformation. Our results show that the youngest dated pre-tectonic sediment has a burial age between ∼40 and 34 ka, which rules out a glacitectonic deformation during an early MIS 3 ice advance (∼60–50 ka). In addition, by reviewing the existing age data set, a development of the JGC during an early and late MIS 3 advance of the SIS must be rejected. Instead, our data confirm the genesis of the JGC during MIS 2.     

Hydrogeochemistry and groundwater salinization in an ephemeral coastal flood plain: Cap Bon,Tunisia

Abstract

The Wadi Al Ayn plain is a coastal system on the eastern coast of Cap Bon in northeastern Tunisia. The area is known for its intensive agriculture, which is based mainly on groundwater exploitation. The aim of this study is to identify the sources of groundwater salinization in the Wadi Al Ayn aquifer system and deduce the processes that drive the mineralization. Surface water and groundwater samples were taken and analysed for major ions and stable isotopes. The geochemical data were used to characterize and classify the water samples based on a variety of ion plots and diagrams. Stable isotopes are useful tools to help us understand recharge processes and to differentiate between salinity origins. The oilfield brines infiltrated from the sandy bed of Wadi Al Ayn comprise the main source of groundwater salinization in the central part of the plain, while seawater intrusion is mainly responsible for the increased salinity in the groundwater of the coastal part of the plain (at Daroufa).

Citation Chekirbane, A., Tsujimura, M., Kawachi, A., Isoda, H., Tarhouni, J., and Benalaya, A., 2013. Hydrogeochemistry and groundwater salinization in an ephemeral coastal flood plain: Cap Bon, Tunisia. Hydrological Sciences Journal, 58 (5), 1097–1110.     

A vortex-tube model of eddies in the inertial range

Abstract

A vortex-tube geometry of the cascade of energy to small-scale eddies, in the inertial range of fully-developed turbulence, is proposed. The model is a special case of the beta model of Frisch, Sulem and Nelkin (1978). We require that the cascade conserve the principal invariants of inviscid, incompressible flow, namely volume, topological knottedness, circulation, and, at discrete times marking the termination of steps in the cascade, energy. The process terminates in a finite time, as in any beta model, leaving behind a self-similar network of “inactive” tubes. We associate a self-similar scaling dimension D with the structure, equal to the Hausdorff dimension of the set of “active” tubes at the termination of the cascade. Because circulation Λ plays a key role in the analysis of the cascade, we refer to these vortex-tube geometries as “gamma models”. The viewpoint throughout is entirely deterministic.

We describe two examples of gamma models. In the ring geometry, an eddy is a vortex ring, and the cascade produces “rings upon rings”, so we allow cutting and fusing of tubes while conserving total helicity. In the preferred helical model, no cutting is needed, and the cascade produces an infinite progression of braided “coils upon coils”. We suggest that latter geometry as a candidate for the topology of a singularity of the inviscid limit of a Navier-Stokes flow, when modeled by discrete vortex tubes.

A crucial ingredient of a gamma model, not explicitly present in a beta model, is the possibility of “splitting” a vortex tube into sub-tubes carrying smaller circulation. We suggest a dynamical basis for this process, as an instability of tubes whose cores violate the Rayleigh criterion.

The parameters describing a gamma model are not uniquely determined by our study, but there is a “simplest” helical gamma model, involving minimal splitting and distortion of tubes. The dimension D of the structure is 13/5, with a scale factor Λ = 2^?5/4. This value of D agrees with that suggested by Hentschel and Procaccia (1982), by analogy with established results for certain branched polymers.     

Moraine development at a small High‐Arctic valley glacier: Rieperbreen,Svalbard

Ice‐cored lateral and frontal moraine complexes, formed at the margin of the small, land‐based Rieperbreen glacier, central Svalbard, have been investigated through field observations and interpretations of aerial photographs (1936, 1961 and 1990). The main focus has been on the stratigraphical and dynamic development of these moraines as well as the disintegration processes. The glacier has been wasting down since the ‘Little Ice Age’ (LIA) maximum, and between 1936 and 1990 the glacier surface was lowered by 50–60 m and the front retreated by approximately 900 m. As the glacier wasted, three moraine ridges developed at the front, mainly as melting out of sediments from debris‐rich foliation and debris‐bands formed when the glacier was polythermal, probably during the LIA maximum. The disintegration of the moraines is dominated by wastage of buried ice, sediment gravity‐flows, meltwater activity and some frost weathering. A transverse glacier profile with a northward sloping surface has developed owing to the higher insolation along the south‐facing ice margin. This asymmetric geometry also strongly affects the supraglacial drainage pattern. Lateral moraines have formed along both sides of the glacier, although the insolation aspect of the glacier has resulted in the development of a moraine 60 m high along its northern margin. Copyright © 2001 John Wiley & Sons, Ltd.     

Subglacial bedform geomorphology of the Irish Ice Sheet reveals major configuration changes during growth and decay

The belated realisation that ribbed (Rogen) moraines form such an integral part of Irish geomorphology, and the piecemeal approach to previous drumlin mapping, is probably responsible for the highly contrasting views of palaeoflow patterns of the Irish Ice Sheet. Using a high resolution (25 m) digital elevation model we present morphological maps of a large part (100 × 100 km) of the so‐called ‘Drumlin Belt’ of north central Ireland. The landforms comprise mostly ribbed moraine much larger than found elsewhere (up to 16 km in length), which in places are superimposed on each other. Contrary to most prior assessments we find the bedform record to contain numerous and overlapping episodes of bed formation (ribbed moraine, drumlins and crag‐and‐tails) that provide a palimpsest record of changing flow geometries. These demonstrate an ice sheet with a centre of mass and flow geometry that changed during growth and decay. Using distinctive flow patterns and relative age relationships between them we reconstruct ice sheet evolution into four phases during a single glacial cycle. In phase 1 (early in the glacial cycle), Scottish and local ice coalesced to form a northeast‐centred Irish Ice Sheet. As it grew its centre of mass migrated southwards, culminating in a major N–S divide positioned down the east of Ireland (phase 2, ca. Last Glacial Maximum). During retreat, the centre of mass migrated at least 120 km northwards and became established in northwest Ireland and at this point a dramatic bedforming event produced one of the world's largest and most contiguous ribbed moraine fields (phase 3). Final deglaciation is thought to be by fragmentation into many topographically controlled minor ice‐caps (phase 4). Rather than any dramatic or unexpected behaviour, the reconstructed phases indicate a relatively predictable pattern of ice sheet growth and decay with changes in centres of mass, and does not require major readvances or ice‐stream events. Copyright © 2001 John Wiley & Sons, Ltd.     

Unveiling buried aeolian landscapes: reconstructing a late Holocene dune environment using 3D ground-penetrating radar

Across the UK, sandy beaches and dunes protect coastal infrastructure from waves and extreme water levels during large-scale storms, while providing important habitats and recreational opportunities. Understanding their long-term evolution is vital in managing their condition in a changing climate. Recently, ground-penetrating radar (GPR) methods have grown in popularity in geomorphological applications, yielding centimetre-scale resolution images of near-surface stratigraphy and structure, thus allowing landscape evolution to be reconstructed. Additionally, abrupt changes in palaeo-environments can be visualized in three dimensions. Although often complemented by core data, GPR allows interpretations to be extended into areas with minimal ground-truth control. Nonetheless, GPR data interpretation can be non-intuitive and ambiguous, and radargrams may not initially resemble the expected subsurface geometry. Interpretation can be made yet more onerous when handling the large 3D data volumes that are facilitated with modern GPR technology. Here we describe the development of novel semi-automated GPR feature-extraction tools, based on ‘edge detection’ and ‘thresholding’ methods, which detect regions of increased GPR reflectivity which can be applied to aid in the reconstruction of a range Quaternary landscapes. Since reflectivity can be related to lithological and/or pore fluid changes, the 3D architecture of the palaeo-landscape can be reconstructed from the features extracted from a geophysical dataset. We present 500 MHz GPR data collected over a buried Holocene coastal dune system in North Wales, UK, now reclaimed for use as an airfield. Core data from the site, reaching a maximum depth 2 m, suggest rapid vertical changes from sand to silty-organic units, and GPR profiles suggest similar lateral complexity. By applying thresholding methods to GPR depth slices, these lateral complexities are effectively and automatically mapped. Furthermore, automatic extraction of the local reflection power yields a strong correlation with the depth variation of organic content, suggesting it is a cause of reflectivity contrast. GPR-interpolated analyses away from core control thus offer a powerful proxy for parameters derived from invasive core logging. The GPR data collected at Llanbedr airfield highlight a complex dune system to a depth of 2.8 m, probably deposited in several phases over ~700 years, similar to elsewhere in North Wales.     

The influence of the bottom contour on the deformed state of the ice cover due to the motion of the submarine

The authors have previously determined that the effectiveness and failure pattern of the ice cover caused by flexural-gravity waves generated by a submerged body motion near the bottom ice can greatly depend on the depth of the water area. In its turn, the presence of a ledge on the ice surface may affect a wave propagation pattern. This paper presents an experimental study of the bottom contour influence on the deflection and length of flexural-gravity waves. The authors describe a numerical model for the analysis of the deformed state of ice caused by hydrodynamic loads due to a submarine motion, taking into account the bottom contour. The experiments are carried out in the ice tank. The results of calculations and experiments are compared.     

Temporal and Spatial Variations of the Aerodynamic Roughness Length in the Ablation Zone of the Greenland Ice Sheet

To understand the response of the Greenland ice sheet to climate change the so-called ablation zone is of particular importance, since it accommodates the yearly net surface ice loss. In numerical models and for data analysis, the bulk aerodynamic method is often used to calculate the turbulent surface fluxes, for which the aerodynamic roughness length (z ₀) is a key parameter. We present, for the first time, spatial and temporal variations of z ₀ in the ablation area of the Greenland ice sheet using year-round data from three automatic weather stations and one eddy-correlation mast. The temporal variation of z ₀ is found to be very high in the lower ablation area (factor 500) with, at the end of the summer melt, a maximum in spatial variation for the whole ablation area of a factor 1000. The variation in time matches the onset of the accumulation and ablation season as recovered by sonic height rangers. During winter, snow accumulation and redistribution by snow drift lead to a uniform value of z ₀≈ 10⁻⁴ m throughout the ablation area. At the beginning of summer, snow melt uncovers ice hummocks and z ₀ quickly increases well above 10⁻² m in the lower ablation area. At the end of summer melt, hummocky ice dominates the surface with z ₀ > 5  ×  10⁻³ m up to 60 km from the ice edge. At the same time, the area close to the equilibrium line (about 90 km from the ice edge) remains very smooth with z ₀ = 10⁻⁵ m. At the beginning of winter, we observed that single snow events have the potential to lower z ₀ for a very rough ice surface by a factor of 20 to 50. The total surface drag of the abundant small-scale ice hummocks apparently dominates over the less frequent large domes and deep gullies. The latter results are verified by studying the individual drag contributions of hummocks and domes with a drag partition model.     

New radiocarbon dates from Finnish mammoths indicating large ice-free areas in Fennoscandia during the Middle Weichselian

New radiocarbon dates from Finnish subfossil mammoth material (Mammuthus sp.), transported by glacial ice, range in age from ca. 32000 to ca. 22500 yr BP. These results suggest that there was a larger ice-free area in Fennoscandia during the Middle Weichselian than previously assumed. In addition, two dates are also presented for bones found in clay with a different transport history. Copyright © 1999 John Wiley & Sons, Ltd.