Evaluation of density in layer compaction using SASW method

SASW test, which is non-intrusive and rapid in the field application, was used to evaluate the layer density in the roller compaction without performing the complicated inversion process. The concept of normalized shear wave velocity was introduced to minimize the effect of confinement in the density evaluation. SASW test was performed to determine the shear wave velocity of the layer, and the free–free resonant column (FF–RC) test was adopted to determine the correlation between the normalized shear wave velocity and density of the site, which is almost unique independent of confinement. Testing and data reduction procedures of both tests were briefly discussed and an evaluation procedure of the field density was proposed by effectively combining in-situ shear wave velocity determined by the SASW test with the correlation between the normalized shear wave velocity and the density determined by the FF–RC test. Finally, the feasibility of the proposed method was verified by performing a field case study at Hoengsung road construction site. Field densities determined by the proposed method matched well with those determined by sand cone tests, showing the potential of applying the proposed method in the field density evaluation.     

Scattering of seismic waves by cracks in multi-layered geological regions: II. Numerical results

The mechanical model for plane strain, time-harmonic seismic wave propagation problems in cracked, multi-layered geological regions with surface topography and non-parallel interfaces was described in the first part of this work. Here, this model is used to investigate the response of such a region to the presence of traveling elastic waves generated by a seismic source. The computational methodology that was developed in the first part is based on a combination of both the regular (displacement-based) and the hypersingular (traction-based) Boundary Integral Equation Method (BIEM). First, the accuracy and convergence characteristics of this hybrid BIEM are studied. Then, a series of problems involving four different configurations of a reference geological deposit with both interface and internal cracks are solved, for a loading that is due to a seismically-induced pressure wave propagating upwards from the underlying rigid half-plane. The purpose of the numerical study is to investigate the influence of various key parameters of the problem, such as frequency and incidence angle of the incoming wave, size of the surface relief, location and size of the buried cracks, interaction effects between cracks and finally the presence of layers, on both the scattered displacement field and the stress concentration field.     

Self‐purification in Upland and Lowland Streams

Ecological investigations at four streams in Saxony‐Anhalt have shown that there are considerable differences between the self‐purification power of upland and lowland streams. This result is reflected in chemistry and in microbiology. The structure of the bottom substrate mainly influences the degree of self‐purification in connection with rate of flow and flow velocity. The results and differences are demonstrated using the example of Katzsohlbach in the landscape unit “Mittel‐ and Unterharz” and the stream Olbe in the landscape unit “Magdeburger Börde”.     

Trace metals in acid sediments and waters, Pimpama catchment, southeast Queensland, Australia

The Pimpama River floodplain has developed over the last several thousand years as a result of sea-level fluctuations that shaped the lower catchment and enabled the formation of sedimentary pyrite. The subsequent production of sulfuric acid due to the oxidation of this pyrite enhances the breakdown of metal-bearing sediments and can lead to leaching of major and trace metals into the waters of the region. The seasonal pattern of rainfall and current land-use activities are important aspects that intensify the natural production of acid and influence the release and distribution of metals. To identify the source and migration of metals in the Pimpama catchment and to understand the impact of pyrite oxidation on the distribution of metals in sediments and waters, several components of the drainage system were analyzed: bedrock, sediments from river bed and bank, and water. The elements analyzed in this study (V, Cr, Co, Ni, Cu, Zn and Pb) are all present in the bedrock material which explains their occurrence in the unconsolidated sediments of the floodplain. These metals concentrate in the upper section of the sedimentary sequence and their presence is related to clay minerals such as smectite, organic matter and iron phases. However, Zn, Mo and Co occur in higher amounts than the local background and within standard shale. This comparison suggests that the diagenetic processes alone cannot explain the higher concentrations and it is concluded that these metals also have an anthropogenic source. The formation of sulfuric acid creates conditions for higher mobility of some metals, such as Cr, Co, Ni, Cu, Zn, but does not affect less mobile ones such as Mo and Pb. Over the longterm, the production of acid influences the breakdown of mineral phases and enhances the process of weathering. Over the short term, every rain event leaches acid from sediments and mobilizes metals resulting in a substantial reduction in the quality of river water. Received: 2 October 1998 · Accepted: 16 February 1999     

Controls on the nature and distribution of an alga in coal mine-waste environments and its potential impact on water quality

 A dominant non-bacterial microorganism that may strongly impact environmental conditions in acid mine drainage at several Indiana coal mine sites is a single-celled protozoan, Euglena mutabilis. Field data suggest E. mutabilis has high tolerance for elevated total dissolved solids (TDS), to 18 g/l, and acid conditions to pH 1.7. Distribution is restricted to unmixed effluent pH<4.6, with prolific growth between pH 3.0 and 3.5. Additional factors influencing E. mutabilis include preference for areas with lower mineral/colloidal precipitation rates and a stable substrate of iron-rich precipitates. Initial studies indicate that in areas of prolific growth it contributes to oversaturation of dissolved oxygen by up to 200%. The presence of small orange intracellular crystalline-like structures, similar in color to iron oxyhydroxides, suggests that E. mutabilis may be sequestering iron, and possibly other metals. Further work is needed to determine if E. mutabilis contributes to natural mitigation of poor water quality at these and other coal mine sites. Received: 13 January 2000 · Accepted: 2 May 2000     

Storm deposits and storm-generated coarse carbonate breccias on a pelagic outer shelf (South-East Basin, France)

Uppermost Jurassic limestones of the South‐East Basin (France) are organized into four facies associations that were deposited in four distinct zones: (1) peritidal lagoonal limestones; (2) bioclastic and reefal limestones; (3) pelagic lime mudstones; (4) lime mudstones/calcarenites/coarse breccias. Calcarenite deposits of zone 4 exhibit sedimentary structures that are diagnostic of deposition under wave‐induced combined flow. In subzone 4a, both vertical and lateral transitions from lime mudstone/calcarenite to breccia indicate in situ brecciation under wave‐cyclic loading. Breccias were produced by heterogeneous liquefaction of material previously deposited on the sea floor. Deposits in subzone 4a record relatively long periods (>400 kyr) of sedimentation below wave base, alternating with periods of deposition under wave‐induced currents and periods of in situ deformation. In this zone, storm waves were attenuated by wave–sediment interaction, and wave energy was absorbed by the deformation of soft sediment. With reference to present‐day wave attenuation, water depths in this zone ranged between 50 and 80 m. Landwards of the attenuation zone, in zone 3, storm waves were reduced to fair‐weather wave heights. Storm wave base was not horizontal and became shallower landwards. As a consequence, water depth and wave energy were not linearly related. On a small area of the seaward edge of subzone 4a, cobbles were removed by traction currents and redeposited in subzone 4b. There, they formed a 100‐m‐thick wedge, which prograded over 3 km and was built up by the stacking of 5‐ to 20‐m‐thick cross‐stratified sets of coarse breccia. This wedge records the transport and redeposition of cobbles by a high‐velocity unidirectional component of a combined flow. The increase in flow velocity in a restricted area is proposed to result from flow concentration in a channel‐like structure of the downwelling in the gulf formed by the basin. In more distal subzone 4c, the hydrodynamic effect of wave‐induced currents was quasi‐permanent, and brecciation by wave–sediment interaction occurred only episodically. This indicates that, seawards of the attenuation zone, hydrodynamic storm wave base was deeper than mechanical storm wave base. Uppermost Jurassic carbonates were deposited and soft‐sediment deformed on a hurricane‐dominated ramp of very gentle slope and characterized by a zone of storm wave degeneration, located seawards of a zone of sedimentation below wave base.     

SOURCE RADIATION AND RESPONSES OF WAVE PROPAGATION

Recordings of seismic waves propagating from earthquake source to a station at the earth's surface are a system response function.The convolution operator in time domain can be simplified as a multiplication operator in frequency domain.We discuss in frequency domain the separation of source,path and site effects for global scaling of earthquake source radiation.Also discussed are source scaling model,faulting mechanism,and the H/V inversion problems with crustal and near surface structures.Gross features of apparent source spectra appear to be not much region-dependent although there may be difference between tectonic styles within a region of tectonic mixture for which we need further study as data accumulate.Vertical spectra may be a better approach to approximate source radiation,as it has less crustal amplification effects than horizontal spectra.The H/V ratio is evidently a comprehensive indicator of amplification effects from near surface to deep structure.This gives it potential as an inversion tool to deduce site crustal structure.     

Thermoelastic model of minerals: application to Al2O3

 A thermoelastic model for calculating the high-pressure and high-temperature properties of isotropic solids is presented by extending the formalism by Thomsen and combining the resulting one with the Vinet model for static lattice and the Debye model for lattice vibration. Applying it to polycrystalline corundum, we have shown that the calculated values of entropy and heat capacity at constant pressure are in agreement with literature values to 2325 K at zero pressure and that the calculated values of thermal expansivity agree reasonably with experimental data to 1100 K at zero pressure. The model reproduces experimental data of sound velocities v _p and v _s of compressional and shear waves to 1825 K at zero pressure and those to 62 GPa at room temperature, and it reproduces also experimental shock-wave equation of state to 150 GPa. The velocity correlation (∂ln v _s /∂ln v _p ) _S was found to have weak pressure and temperature dependences and the results under lower mantle conditions are compared with those of magnesian and calcium silicate perovskites and magnesiowüstite, and the PREM values of the Earth's lower mantle. Received: 12 February 2000 / Accepted: 15 July 2000     

湖南地热资源分布及远景区划

湖南中新生代地质构造背景特殊，因而发育了丰富的地下热水资源。初步总结了省内地下热水资源的分布规律、水化学特征及其与地质构造的关系，划分了湘西北慈利－桑植－吉首、湘中隆回－武岗－洞口、湘东娄底－株洲－衡阳及湘南郴州－宜章－汝城4个地热异常区，为地热远景开发区划提供了基础资料。     

西北区东部寒潮天气短期预报

分析了西北区东部寒潮短期预报的气候概况和环流特征，对不同类型寒潮个例进行归纳总结，组合成预报规则，建立了短期寒潮预报模式，输入计算机得出有无寒潮天气预报