不同浓度Li2SO4水溶液结构的X射线衍射研究

用θ～ 2θ型粉末衍射仪反射法精确测量了不同浓度的Li2 SO4水溶液的衍射数据 ,通过数据处理给出了溶液的结构函数和径向分布函数 ,由几何结构模型的最小二乘法精修 ,得到了溶液中阳离子和阴离子第一、二水合层的结构参数。     

Improvement of photorefractive properties in Hf:Fe:LiNbO3 crystals with various [Li]/[Nb] ratios

Photorefractive properties of Hf:Fe:LiNbO₃ crystals with various [Li]/[Nb] ratios have been investigated at 488 nm wavelength based on the two-wave coupling experiment. High diffraction efficiency and large recording sensitivity are observed and explained. The decrease in Li vacancies is suggested to be the main contributor to the increase in the photoconductivity and subsequently to the induction of the improvement of recording sensitivity. The saturation diffraction efficiency is measured up to 80.2%, and simultaneously the recording sensitivity of 0.91 cm/J is achieved to in the Hf:Fe:LiNbO₃ crystal grown from the melt with the [Li]/[Nb] ratio of 1.20, which is significantly enhanced as compared with those of the Hf:Fe:LiNbO₃ crystal with the [Li]/[Nb] ratio of 0.94 in melt under the same experimental conditions. Experimental results definitely show that increasing the [Li]/[Nb] ratio in crystal is an effective method for Hf:Fe:LiNbO₃ crystal to improve its photorefractive properties.     

累托石的结晶度研究

本文用峰形分析法分析累托石的001X射线衍射峰特征;用001峰的半峰宽(W)测定累托石的结晶度(G),并令G=K/W=1为最大结晶度。文中测定了5个矿区10件累托石样品的结晶度,详细描述了不同结晶度累托石的X射线衍射、红外谱及差热曲线特征,讨论了研磨、热处理和改型对结晶度的影响,并阐明累托石的结晶度与造浆率之间呈正相关性。     

The interplay and effects of deformation and crystallized melt on the rheology of the lower continental crust,Fiordland, New Zealand

Microstructural, electron backscatter diffraction (EBSD), and misorientation analyses of a migmatitic granulite-facies orthogneiss from the exhumed lower crust of a Cretaceous continental arc in Fiordland, New Zealand show how deformation was accommodated during and after episodes of melt infiltration and high-grade metamorphism. Microstructures in garnet, omphacite, plagioclase, and K-feldspar suggest that an early stage of deformation was achieved by dislocation creep of omphacite and plagioclase, with subsequent deformation becoming partitioned into plagioclase. Continued deformation after melt infiltration resulted in strain localization in the leucosome of the migmatite, where a change of plagioclase deformation mechanism promoted the onset of grain boundary sliding, most likely accommodated by diffusion creep, in fine recrystallized plagioclase grains. Our results suggest three distinctive transitions in the rheology of the lower crust of this continental arc, where initial weakening was primarily achieved by deformation of both omphacite and plagioclase. Subsequent strain localization in plagioclase of the leucosome indicates that the zones of former melt are weaker than the restite, and that changes in deformation mechanisms within plagioclase, and an evolution of its strength, primarily control the rheology of the lower crust during and after episodes of melting and magma addition.     

Temperature evolution between 50 K and 320 K of the thermal expansion tensor of gypsum derived from neutron powder diffraction data

The unit cell parameters, extracted from Rietveld analysis of neutron powder diffraction data collected between 4.2 K and 320 K, have been used to calculate the temperature evolution of the thermal expansion tensor for gypsum for 50 ≤ T ≤ 320 K. At 300 K the magnitudes of the principal axes are α ₁₁  = 1.2(6) × 10⁻⁶ K⁻¹, α ₂₂  = 36.82(1) × 10⁻⁶ K⁻¹ and α ₃₃  = 25.1(5) × 10⁻⁶ K⁻¹. The maximum axis, α ₂₂ , is parallel to b, and using Institution of Radio Engineers (IRE) convention for the tensor orthonormal basis, the axes α ₁₁ and α ₃₃ have directions equal to (−0.979, 0, 0.201) and (0.201, 0, 0.979) respectively. The orientation and temperature dependent behaviour of the thermal expansion tensor is related to the crystal structure in the I2/a setting. Received 12 February 1998 / Revised, accepted 19 October 1998     

微量相X射线衍射定量分析的一种简便方法

阐述了关于微量相X射线衍射定量分析的一种简便方法———近似线性关系法,它适用于二相体系(或基体吸收系数基本恒定的多相体系)材料中微量相的定量分析。该方法不需要在待测样品中加入参考物相,分析时仅需对一条衍射线进行测定,因而分析时间很短,其测定结果与实际含量的相对误差为-10.2%～ 21.4%,与外标法和内标法的测量结果的精度相当。     

The C1XS X-ray Spectrometer on Chandrayaan-1

The Chandrayaan-1 X-ray Spectrometer (C1XS) is a compact X-ray spectrometer for the Indian Space Research Organisation (ISRO) Chandrayaan-1 lunar mission. It exploits heritage from the D-CIXS instrument on ESA's SMART-1 mission. As a result of detailed developments to all aspects of the design, its performance as measured in the laboratory greatly surpasses that of D-CIXS. In comparison with SMART-1, Chandrayaan-1 is a science-oriented rather than a technology mission, leading to far more favourable conditions for science measurements. C1XS is designed to measure absolute and relative abundances of major rock-forming elements (principally Mg, Al, Si, Ca and Fe) in the lunar crust with spatial resolution ?25 FWHM km, and to achieve relative elemental abundances of better than 10%.     

阿尔金北缘岩石变形机制——来自X光组构分析的证据

对阿尔金北缘地区变形蚀变花岗岩、花岗质糜棱岩、变形酸性火山岩和变形英安质凝灰岩中石英和绢云母2种矿物进行X光岩石组构分析,认为本区岩石变形比较明显,宏观面理近于东西向展布,绢云母变形较强,平行于面理定向排列;而石英以底面或近底面滑移为主,部分样品兼有柱面Ⅰ型滑移和柱面Ⅱ型滑移,反映本区岩石变形机制为中浅层次的脆-韧性变形(10~15km、250~350℃、0.25~0.40GPa)。通过岩石组构特征与宏观面理产状,推断本区韧性变形以右行运动为主,与板块碰撞在阿尔金北缘大平沟地区产生的韧性变形带特征一致。     

Design of a high update-rate star sensor for arcsec-level attitude determination from balloon-borne X/γ astronomy platforms

This paper describes the design of a star sensor based upon a high dynamic range CCD in order to reach an arcsec-level attitude determination in balloon-borne missions. A custom star identification software was developed and laboratory-tested on a prototype assembled using commercial components. A set of numerical simulations have been carried out to study the dependence on the pointing precision of the centroid position accuracy, the number of detected stars and the effect of the image focusing. Moreover, the role of the electronic noise and the discrete pixel structure on the light signals is identified by the analysis of numerical simulations. Laboratory tests confirm that the arcsec pointing accuracy with a 1 Hz update rate can be achieved with our combination of custom-developed software and selected hardware components.     

The effect of an interface boundary layer on the resonance properties of a buried structure

This paper presents a model for the analysis of the diffraction of plane waves at a cavity in an infinite homogeneous linear elastic medium supported by a segmented lining. An elastic boundary layer is introduced between the cavity lining and the infinite medium. The boundary layer is simulated by ‘elastic boundary conditions’ in which the stress is proportional to the relative displacement of the lining and of the surrounding medium boundary. A closed‐form analytical solution of the problem was obtained using the Fourier–Bessel series, the convergence of which was proven. It was shown that the number of series terms required to obtain a desired level of accuracy can be determined in advance. Using amplitude–frequency response analysis it was shown that the boundary layer produces additional ‘pseudo‐resonance’ frequencies that depend on the layer properties. These frequencies are almost identical to the eigenvalues obtained from the simple analysis of a segmented elastically supported lining. Copyright © 2003 John Wiley & Sons, Ltd.