全安盆地水文地质特征及热水成因分析

在简要分析全安盆地水文地质特征、地下水赋存条件及划分地下水类型基础上,对盆地西部周地—暖水塘地区地下热水形成原因、赋存环境进行研究,认为多期次构造运动形成的断裂、裂隙沟通深部地下热水是盆地热水来源的主要原因;采取地下热水样品并开展氢氧稳定同位素、逸出气体、水化学成份测试,认为地下热水由大气降水补给,长期水动态观测结果也显示大气降水与地下热水关系较密切。     

陕北延安“7.3暴雨”诱发地质灾害主要类型与特征

2013年7月3日以来,陕西延安地区百年不遇的持续性强降雨,引发了大量的崩塌、滑坡、泥流地质灾害,造成严重的财产损失和人员伤亡。通过野外实地调查,对本次持续性强降雨诱发大范围地质灾害的主要类型和特征进行了较为系统的研究。研究表明,本次持续性强降雨引发的地质灾害共计8 000余处,灾害类型主要有崩塌、滑坡和泥流,分别以小规模黄土崩塌、浅表层黄土滑坡、坡面型黄土泥流为主,以及上述灾种链生转化形成的沟谷型泥流。在持续降雨条件下,多灾种转化而成的复合型灾害是造成人员伤亡和财产损失的主要类型。     

冀中坳陷霸县凹陷文安斜坡沙三段储层特征及有效储层控制因素

综合运用岩心观察、薄片鉴定、物性分析等技术方法,系统分析了文安斜坡沙三段储层岩石学特征、成岩作用特征及储集特征。研究表明,文安斜坡沙三段储层岩石类型以岩屑长石砂岩为主,杂基含量低,成分成熟度和结构成熟度中等;储集空间以原生孔隙为主,占总孔隙的72.81%,储集物性较差,属中低孔-低渗特低渗储层;储层主要经历了压实作用/早期碳酸盐胶结→长石、岩屑溶解/石英次生加大/高岭石充填→石英溶解/碳酸盐胶结→黄铁矿胶结。在有效储层物性下限计算的基础上,选取孔隙度差值作为参数,系统分析了有效储层控制因素。有效储层的形成主要受沉积微相、粒度、分选、成岩作用以及地层压力控制。水下分流河道和河口坝微相中碎屑颗粒越粗,分选越好,杂基含量越少,有效储层越发育;胶结作用对储层物性的控制较明显,是影响中深层储层物性的主要因素;溶蚀作用主要表现为长石等硅酸盐矿物的溶蚀,平均增孔量3.42%;早期地层超压抑制压实作用,保护孔隙,是有效储层发育的有利因素。     

Highly fractionated I-type granites in NE China (II): isotopic geochemistry and implications for crustal growth in the Phanerozoic

NE China is the easternmost part of the Central Asian Orogenic Belt (CAOB). The area is distinguished by widespread occurrence of Phanerozoic granitic rocks. In the companion paper (Part I), we established the Jurassic ages (184–137 Ma) for three granitic plutons: Xinhuatun, Lamashan and Yiershi. We also used geochemical data to argue that these rocks are highly fractionated I-type granites. In this paper, we present Sr–Nd–O isotope data of the three plutons and 32 additional samples to delineate the nature of their source, to determine the proportion of mantle to crustal components in the generation of the voluminous granitoids and to discuss crustal growth in the Phanerozoic.

Despite their difference in emplacement age, Sr–Nd isotopic analyses reveal that these Jurassic granites have common isotopic characteristics. They all have low initial ⁸⁷Sr/⁸⁶Sr ratios (0.7045±0.0015), positive _Nd(T) values (+1.3 to +2.8), and young Sm–Nd model ages (720–840 Ma). These characteristics are indicative of juvenile nature for these granites. Other Late Paleozoic to Mesozoic granites in this region also show the same features. Sr–Nd and oxygen isotopic data suggest that the magmatic evolution of the granites can be explained in terms of two-stage processes: (1) formation of parental magmas by melting of a relatively juvenile crust, which is probably a mixed lithology formed by pre-existing lower crust intruded or underplated by mantle-derived basaltic magma, and (2) extensive magmatic differentiation of the parental magmas in a slow cooling environment.

The widespread distribution of juvenile granitoids in NE China indicates a massive transfer of mantle material to the crust in a post-orogenic tectonic setting. Several recent studies have documented that juvenile granitoids of Paleozoic to Mesozoic ages are ubiquitous in the Central Asian Orogenic Belt, hence suggesting a significant growth of the continental crust in the Phanerozoic.     

Examples of convective fractionation in high‐temperature granites from the Lachlan Fold Belt

Igneous rocks derived from high‐temperature, crystal‐poor magmas of intermediate potassic composition are widespread in the central Lachlan Fold Belt, and have been assigned to the Boggy Plain Supersuite. These rocks range in composition from 45 to 78% SiO₂, with a marked paucity of examples in the range 65–70% SiO₂, the composition dominant in most other granites of the Lachlan Fold Belt. Evidence is presented from two units of the Boggy Plain Supersuite, the Boggy Plain zoned pluton and the Nallawa complex, to demonstrate that these high‐temperature magmas solidified under a regime of convective fractionation. By this process, a magma body solidified from margin to centre as the zone of solidification moved progressively inwards. High‐temperature near‐liquidus minerals with a certain proportion of trapped interstitial differentiated melt, separated from the buoyant differentiated melt during solidification. In most cases much of this differentiated melt buoyantly rose to the top of the magma chamber to form felsic sheets that overly the solidifying main magma chamber beneath. Some of these felsic tops erupted as volcanic rocks, but they mainly form extensive high‐level intrusive bodies, the largest being the granitic part of the Yeoval complex, with an area of over 200 km². Back‐mixing of fractionated melt into the main magma chamber progressively changed the composition of the main melt, resulting in highly zoned plutons. In the more felsic part of the Boggy Plain zoned pluton back‐mixing was dominant, if not exclusive, forming an intrusive body cryptically zoned from 63% SiO₂ on the margin to 72% SiO₂ in the core. It is suggested that tonalitic bodies do not generally crystallise through convective fractionation because the differentiated melt is volumetrically small and totally trapped within the interstitial space: back‐mixing is excluded and homogeneous plutons with essentially the composition of the parental melt are formed.     

Structure and metamorphism of the Calliope Volcanic Assemblage: Implications for middle to Late Devonian orogeny in the northern New England Fold Belt

The Late Silurian to Middle Devonian Calliope Volcanic Assemblage in the Rockhampton region is deformed into a set of northwest‐trending gently plunging folds with steep axial plane cleavage. Folds become tighter and cleavage intensifies towards the bounding Yarrol Fault to the east. These folds and associated cleavage also deformed Carboniferous and Permian rocks, and the age of this deformation is Middle to Late Permian (Hunter‐Bowen Orogeny). In the Stanage Bay area, both the Calliope Volcanic Assemblage and younger strata generally have one cleavage, although here it strikes north to northeast. This cleavage is also considered to be of Hunter‐Bowen age. Metamorphic grade in the Calliope Volcanic Assemblage ranges from prehnite‐pumpellyite to greenschist facies, with higher grades in the more strongly cleaved rocks. In the Rockhampton region the Calliope Volcanic Assemblage is part of a west‐vergent fold and thrust belt, the Yarrol Fault representing a major thrust within this system.

A Late Devonian unconformity followed minor folding of the Calliope Volcanic Assemblage, but no cleavage was formed. The unconformity does not represent a collision between an exotic island arc and continental Australia as previously suggested.     

The oldest Mo porphyry mineralization in the Yangtze Valley Metallogenic Belt of eastern China: Constraints on its origin from geochemistry,geochronology and fluid inclusion studies at Matou

The Matou Mo(-Cu) deposit, located in the Yangtze Valley Metallogenic Belt of central-eastern China, is a typical porphyry-type Mo deposit. The orebodies at the deposit are hosted by Matou porphyritic granodiorite, which is the largest intrusive in the area. Quartz vein-type and disseminated sulfide mineralization are well developed in the porphyry and near its contact with Silurian sandstone. Crosscutting relationships indicate that porphyritic granodiorite is the oldest phase in the pluton, which is crosscut by a porphyritic diorite containing traces of chalcopyrite, and later dolerite dykes. These phases have U-Pb zircon dates of 147 ± 3, 140 ± 1 and 135 ± 1 Ma, which confirms the cross-cutting relationships observed in the field. A Re-Os molybdenite isochron age of 147 ± 4 Ma indicates that the porphyritic granodiorite is the source of the oldest Mo mineralization in the metallogenic belt and was formed during a change of the tectonic setting in the area, from an intracontinental orogeny to extensional tectonics. From 147 to 135 Ma, crust-mantle interaction played an important role in the formation of magmatic rocks at Matou. Systematic petrological and geochemistry investigations reveal that the three phases have a crust source with minor input from the mantle. Investigation of ore-forming fluid, H-O isotopes, S isotopes, and the Re content of molybdenite indicate that the ore-forming fluid and metals were derived from the lower crust. During the evolution of fluid from initial magmatic fluids (stage I) to ore-forming fluids (stage II), fluid boiling accompanied by the input of relatively cooler meteoric water led to the deposition of the Mo mineralization.     

Geochronology and provenance of detrital zircons from late Palaeozoic strata of central Jilin Province,Northeast China: implications for the tectonic evolution of the eastern Central Asian Orogenic Belt

Here we present new U–Pb and Hf isotopic data for detrital zircons obtained from six samples of late Palaeozoic units from central Jilin Province, Northeast China, and use these data and sedimentary formations to constrain the late Palaeozoic tectonic evolution of the eastern segment of the southern margin of the Central Asian Orogenic Belt. The majority of the detrital zircons from the six samples are euhedral–subhedral and exhibit oscillatory zoning, indicating a magmatic origin. Zircons from sandstones in the Devonian Wangjiajie and Xiaosuihe formations yield seven main age populations (399, 440, 921, 1648, 1864, 1911, and 2066 Ma) and two minor age populations (384 and 432 Ma), respectively. Zircons from a quartz sandstone in the Carboniferous Luquantun Formation yield four age populations (~332, 363, 402, and 428 Ma), and zircons from quartz sandstones of the Permian Shoushangou, Fanjiatun, and Yangjiagou formations yield age populations of 265, 369, 463, 503, and 963 Ma; 264, 310, 337, 486, and 529 Ma; and 262, 282, 312, 338, 380, 465, and 492 Ma, respectively. These data, together with the ages of magmatic zircons from interbedded volcanics and biostratigraphic evidence, as well as analysis of formations, give rise to the following conclusions. (1) The Wangjiajie and Xiaosuihe formations were deposited in an extensional environment during Middle and Middle–Late Devonian time, respectively. The former was sourced mainly from ancient continental material of the North China Craton with minor contributions from newly accreted crust, while the latter was sourced mainly from newly accreted crust. (2) The Luquantun Formation formed in an extensional environment during early–late Carboniferous time from material sourced mainly from newly accreted crust. (3) The Shoushangou, Fanjiatun, and Yangjiagou formations formed during a period of rapid uplift in the late Permian, from material sourced mainly from newly accreted crust.     

“一带一路”地区能源金属矿床分布规律及开发工艺

对"一带一路"地区的能源金属锂和铀的矿床分布规律进行统计,并对典型矿床的地质特征与开发工艺进行概述,为了解"一带一路"地区的锂矿和铀矿提供基础信息,同时为中国进行"能源金属"的开采提供科学依据。研究认为,"一带一路"地区共有大型及以上锂矿36个,成因类型有硬岩型、盐湖型、沉积型和煤伴生型4种,资源储量分别为784×10~4t、1702×10~4t、237.5×10~4t和623×10~4t。盐湖型锂矿分布于中国和阿富汗,硬岩型锂矿分布在俄罗斯等国家,沉积型锂矿分布在塞尔维亚等国家,煤伴生型锂矿只分布于中国。鉴于盐湖型锂矿开发的环境影响较小,建议有关国家加大对盐湖型锂资源的勘探与开发。"一带一路"地区共有大型及以上铀矿130个,成因类型主要为砂岩型和火山岩型,主要集中在哈萨克斯坦等国家,铀资源储量(可靠回收成本≤130$/kg)达181.94×10~4t,占"一带一路"地区总资源储量的92.12%,建议中国与相关国家进行交流与合作,加大对中国境内北方地区砂岩型铀矿的寻找力度,同时进行火山岩型铀矿的勘探开发。     

Prediction of acid mine drainage generation potential in selected mines in the Ashanti Metallogenic Belt using static geochemical methods

Acid mine/rock drainage (AMD/ARD) is the biggest environmental threat facing the mining industry. This study investigates AMD/ARD possibilities in three mines in the Ashanti Belt, using acid base accounting (ABA) and net acid generation pH (NAGpH) tests. Twenty-eight samples of rock units and mine spoil from these mines were collected for ABA and NAGpH tests. Two tailing dumps at Prestea and Nsuta were confirmed by both methods as acid generating with NAGpH of 4.5 and 4.6 and neutralization potential ratio values of 4.38 and 4.60, respectively. Six other samples are classified as potentially acid generating using a variety of established classification criteria. The rest of the samples either exhibited very low sulphur and carbonate content or had excess carbonate over sulphur. Consistency between results from ABA and NAGpH tests validates these tests as adequate tools for preliminary evaluation of AMD/ARD possibilities in any mining project in the Ashanti Belt.