50a来洮河流域降水径流变化趋势分析

洮河流域 40多年水文实测资料分析表明 ,由于受气候变化及人类活动影响 ,流域降水和径流特征发生了明显变化 ,降水与径流总体呈下降趋势 ,其下降的线性斜率分别为 - 0 .86～ - 1.34mm·a-1和 - 1.5 7～ - 3.36m3·s-1·a-1;而气温呈缓慢上升趋势 ,其上升的线性斜率为 0 0 2℃·a-1.降水的减少和温度的升高已经导致甘南草原荒漠化 ,使许多湿地和湖泊干涸 ;径流的减少和温度增加在近2 0a来有进一步加剧的趋势 .     

测井资料交会图法在火山岩岩性识别中的应用

在火山岩储层研究中，岩性识别显得越来越重要。在评述目前常用的岩性识别方法后，重点以测井资料交会图法为例，以松辽盆地徐家围子断陷升平气田深层白垩系营城组火山岩为对象，优选出密度测井、自然伽玛测井、声波测井、电阻率、钍铀等测井项目的数据进行交会，编制出测井曲线交会图版，并以此为依据识别出该区的火山岩主要岩性有：安山岩、玄武岩、流纹岩和凝灰岩等。识别结果与实际情况相吻合。     

巴彦浩特盆地火成岩的综合地球物理解释

采用综合地球物理方法识别巴彦浩特盆地火成岩,首先利用高精度重磁资料和大地电磁测深资料,初步确定火成岩的平面位置和深度,然后利用钻遇火成岩的已知测井资料,建立人工合成地震记录,在地震剖面上标定出火成岩并分析其波组特征,采用BP神经网络进行火成岩的精细识别.研究表明,综合地球物理解释是提高反演解释精度的有效途径.     

Flexural subsidence by 29 Ma on the NE edge of Tibet from the magnetostratigraphy of Linxia Basin, China

This study provides a detailed magnetostratigraphic record of subsidence in the Linxia Basin, documenting a 27 Myr long sedimentary record from the northeastern edge of the Tibetan Plateau. Deposition in the Linxia Basin began at 29 Ma and continued nearly uninterruptedly until 1.7 Ma. Increasing rates of subsidence between 29 and 6 Ma in the Linxia Basin suggest deposition in the foredeep portion of a flexural basin and constrain the timing of shortening in the northeastern margin of the plateau to Late Oligocene–Late Miocene time. By Late Miocene–Early Pliocene time, a decrease in subsidence rates in the Linxia Basin associated with thrust faulting and a 10° clockwise rotation in the basin indicates that the deformation front of the Tibetan plateau had propagated into the currently deforming region northeast of the plateau.     

中国油气储层地质研究面临的挑战和发展方向

论述了我国采取“稳定东部 ,发展西部”的油气战略后 ,油气地质所面临的形势 ,以及油气工业的发展对储层地质提出四个领域的挑战 :深部储层、挤压盆地储层、低渗透储层和碳酸盐岩储层 ;这些都是石油勘探开发中久攻不克的难题。根据我国陆上东西部油气区的勘探开发实际和近年的储层研究实践 ,文章系统多视角地分析了这四个难题 ,并提出了相应客观的研究思路和研究方向。     

Fluid flow and mineralization of Youjiang Basin in the Yunnan-Guizhou-Guangxi area, China

Comprehensive studies, based on isotope geochemistry of C, H, O, S and Sr, chronology, common element and trace element geochemistry of fluid inclusions for the epithermal Au, As, Sb and Hg deposits in the Youjiang Basin and its peripheral areas, suggested that the ore fluid was the basin fluid with abundant metallic elements and the large-scale fluid flow of the same source in the late Yenshan stage was responsible for huge epithermal mineralization and silicification. The ore fluid flowed from the basin to the platform between the basin and the platform and migrated from the inter-platform basin to the isolated platform in the Youjiang Basin. The synsedimentary faults and paleokast surface acted respectively as main conduits for vertical and lateral fluid flow.     

Sedimentary facies during early stages of flooding in an extensional basin: the Brèche Rouge de Carboneras (Late Miocene, Almería/SE Spain)

The intramontane basins of the Betic Cordilleras (SE Spain) formed subsequent to the main phase of orogenic deformation during the middle Miocene in a close genetic relation to the Trans-Alboran Shear zone. Left lateral movements along a local branch (Carboneras fault zone, CF; strike NE–SW) of this zone played a major role in controlling the formation and dynamics of the Nijar-Carboneras Basin. To the south of the fault, a major phase of strike-slip faulting is recorded during the late Tortonian. The expression of this event is the Brèche Rouge de Carboneras (BRC), which seals a deep denudational surface on top of dislocated fault blocks formed by volcanics of the Cabo de Gata complex and early Tortonian shallow marine calcarenite. The sedimentary facies of this widely distributed unit in the Carboneras-Subbasin mirror the submarine topography and the distribution of the fault zones. Along strike-slip fault zones, autoclastic breccias and neptunian dikes preferentially oriented NW–SE and NE–SW occur, which are interpreted to represent the near-surface expression of the faults. Red limestone forms the groundmass of the autoclastic breccia and infills of neptunian dikes, which exhibit multiple phases of opening of fissures, gravitational sedimentary infill, lithification, and renewed creation of cracks. Steep relief, probably along fault scarps, was mantled by epiclastic volcanic conglomerate with a red carbonate matrix. Well-lithified coarse skeletal limestone rich in planktonic foraminifera formed pavements along sediment starved rocky surfaces in deep water. Laterally, within topographic depressions, the pavement limestone grades into thick accumulations of skeletal rudstone composed of fragmented azooxanthellate corals and stylasterid hydrozoans, which were concentrated by powerful bottom currents and gravitiy flows. Within the shallow water zone of dip slope ramps, cross-bedded calcarenite and calcirudite formed. Based on textures, fabrics and biota, rocks of the BRC were grouped into nine genetic lithofacies which document cryptic, deep-aphotic and shallow-photic environments typical of a sediment starved extensional basin.     

Provenance analysis and tectonic setting of the Ordovician clastic deposits in the southern Puna Basin, NW Argentina

Provenance studies on Early to Middle Ordovician clastic formations of the southern Puna basin in north-western Argentina indicate that the sedimentary detritus is generally composed of reworked crustal material. Tremadoc quartz-rich turbidites (Tolar Chico Formation, mean composition Q_t89 F7 L4) are followed by volcaniclastic rocks and greywackes (Tolillar Formation, mean Q_t33 F42 L25). These are in turn overlain by volcaniclastic deposits (mean Q_t24 F30 L46) of the Diablo Formation (late Arenig–early Llanvirn) that are intercalated by lava flows. All units were deformed in the Oclóyic Orogeny during the Middle and Late Ordovician. Sandstones of the Tolar Chico Formation are characterized by Th/Sc ratios > 1, La/Sc ratios ≈ 10, whereas associated fine-grained wackes show slightly lower values for both ratios. LREE (light rare earth elements) enrichment of the arenites is ≈ 50× chondrite, Eu/Eu* values are between 0·72 and 0·92, and flat HREE (heavy rare earth elements) patterns indicate a derivation from mostly felsic rocks of typical upper crustal composition. The ε_{Nd(t = sed)} values scatter around −11 to −9. The calculated Nd-T_DM residence ages vary between 1·8 and 2·0 Ga indicating contribution by a Palaeoproterozoic crustal component. The Th/Sc and La/Sc ratios of the Tolillar Formation are lower than those of the Tolar Chico Formation. Normalized REE (rare earth elements) patterns display a similar shape to PAAS (post-Archaean average Australian shale) but with higher abundances of HREEs. Eu/Eu* values range between 0·44 and 1·17, where the higher values reflect the abundance of plagioclase and feldspar-bearing volcanic lithoclasts. Average ε_{Nd(t = sed)} values are less negative at −5·1, and Nd-T_DM are lower at 1·6 Ga. This is consistent with characteristics of regional rocks of upper continental crust composition, which most probably represent the sources of the studied detritus. The rocks of the Diablo Formation have the lowest Th/Sc and La/Sc ratios, lower LREE abundances than the average continental crust and are slightly enriched in HREEs. Eu/Eu* values are between 0·63 and 1·17. The Nd isotopes (ε_{Nd(t = sed)} = −3 to −1; T_DM = 1·2 Ga) indicate that one source component was less fractionated than both the underlying Early Ordovician and the overlying Middle Ordovician units. Synsedimentary vulcanites in the Diablo Formation show the same isotopic composition. Our data indicate that the sedimentary detritus is generally composed of reworked crustal material, but that the Diablo Formation appears to contain ≈ 80% of a less fractionated component, derived from a contemporaneous continental volcanic arc. There are no data indicating an exotic detrital source or the accretion of an exotic block at this part of the Gondwana margin during the Ordovician.     

Regional Fault Systems of Qaidam Basin and Adjacent Orogenic Belts

The purpose of this paper is to analyze the regional fault systems of Qaidam basin and ad-jacent orogenic belts. Field investigation and seismic interpretation indicate that five regional fault sys-tans occurred in the Qaidam and adjacent nment.qin belts, controlling the development and evolution of the Qaidam basin. These fault systems are: (1)north Qaidam-Qilian Mountain fault system; (2) south Qaidam-East Kunhm Mountain fault system;（3）Altun strike-slip fault system; (4) Elashan strike-slip fault system, and (5) Gansen-Xiaochaidan fault system. It is indicated that the fault systems controlled the orientation of the Qaidam basin, the formation and distribution of secondary faults within the basin,the migration of depocenters and the distribution of hydrocarbon accmnulation belt.     

火山空降碎屑灾害预测软件包的研制

简述了火山空降碎屑灾害的危害性 ,指出研制火山空降碎屑灾害预测软件包的实际意义。介绍了软件的主要结构框图、软件设计的基本思路和结构设计时的几点考虑。介绍了在VisualBasic6 .0平台下 ,碎屑粒径参数、岩浆黏度、结晶压力、喷出压力、给定时间段和特定区域的各高度层风参数、岩浆动力学参数、喷出物总量、抛射体分布、坍塌阶段碎屑分布和扩散阶段碎屑分布计算等各程序的主要结构及主要功能。介绍了在Mapinfor 6 .0平台下软件的主要功能。给出了实现该软件包各项功能的理论基础和科学依据 ,并展示了 1980年 5月 18日美国圣海伦斯火山喷发的空降碎屑分布计算的实例 ,同时把计算结果与实际观测数据进行了对比 ,从而使模型的改进工作和软件的正确性得到了验证。最后 ,对软件存在的缺陷和需要进一步改进之处进行了细致的分析