Distribution of the Neogene Utsira Sand and the succeeding deposits in the Viking Graben area, North Sea

The sandy quartzose parts of the Utsira Formation, the Middle Miocene to mid Pliocene Utsira Sand, extends north–south along the Viking Graben near the UK/Norwegian median line for more than 450 km and 75–130 km east–west. The Utsira Sand is located in basin-restricted seismic depocentres, east of and below prograding sandy units from the Shetland Platform area with Hutton Sands. The Utsira Sand reaches thicknesses up to ca. 300 m in the southern depocentre and 200 m in the two northern depocentres with sedimentation rates up to 2–4 cm/ka. Succeeding Plio–Pleistocene is divided into seismic units, including Base Upper Pliocene, Shale Drape, Prograding Complex and Pleistocene. The units mainly consist of clay, but locally minor sands occur, especially at toes of prograding clinoforms (bottom-set sands) and in the Pleistocene parts, and the total thickness covering the Utsira Sand is in most places more than 800 m, but thins towards the margins.     

Structure and Quaternary tectonic history of the Woodlark triple junction region,Solomon Islands

The Woodlark triple junction region, a topographically and structurally complex triangular area of Quaternary age, lies east of Simbo Ridge and southwest of the New Georgia island group, Solomon Islands, at the junction of the Pacific, Australian and Solomon Sea plates. SeaMARC II side-scan imagery and bathymetry in conjunction with seismic reflection profiles, 3.5 kHz records, and petrologic, magnetic and gravity data show that the active Woodlark spreading centre does not extend into this region.South of the triple junction region, the Woodlark spreading centre reoriented at about 2 Ma into a series of short ESE-trending segments. These segments continued to spread until about 0.5 Ma, when the lithosphere on their northern sides was transferred from the Solomon Sea plate to the Australian plate. Simultaneously the Simbo transform propagated northwards along the western side of the transferred lithosphere, forming a trench-trench-transform triple junction located NNW of Simbo island and a new leaky plate boundary segment that built Simbo Ridge.As the Pacific plate approached, the area east of northern Simbo Ridge was tilted northwards, sheared by dominantly right-lateral faults, elevated, and intruded by arc-related magmas to form Ghizo Ridge. Calc-alkalic magmas sourced beneath the Pacific plate built three large strato-volcanic edifices on the subducting Australian plate: Simbo at the northern end of Simbo Ridge, and Kana Keoki and Coleman seamounts on an extensional fracture adjoining the SE end of Ghizo Ridge.A sediment drape, supplied in part from Simbo and Kana Keoki volcanoes, mantles the east-facing slopes of northern Simbo and Ghizo Ridges and passes distally into sediment ponded in the trench adjoining the Pacific plate. As a consequence of plate convergence, parts of the sediment drape and pond are presently being deformed, and faults are dismembering Kana Keoki and Coleman seamounts.The Woodlark system differs from other modern or Tertiary ridge subduction systems, which show wide variation in character and behaviour. Existing models describing the consequences of ridge subduction are likely to be predictive in only a general way, and deduced rules for the behaviour of oceanic lithosphere in ridge subduction systems may not be generally applicable.     

湄洲湾泥沙活动及海底冲淤变化

湄洲湾沙源少,海水含沙量低,平均值10～20g/m~3。冬季受东北季风及浙闽沿岸流影响,湾口含沙量高,达到34g/m~3;夏季受径流影响,湾内含沙量相对偏高,达到16g/m~3。泥沙的运移趋势:主航道基本朝外,两侧朝里。受强潮流作用,深槽及水下潮流冲沟受到冲刷,斜坡及潮坪略有淤积。     

北黄海长山群岛海域沉积环境初步研究

本文在获取１９８９－１９９３年黄海北部长山群岛海域沉积物大量数据基础上，借助沉积物粒度分析（Ｑ型），揭示出该海域具有在“岛屿效应”影响下的４种环境能量类型，分析了与其适应的环岛沉积环境及其分布特征。     

南麂列岛潮间带环境本底调查

本文系根据１９９２年８月和１９９３年２月（夏、冬两季）对南麂列岛潮间带的环境本底调查以及对水质、底质、生物样监测结果的资料整理而成。调查结果表明，潮间带水质、底质除个别断面外，均处于良好状态。生物体重金属残留量全部低于全国海岸带调查时统一的标准，生态环境条件较好。     

The Sponge Population of the Cabrera Archipelago (Balearic Islands): Characteristics, Distribution, and Abundance of the Most Representative Species

Abstract. The abundance, distribution, and species richness of the littoral sponges (0–55 m) from the Cabrera Archipelago (Balearic Islands) were studied along light gradients from the surface to the sea bottom and from cave mouths to their inner parts. A total of 98 species (11 Calcarea and 87 Demospongiae ) were recorded, 8 of which are new records for the Spanish coast.
Cluster and correspondence analyses enabled the identification of a sciophilous sponge group including three subgroups: sponges found only in semi-dark cave habitats, a subgroup common to the coralligenous, precoralligenous, and semi-dark cave biocoenoses, and a third subgroup exclusive to the coralligenous biocoenosis. A small number of photophilic species and other species having a wide bathymetric distribution made up another separate group. No species clusters for the different semi-sciophilous (either fleshy or carbonate) or photophilic seaweed communities were discernible. The number of sponge species was negatively correlated with the irradiance level.     

Scour at the head of a vertical-wall breakwater

This paper presents the results of an experimental investigation on the near-bed flow patterns, the bed shear stress amplification and scour around the head of a vertical-wall breakwater, using regular waves. The Keulegan-Carpenter number (KC), based on the diameter of the breakwater head, is found to be the major parameter that governs the flow and the equilibrium scour depth. Basic flow structures are identified as function of KC. The scour depth is found to increase with increasing the Keulegan-Carpenter number. The necessary extent of the conventional stone protection is studied. An empirical formula is worked out for the width of the protection layer as function of KC. Also, the effects of head shape, the angle of attack and the presence of a co-directional current are investigated. The results indicate that the scour depth is increased considerably in the presence of a current. Likewise, the scour depth is increased when the head shape is changed from a round shape to a sharp-edged one. It is found that the angle of attack is also an influencing factor as regards the scour depth.     

Regeneration of sand waves after dredging

Sand waves are large bed waves on the seabed, being a few metres high and lying hundreds of metres apart. In some cases, these sand waves occur in navigation channels. If these sand waves reduce the water depth to an unacceptable level and hinder navigation, they need to be dredged. It has been observed in the Bisanseto Channel in Japan that the sand waves tend to regain their shape after dredging. In this paper, we address modelling of this regeneration of sand waves, aiming to predict this process. For this purpose, we combine a very simple, yet effective, amplitude-evolution model based on the Landau equation, with measurements in the Bisanseto Channel. The model parameters are tuned to the measured data using a genetic algorithm, a stochastic optimization routine. The results are good. The tuned model accurately reproduces the measured growth of the sand waves. The differences between the measured weave heights and the model results are smaller than the measurement noise. Furthermore, the resulting parameters are surprisingly consistent, given the large variations in the sediment characteristics, the water depth and the flow field. This approach was tested on its predictive capacity using a synthetic test case. The model was tuned based on constructed predredging data and the amplitude evolution as measured for over 2 years. After tuning, the predictions were accurate for about 10 years. Thus, it is shown that the approach could be a useful tool in the optimization of dredging strategies in case of dredging of sand waves.     

台湾海峡西岸第四纪沉积层中的老红砂

本文对采自福建沿海的老红砂作了粒度分析、矿物鉴定和石英电镜扫描。结果表明,组成老红砂的成分主要为中细砂,砂含量大于70%,粘土和粉砂含量较少。概率累积曲线多为跳跃、悬浮两段式,其次为滚动、跳跃、悬浮三段式。轻矿物以石英为主,长石含量居次。含量较高的重矿物有磁铁矿、钛铁矿、白钛石,其次有锆石、赤铁矿、褐铁矿、电气石、绿帘石等。文章对老红砂的成因提出一些粗浅的看法。