桂西岩溶堆积型铝土矿床成矿作用及控矿因素

桂西岩溶堆积型铝土矿赋存于岩溶洼地中的红土层中，具有矿床规模大、矿石质量优的特点。成矿物质来源于上二叠统底部的古风化壳型铝土矿层，成矿时代为早更新世，矿床成因与岩溶作用、红土化作用有关。成矿受矿源层、地层岩性、气候、构造、地貌等因素控制。     

中国西部地质灾害空间数据库系统建设

中国西部地质灾害空间数据库系统，采集了大量的西部地质灾害数据，利用GIS强大的空间数据管理功能对地质灾害数据进行管理，建成具有强大的属性查询统计、空间检索、空间分析功能的空间数据库系统。本文就建立这一数据库系统的设计思路、系统的组成和功能模块方面进行了阐述。     

鞍山市西郊区水位预测

根据鞍山市西郊区水文地质条件，建立了双层渗流二维平面系统的数学模型：应用Galerkin有限元法求解模型，从模型的计算结果可见该区观测点水位绝对误差较小，达到了规范要求的计算精度，同时，在此区内有一个大漏斗，在东南的铁西一带也有一个小漏斗。由于铁西一带是主要开采水源区，开采水量较大，所以漏斗逐渐向外扩大且水位有明显下降的趋势。这一变化规律与实际水位一致，说明计算水位基本上反映了实际水位空间变化的规律。因此根据模拟参数利用此模型对该地区进行了水位预测，共预测了四年的水位状况，并依据水位的预测结果对该区的水资源开发利用提出了合理建议。     

A critical state interpretation for the cyclic liquefaction resistance of silty sands

Contrary to many laboratory investigations, common empirical correlations from in situ tests consider that the increase in the percentage of fines leads to an increase of the cyclic liquefaction resistance of sands. This paper draws upon the integrated Critical State Soil Mechanics framework in order to study this seemingly not univocal effect. Firstly the effect of fines on the Critical State Line (CSL) is studied through a statistical analysis of a large data set of published monotonic triaxial tests. The results show that increasing the content of non-plastic fines practically leads to a clockwise rotation of the CSL in (e–ln p) space. The implication of this effect on cyclic liquefaction resistance is subsequently evaluated with the aid of a properly calibrated critical state elasto-plastic constitutive model, as well as a large number of published experimental results and in situ empirical correlations. Both sets of data show clearly that a fines content, less than about 30% by weight, may prove beneficial at relatively small effective stresses (p₀<50–70 kPa), such as the in situ stresses prevailing in most liquefaction case studies, and detrimental at larger confining stresses, i.e. the stresses usually considered in laboratory tests. To the extent of these findings, a correction factor is proposed for the practical evaluation of liquefaction resistance in terms of the fines content and the mean effective confining stress.     

Absence of Archean basement in the South Kunlun Block: Nd-Sr-O isotopic evidence from granitoids

Abstract   The West Kunlun mountain range along the northwestern margin of the Tibetan Plateau is crucial in understanding the early tectonic history of the region. It can be divided into the North and South Kunlun Blocks, of which the former is considered to be part of the Tarim Craton, whereas consensus was not reached on the nature and origin of the South Kunlun Block. Samples were collected from the 471 Ma Yirba Pluton, the 405 Ma North Kudi Pluton and the 214 Ma Arkarz Shan Intrusive Complex. These granitoids cover approximately 60% of the Kudi area in the South Kunlun Block. Sr, Nd, and O isotope compositions preclude significant involvement of mantle-derived magma in the genesis of these granitoids; therefore, they can be used to decipher the nature of lower–mid crust in the area. All samples give Mesoproterozoic Nd model ages (1.1–1.5 Ga) similar to those of the exposed metamorphic complex of this block but significantly different from those of the basement of the North Kunlun Block (2.8 Ga). This indicates that the South Kunlun Block does not have an Archean basement, and, thus, does not support the microcontinent model that suggests the South Kunlun Block was a microcontinent once separated from and later collided back with the North Kunlun Block.     

南沙海域第三纪生物礁层序构成和演化

南沙海域第三纪盆地生物礁油气藏勘探具有巨大的潜力。作者运用层序地层学原理精细解剖不同体系域的生物礁内部构成,建立了高精度的生物礁礁层序地层格架,并逐层进行回剥分析,表明第三系充填沉积为四幕伸展裂陷过程,进而揭示盆地生物礁层序的动态发育过程及不同时期南沙海域含油气盆地的发育状态。     

An experimental study on the shallow-level migmatization of ferrogabbros from the Fuerteventura Basal Complex, Canary Islands

Spectacular shallow-level migmatization of ferrogabbroic rocks occurs in a metamorphic contact aureole of a gabbroic pluton of the Tierra Mala massif (TM) on Fuerteventura (Canary Islands). In order to improve our knowledge of the low pressure melting behavior of gabbroic rocks and to constrain the conditions of migmatization of the TM gabbros, we performed partial melting experiments on a natural ferrogabbro, which is assumed as protolith of the migmatites. The experiments were performed in an internally heated pressure vessel (IHPV) at 200 MPa, 930–1150 °C at relatively oxidizing conditions. Distinct amounts of water were added to the charge.

From 930 to 1000 °C, the observed experimental phases are plagioclase (An_60–70), clinopyroxene, amphibole (titanian magnesiohastingsites), two Fe–Ti oxides, and a basaltic, K-poor melt. Above 1000 °C, amphibole is no longer stable. The first melts are very rich in normative plagioclase (>70 wt.%). This indicates that at the beginning of partial melting plagioclase is the major phase which is consumed to produce melt. In the experiments, plagioclase is stable up to high temperatures (1060 °C) showing increasing An content with temperature. This is not compatible with the natural migmatites, in which An-rich plagioclase is absent in the melanosomes, while amphibole is stable. Our results show that the partial melting of the natural rocks cannot be regarded as an “in-situ” process that occurred in a closed system. Considerable amounts of alkalis probably transported by water-rich fluids, derived from the mafic pluton underplating the TM gabbro, were necessary to drive the melting reaction out of the stability range of plagioclase. A partial melting experiment with a migmatite gabbro showing typical “in-situ” textures as starting material supports this assumption.

Crystallization experiments performed at 1000 °C on a glass of the fused ferrogabbro with different water contents added to the charge show that generally high water activities could be achieved (crystallization of amphibole), independently of the bulk water content, even in a system with very low initial bulk water content (0.3 wt.%). Increasing water contents produce plagioclase richer in An, reduces the modal proportion of plagioclase in the crystallizing assemblage and extends the melt fraction. High melt fractions of >30 wt.% could only be observed in systems with high bulk water contents (>2 wt.%). This indicates that the migmatites were generated under water-rich conditions (probably water-saturated), since those migmatites, which are characterized as “in-situ” formations, show generally high amounts of leucosomes (>30 wt.%).     

Caledonian Low-Temperature Granulite-Facies Metamorphism in the West Kunlun Orogenic Belt—SHRIMP Chronological Evidence from Zircon

The West Kunlun orogenic belt is located at the conjunction of the paleo-Asian tectonic system and the Tethys tectonic system. Petrological and mineralogical studies of the Early Cambrian metamorphic surface crust in this region have shown that in case the metamorphism reached low-temperature granulate facies, the typical mineral assemblage is biotite-garnet-silimanite-K feldspar-plagioclase-quartz. The peak metamorphic temperatures are within the range of 720–740°C and the pressure is 0.6 GPa ±. Three types of metamorphic zircon have been detected in the metamorphic rocks: the complex inclusion-bearing type ; the early relic zircon inclusion-bearing type; and the inclusion-free type. SHRIMP age determination of these three types of metamorphic zircon have revealed that these zircons were formed principally during 400–460 Ma, indicating that pre-Cambrian metamorphic surface crust rocks underwent low-temperature granulite facies metamorphism during the Caledonian. In combination with the geological characteristics of this region, it is considered that when the oceanic basin was closed, there occurred intense intracontinental subduction (type A), bringing part of the Early Cambrian metamorphic basement in this region downwards to the lower crust. Meanwhile, there were accompanied with tectonic deformation at deep levels and medium- to high-grade metamorphism. This study provided important chronological and mineralogical evidence for the exploration of the evolutionary mechanism and process of the West Kunlun Early Paleozoic. Part of the results from the research project “ Research on the West Kunlun pre-Cambrian tectonic events” under the program “ Research on the important geological problems of China’ s pre-Cambrian” (No. 200113900070) sponsored by the China National Geological Surveying Bureau.     

Possible refugia for reefs in times of environmental stress

This paper investigates the refuge potential of (1) upwelling areas, (2) coral areas at medium depth, and (3) offshore bank and island reefs in a scenario of increased global warming, and thus increased sea surface temperature (SST) and increased solar UV radiation. (1) Observations on coral health and water temperature in the subtropical Atlantic (Eleuthera and Cat Island, Bahamas) and Indian Ocean (Sodwana Bay, South Africa) suggest a link between cool water delivered by upwelling and coral health. After the 1998 bleaching event, caused by strong SST anomalies, coral health and recovery from the previous year's bleaching was significantly better on the narrow southern Cat Island shelf (70% of corals healthy) where the presence of cold water was observed, which was attributed to small-scale upwelling, than on the wide northern Eleuthera shelf (44% of corals healthy), where downwelling of hot bank waters was believed to have damaged corals. In South Africa, regular, short-term upwelling events in five summers reduced SST to well below bleaching level. (2) In the northern Red Sea (Safaga Bay) and in South Africa (Sodwana Bay), wide areas with either coral frameworks or non-framework communities exist. Calculations show that if the top 10 m (20 m) of the ocean became inhospitable to corals, still 50.4% (17.5%) of the coral area would remain intact in the Red Sea and 99% (40%) in South Africa. (3) Offshore bank and island reefs investigated in the Turks, Caicos, and Mouchoir Banks and Grand and Little Cayman showed high rates of mortality and coral diseases. The most remote sites (Mouchoir Bank) were not the healthiest. Refuge areas appear to exist in (1) and (2), but in (3) only if vigorous water-circulation is encountered.     

Coal mining along the Warfield Fault, Mingo County, West Virginia: a tale of ups and downs

Mine development along a 15-mile (24 km) section of the Warfield Fault in Mingo County, West Virginia has broadened the geological understanding of the fault and its related structures. The fault has been exposed in two new road cuts, one in the northeast-trending segment at Neely Branch and one in the eastern east-trending segment at the head of Marrowbone Creek. Both exposures show a well-defined normal fault with a 45° to 55° N dip, juxtaposing sandstone/shale packages from the roof and the floor of the Coalburg seam. The fault is associated with a thin gouge zone, some drag folding, and parallel jointing. Its trace tends to run parallel to the crest of the adjacent Warfield Anticline. Based on underground mine development and detailed core drilling, the vertical offset along the fault plane ranges from a maximum of 240 ft (73 m) in the central part of the area near the structural bend to less than 100 ft (30 m) in western and eastern directions. The fault is located along the relatively steeply dipping (locally in excess of 25%) southern limb of the Warfield Anticline, and appears related to a late phase of extension involving folded Pennsylvanian strata. On a regional scale, the lithological variations across the fault do not suggest any appreciable strike-slip component.Underground room and pillar mines in the Coalburg seam north and south of the fault have been greatly impacted by the Warfield structures. Due to the combined (and opposite) effects of the folding and faulting, the northern mines are located up to 400 ft (125 m) higher in elevation than the southern ones. Overland conveyor belts connect mining blocks separated by the fault. The practical mining limit along the steep slopes toward the fault is around 15%. Subsidiary normal faults with offsets in the 5- to 15-ft (1.5–4.5 m) range are fairly common and form major roof control and production hurdles. Overall, the Warfield structures pose an extra challenge to mine development in this part of the Appalachian Coalfields.