胶东昆嵛山花岗岩的特征、成因及其与金矿的关系

昆嵛山花岗岩是牟平—乳山金矿成矿带的围岩，在其成因和定位时代上长期存在争议。本文对岩体地质和地球化学特征进行了系统研究，并就岩体成因及其与金矿的关系进行了讨论。作者认为，昆嵛山花岗岩是在中生代由岩浆缓慢冷凝结晶形成的大型复式岩基，并非交代成因。它由垛崮顶片麻状花岗闪长岩（１４７Ｍａ）、八门邹家斑状花岗闪长岩（１３５Ｍａ）、瓦善—水道弱片麻状二长花岗岩及五爪山片麻状含榴二长花岗岩（１２０Ｍａ）组成，成分具贫铝富碱的特点。岩浆来源于中下地壳中酸性变质火山岩系部分熔融形成的岩浆，其形成温度为６５０—７５０℃。岩体经历了韧性和脆性变形作用，不同方向的片麻状构造是岩浆结晶期韧性变形作用的结果。脆性变形形成的断裂和破碎带是本区主要的导矿和容矿构造。花岗岩定位、韧和脆性变形作用与金矿成矿作用有十分密切的关系     

Important Geological Factors Controlling the Formation of Gold Deposits in East China

The major gold deposits in east China are characterized by their occurrence in pre-Cambrian host metamorphic rocks,restriction in some specific stratigraphic-structural terranes,tendentious localization in ductile or ductile-brittle shear zones,association with the syntexis type granitoids,and significant remobilization,superimposition and enrichment by the later stage Mesozoic tectono-magmatic activities.     

Sediment—Hosted Gold Deposits in China_geochemistry and Prospecting

Sediment-hosted gold deposits are the major type of gold resources in china,Concen trated mostly in the two“Triangle Regios“,they are generally hosted in fine-clastic turbidite,hydrothermal chet and marl ranging from cambrian to Triassic in age,structurally controlled by domes,anticlines and second-ordered faults.They are similar to the Carlin-type gold deposits in mineral assemblage and geochemical marks,with an element association closely comparable to those of modern springs and submarine hydrothermal sediments.Organic matter may have played an important role in mineralization .The ore solution may be hydrothermally altered meteoric water developed i areas of local geothermal anomaly.     

Upper Mississippi embayment shallow seismic velocities measured in situ

Vertical seismic compressional- and shear-wave (P-and S-wave) profiles were collected from three shallow boreholes in sediment of the upper Mississippi embayment. The site of the 60-m hole at Shelby Forest, Tennessee, is on bluffs forming the eastern edge of the Mississippi alluvial plain. The bluffs are composed of Pleistocene loess, Pliocene-Pleistocene alluvial clay and sand deposits, and Tertiary deltaic-marine sediment. The 36-m hole at Marked Tree, Arkansas, and the 27-m hole at Risco, Missouri, are in Holocene Mississippi river floodplain sand, silt, and gravel deposits. At each site, impulsive P- and S-waves were generated by man-made sources at the surface while a three-component geophone was locked downhole at 0.91-m intervals.

Consistent with their very similar geology, the two floodplain locations have nearly identical S-wave velocity (V_S) profiles. The lowest V_S values are about 130 m s⁻¹, and the highest values are about 300 m s⁻¹ at these sites. The shear-wave velocity profile at Shelby Forest is very similar within the Pleistocene loess (12 m thick); in deeper, older material, V_S exceeds 400 m s⁻¹.

At Marked Tree, and at Risco, the compressional-wave velocity (V_P) values above the water table are as low as about 230 m s⁻¹, and rise to about 1.9 km s⁻¹ below the water table. At Shelby Forest, V_P values in the unsaturated loess are as low as 302 m s⁻¹. V_P values below the water table are about 1.8 km s⁻¹. For the two floodplain sites, the V_P/V_S ratio increases rapidly across the water table depth. For the Shelby Forest site, the largest increase in the V_P/V_S ratio occurs at 20-m depth, the boundary between the Pliocene-Pleistocene clay and sand deposits and the Eocene shallow-marine clay and silt deposits.

Until recently, seismic velocity data for the embayment basin came from eartquake studies, crustal-scale seismic refraction and reflection profiles, sonic logs, and from analysis of dispersed earthquake surface waves. Since 1991, seismic data for shallow sediment obtained from reflection, refraction, crosshole and downhole techniques have been obtained for sites at the northern end of the embayment basin. The present borehole data, however, are measured from sites representative of large areas in the Mississippi embayment. Therefore, they fill a gap in information needed for modeling the response of the embayment to destructive seismic shaking.     

硬质合金复合片齿钎具

运用力学原理研制成功了复合片齿钎头和复合片齿整钎，并批量投入市场。该系列钎具凿岩速度、寿命和硬质合金片齿有效利用率均显著优于片状和球齿钎具。     

江西永平铜矿金属矿物化学成份及矿物包体特征

永平铜矿黄铁矿、黄铜矿的化学成份特征以及矿物测温和石英包体成份分析特征表明成矿经历了一个较低温度阶段，但所反映的后期成矿作用的改造特征也非常明显，特征是闪锌矿，其化学成份具明显的后期改造成矿特征，是岩浆热作用的产物。黄铁矿的同生成矿较为明显，闪锌矿的后期改造成矿特征更为明显，而黄铜矿具有明显的沉积改造特征。     

蚀变带元素地球化学成矿预测法──以金龙山微细浸染型金矿为例

金矿化作用伴围岩蚀变，且多受断裂控制，反映在地球化学上出现某些元素的异常。在已发现一害矿化体并掌握一般控制矿特征的地区，利用已有工程在蚀变带内连续捡块采样，分析有关批示元素，总结有关的地球化学指标，建立地球化学预测模式，对已知矿体及外围异常进行了地球化学评价。     

太白维山大型银矿床地质地球化学特征

太白维山大型银矿床为典型的中低温火山－次火山隐爆角砾岩型矿床，受岩性和断裂构造控制明显，矿体的产出部位和矿石品级与隐爆角砾岩关系密切。本文通过对基岩和１：２０万水系沉积物资料的分析与处理，得出基岩中主成矿元素组合为Ａｇ－Ｃｕ－Ｐｂ－Ａｓ－Ｓｂ－Ｚｎ，水系沉积物中主成矿元素组合为Ａｇ－Ｐｂ－Ｚｎ－Ｃｄ－Ｍｎ－Ｈｇ的结论，同时指出Ｐｂ可作为此矿床最重要的间接指示元素，而主成矿元素中各单元素异常浓集中心对银矿床的产出部位有很好的指示作用，为找矿的重要指标。     

460铀矿床成矿构造背景

４６０矿床为一个大型斑岩型铀－钼矿床。晚侏罗世近东西向分布的火山岩系为铀元素的预富集打下了基础。白垩纪流纹斑岩为其主要的成矿母岩，可能为ＮＥ向展布。早第三纪末期的热液活动使铀进一步富集成矿，在区域应力场作用下，矿体呈ＮＷ走向。晚第三纪的表生淋积作用，使矿体上部近地表处形成次生富集带。基于上述研究，可以进一步明确此类矿床的找矿方向。     

东胜煤系高岭土矿床地质特征及开发利用前景

东胜煤系砂岩型高岭土矿床是特大型沉积矿床，矿床地质条件简单，开采条件优越，矿石分３种类型，以砂岩型为主体，原矿组成简单，质量优良，尾矿以石英为主，是一种质量优良的玻璃原普，可综合利用，该高岭土的开发可与煤炭同步进行，具有投资少，见效快的特征，开发前景广阔。