基于航测的三维建模方法研究

随着“数字城市”项目在各大城市如火如荼地发展,城市景观重建是数字城市发展的首要步骤和重要内容。本文结合实际生产项目,对基于航测的三维建模方法进行研究。航测法三维建模通过立体采集建筑物平面几何高程数据,并结合测区DEM成果、影像数据等,使用Dibud软件自动生成三维模型,然后,使用3DMAX软件参考外业采集照片精细修模,给模型贴图等。     

Control of syntectonic erosion and sedimentation on kinematic evolution of a multidecollement fold and thrust zone: Analogue modeling of folding in the southern subandean of Bolivia

Several analogue modeling studies have been conducted during the past fifteen years with the aim to discuss the effects of sedimentation and erosion on Foreland Fold and Thrust Belt, among which a few have analyzed these processes at kilometric scale (Malavieille et al., 1993; Nalpas et al., 1999; Barrier et al., 2002; Pichot and Nalpas, 2009). The influence of syn-deformation sedimentation and erosion on the structural evolution of FFTB has been clearly demonstrated. Here, we propose to go further in this approach by the study of a more complex system with a double decollement level. The natural study case is the Bolivian sub-Andean thrust and fold belt, which present all the required criteria, such as the double decollement level. A set of analogue models performed under a CT-scan have been used to test the influence of several parameters on a fold and thrust belt system, among which: (i) the spatial variation of the sediment input, (ii) the spatial variation of the erosion rate, (iii) the relative distribution of sedimentation between foreland and hinterland. These experiments led to the following observations:

• 1. The upper decollement level acts as a decoupling level in case of increased sedimentation rate: it results in the verticalization of the shallower part (above the upper decollement level), while the deeper parts are not impacted.
• 2. Similarly, the increase of the erosion rate involves the uplift of the deeper part (below the upper decollement level), whereas the shallower parts are not impacted.
• 3. A high sedimentation rate in the foreland involves a fault and fold vergence reversal, followed by a back-thrusting of the shallower part.
• 4. A high sedimentation rate in the hinterland favours thrust development toward the foreland in the shallower parts.

     

利用Abel-Poisson径向基函数模型化局部重力场

多种类型高分辨率重力场数据的不断增加,使得在局部范围内精化重力场模型成为了可能。本文采用Abel-Poisson核将重力场量表示成有限个径向基函数线性求和的形式,对局部区域的多种重力场数据进行联合建模。为了提高运算速度,运用了基于自适应精化格网算法的最小均方根误差准则(RMS)来求解径向基函数平均带宽。以南海核心地区为例,联合两种不同类型、不同分辨率的重力场资料(大地水准面起伏6'×6'、重力异常2'×2'),构建了局部区域高分辨率的重力场模型。所建模型表示的重力场参量达到了2'×2'的分辨率,对原始的重力异常数据(2'×2')拟合的符合程度达到±0.8×10-5m/s2。结果表明,利用径向基函数方法进行局部重力场建模,避免了球谐函数建模收敛慢的问题,有效提高了模型表示重力场的分辨率。     

广义残差地形模型及其在局部重力场逼近中的应用

研究了残差地形模型中的非调和性问题,比较了基于棱柱体和球冠体的积分模型,提出了基于球冠体积分的广义残差地形模型。以泊松小波径向基函数为构造基函数,结合广义残差地形模型,融合多源实测重力数据构建了局部区域重力场模型。研究结果表明:基于棱柱体积分的残差地形模型精度较低,在山区可能引入毫伽级以上的误差,建议采用更为接近真实地形表面的球冠体积分模型。相比于原始的残差地形模型,基于球冠体积分的广义残差地形模型能更为精确地逼近局部重力场模型中地形因素引起的高频效应。     

基于 Lidar 数据和倾斜摄影的城市三维模型构建

针对传统建模方式建模效率低、模型纹理不够丰富真实等缺点,阐述一种以机载Lidar技术来获取地面点高精度的三维坐标、用倾斜摄影测量为三维建模提供纹理的一种新兴的三维建模方式。实验表明,该建模方式不仅工作效率高、真实反应城市空间布局,而且定位精度高、具备可量测分析功能等,同时提供DOM,DEM,点云数据,倾斜影像等数据。     

变形监测缺失数据序列灰色建模方法探讨

在测量工作中,由于气候环境、观测方法、观测仪器以及观测人员自身因素等多方面的原因,可能造成观测数据的丢失或者不完全。文中针对这类数据的处理,采用加权平均法和三次样条插值法对缺失数据进行修复,建立GM （1,1）模型,并与非等间隔预测模型进行对比。通过两组仿真数据和两组实测数据验证发现：对于呈指数增长的序列和高增长序列修复之后建模预测精度更高;三次样条插值法数据修复后GM （1,1）建模预测精度较加权平均法预测精度更高;对于低增长序列,直接采用非等间隔建模预测精度更高。     

平行轮廓线自适应插值的三维表面重构算法

针对稀疏点轮廓线在三维表面重构中存在的不够光滑、匹配易出错和难以交互等问题,提出了基于轮廓线插值的三维表面重构方法,并通过实验进行验证。文章分析了三维表面重构的形式化表达方法和准则,提出了基于虚跨距解决稀疏点轮廓线三维重构的基本思想;基于同步前进算法和虚跨距,设计了自适应等比例插值的同步前进三角面镶嵌算法;针对轮廓线插值违背三角表面重构拓扑准则的规律进行了分析,提出了相应的修正算法,保证了三角网的拓扑一致性。试验结果表明:本算法所构建的三角网表面更为光滑,各个三角面的大小更为均匀,具有更好的鲁棒性和交互性,对稀疏和稠密坐标点的轮廓线均能构建出更为理想的三维表面模型。     

创新型摄影测量教学实验系统的设计

为了在测绘学科教学实践中提高学生的理论水平和分析解决问题的能力,该文以摄影测量的生产流程为主线,研究实现从航空数据获取、像控点测量、空中三角测量、"4D"数据产品生成、三维建模与仿真到GIS属性入库的全过程模拟,旨在解决摄影测量课程教学过程中所面临的抽象、枯燥、高成本、高风险的问题;并以摄影测量实验系统采集的数据为基础,增加了控制测量、GIS入库、三维GIS等实验内容,以期为测绘学科的教学发展以及学生的实践能力提高作出贡献。     

体素模型的战场环境建模研究

针对基于面模型的战场环境建模难以展现战场环境要素的内部属性和规律等的不足,该文提出了利用体素模型实现战场环境建模的基本方法。该方法能够记录战场环境各要素的不同属性,反映其内部属性和规律,准确地模拟战场地理环境的变换过程,可实现战场环境各要素的统一建模。文章利用体素模型实现了对战场环境的认知与抽象,对战场环境体素数据模型进行了分类。最后以战场地形环境要素为例,利用战场环境基本体元实现了对战场地形环境的体素建模。     

Use of mineral/solution equilibrium calculations to assess the potential for carnotite precipitation from groundwater in the Texas Panhandle,USA

This study investigated the potential for the uranium mineral carnotite (K₂(UO₂)₂(VO₄)₂·3H₂O) to precipitate from evaporating groundwater in the Texas Panhandle region of the United States. The evolution of groundwater chemistry during evaporation was modeled with the USGS geochemical code PHREEQC using water-quality data from 100 groundwater wells downloaded from the USGS National Water Information System (NWIS) database. While most modeled groundwater compositions precipitated calcite upon evaporation, not all groundwater became saturated with respect to carnotite with the system open to CO₂. Thus, the formation of calcite is not a necessary condition for carnotite to form. Rather, the determining factor in achieving carnotite saturation was the evolution of groundwater chemistry during evaporation following calcite precipitation. Modeling in this study showed that if the initial major-ion groundwater composition was dominated by calcium-magnesium-sulfate (>70 precent Ca + Mg and >50 percent SO₄ + Cl) or calcium-magnesium-bicarbonate (>70 percent Ca + Mg and <70 percent HCO₃ + CO₃) and following the precipitation of calcite, the concentration of calcium was greater than the carbonate alkalinity (2mCa⁺² > mHCO₃⁻ + 2mCO₃⁻²) carnotite saturation was achieved. If, however, the initial major-ion groundwater composition is sodium-bicarbonate (varying amounts of Na, 40–100 percent Na), calcium-sodium-sulfate, or calcium-magnesium-bicarbonate composition (>70 percent HCO₃ + CO₃) and following the precipitation of calcite, the concentration of calcium was less than the carbonate alkalinity (2mCa⁺² < mHCO₃^- + 2mCO₃⁻²) carnotite saturation was not achieved. In systems open to CO_2, carnotite saturation occurred in most samples in evaporation amounts ranging from 95 percent to 99 percent with the partial pressure of CO₂ ranging from 10^−3.5 to 10^−2.5 atm. Carnotite saturation occurred in a few samples in evaporation amounts ranging from 98 percent to 99 percent with the partial pressure of CO₂ equal to 10^−2.0 atm. Carnotite saturation did not occur in any groundwater with the system closed to CO₂.