GMS－5水汽图象所揭示的青藏高原地区对流层上部水汽分布特征

该文利用１９９５年６月中旬至７月初ＧＭＳ－５水汽图象,对青藏高原地区对流层上部水汽分布进行了初步分析．发现高原地区对流层上部水汽的汇集主要通过以下４种方式进行：①水汽从高原东南方的雅鲁藏布江河谷等地进入高原,是主要路径;②从西南方越过喜马拉雅山进入高原;③从帕米尔及其以北地区漂过塔里木盆地后进入高原;④对流活动可以引起水汽在高原上空积聚．从多时相平均水汽图象上反映出高原上西北干、东南湿的水汽分布特征,并初步讨论了水汽图象所揭示的在高原生成的系统对我国东部天气的影响．     

Transport of waste heat from a nuclear power plant into coastal water

A numerical and experimental modeling is presented for studying the transport of waste heat from a nuclear power plant into coastal water by using a full-field physical model with scale distortion, a local physical model with normal scale and a depth-averaged k− turbulence model with a modified second-order upwind scheme. Field investigations are also used to provide the calibration and validation of the modeling. A case study simulating the turbulent tidal flow and waste heat transport in the coastal water near Daya Bay Nuclear Power Plant in Southern China was conducted. The experimental result of the case study shows that the water temperature in coastal water was a little oversimulated near the surface and was a little undersimulated near the bottom of heated-water layer by the full-field physical model. The numerical study shows that the depth-averaged k− turbulence model presented a satisfied prediction of turbulent tidal flow and far-field temperature distribution in coastal water, although the near-field stratification due to the heated water effluent was not accounted for. The result of the effect of scale distortion on physical model shows that a full-field physical model with a scale distortion of 10 produced a satisfied result of temperature distribution in the present case study.     

A two-dimensional analytical model of vertical water entry for asymmetric bodies with flow separation

The vertical water entry of asymmetric two-dimensional bodies with flow separation is considered. As long as there is no flow separation, linearised Wagner's theory combined with the modified Logvinovich model has been shown to provide computationally fast and reliable estimates of slamming loads during water entry. Tassin et al. [11] introduced the fictitious body continuation (FBC) concept as a way to extend the use of Wagner's model to separated flow configurations, but they only considered symmetric bodies. In the present study, we investigate the ability of the FBC concept to provide accurate estimates of slamming loads for asymmetric bodies. In this case, flow separation may not occur simultaneously on both sides of the body. During an intermediate phase, slamming loads are governed by a competition between the local drop in pressure due to partial flow separation and the ongoing expansion of the wetted area. As a first benchmark for the model, we consider the water entry of an inclined flat plate and compare the FBC estimates with the results of a nonlinear model. Then, we consider the case of a foil and compare the FBC results with computational fluid dynamics predictions. In both cases, we find that the FBC model is able to provide reliable estimates of the slamming loads.     

Chromite in the Paricutin lava flows (1943–1952)

Small euhedral chromite crystals are found in olivine macrophenocrysts (Fo_80–84) from the basaltic andesites (150 ppm Cr) erupted in 1943–1947, and in orthopyroxene macrophenocrysts of the andesites (75 ppm Cr) erupted in 1947–1952. The majority of the chromite octahedra are 5–20 μm in diameter, and some are found in clusters and linear chains of three or more oriented chromite crystals. The composition of the majority of the chromite grains within olivine and orthopyroxene macrophenocrysts is Fe²⁺/(Fe²⁺+Mg)=0.5–0.6, Cr/(Cr+Al)=0.5–0.6 and Fe³⁺/(Fe³⁺+Al+Cr)=0.2–0.3. The chromite crystals in contact with the groundmass are larger, subhedral, and grade in composition from chromite cores to magnetite rims. Comparison of the composition of chromite with those of other volcanic rocks shows that the most primitive Paricutin chromite is richer in total iron and higher in Fe³⁺/(Fe³⁺+Al+Cr) than primary chromite in most lavas. The linear chains of oriented chromite octahedra are found in olivine and orthopyroxene macrophenocrysts, and in the groundmass. These chromite chains are thought to result from diffusion-controlled crystallization because of the very high partition coefficient (1000) of Cr between chromite and melt. We conclude that chromite was a primary phase in the lavas at the time of extrusion and that magnetite only crystallized after extrusion during cooling of the lava flows. The presence of chromite microphenocrysts in andesitic lavas containing as little as 70 ppm Cr can be explained by dissolved H₂O in the melt depressing the liquidus temperature for orthopyroxene such that chromite becomes a liquidus phase. The influence of dissolved H₂O can also explain the lack of plagioclase macrophenocrysts in most of the lavas and the relatively high partition coefficient (20) of Ni between olivine and melt and the high partition coefficient (40) of Cr between orthopyroxene and melt. The liquidus temperature of the basaltic andesite is estimated to have been less than 1140°C, assuming H₂O>1 wt.%, and the log f_O2 to have been above that of the QFM buffer. The chromite and orthopyroxene liquidus temperature of the andesites, assuming H₂O>1 wt.%, is estimated to have been 1100°C or less. The derivation of the later andesites from the earlier basaltic andesites has been explained by a combination of fractional crystallization of olivine, orthopyroxene and plagioclase, and assimilation of xenoliths. The significantly lower Cr, Ni and Mg of the andesites may have been in part due to the separation of olivine macrophenocrysts plus enclosed chromite crystals from the earlier basaltic andesites.     

应力释放模型的改进及其在研究台湾地区地震预测问题中的应用.

应力释放模型过去主要用于研究大范围历史大地震活动规律．本文对应力释放模型进行了改进，对其能否运用于区域更小、时段更短、震级更低的情况进行了探讨；以台湾地区近百年6级以上地震为例的研究结果表明，应力释放模型仍然适用．在回溯性的地震预测检验中，用改进的应力释放模型计算出台湾地区地震发生的条件概率强度，并用其预测6级以上地震的发震时刻．结果表明，其预测精度优于泊松模型．      

湾一井水位年动态变化研究

详细讨论了富裕湾一井的年动态变化趋势。结果表明湾一井各阶段的年动态变化可拟合为一线性方程，不同阶段水位上升速度改变可能与井头分流作用有关，中强地震前的漏斗形异常和人为因素引起的水位变化可通过水位恢复时上升速率不同而加以识别。     

图像ROI选择及其应用研究

在辐射成像应用中, DR及CT检测会产生大量的图像数据, 对这些图像数据的处理涉及图像处理技术的方方面面。这些处理技术包括重建、可视化、图像增强、图像压缩和图像缺陷分析等。通常人们需要对图像中的特定区域 (ROI) 进行处理, 并对图像上的ROI进行选择。ROI的确定, 编辑是辐射成像图像处理的常用功能。本文介绍常用各种ROI, 实现了这些ROI的勾画、编辑、选择等功能, 并介绍了ROI与孔隙度计算及缺陷识别等应用的结合。     

矿井涌水量预测的比拟法计算公式待定系数讨论

以典型矿山多年实际的开采及排水序列资料为基础、相关学科理论为指导,通过对开采及排水资料的"二次开发",探讨了不同水文地质类型矿床的矿井涌水量预测比拟法计算公式中待定系数的特点,以及随开采面积(F)和开采疏干降深(S)的变化趋势和规律。研究结果表明:参数"m"、"n"是随开采疏干降深(S)和开采面积(F)增加而加大的变量;不同类型矿床中参数n值均大于m值;岩溶水充水矿床中参数"m"、"n"相对稳定,而基岩裂隙水充水矿床具有明显的分段性特征。指出了单纯"面积比拟法"、"降深比拟法"对矿井涌水量预测的不合理性,以及在参数"m"、"n"取值中加强水文地质勘查资料综合研究的重要性。     

贵州草海湿地不同水位梯度土壤碳、氮、磷含量及其生态化学计量比分布特征

对贵州草海湿地4种水位梯度下(农田区、过渡区、浅水区和深水区)表层土壤(0～10-cm)碳、氮、磷含量及其生态化学计量比进行研究,以期揭示草海湿地不同水位梯度下土壤碳、氮、磷生态化学计量比的分布特征及其影响因素.结果表明:土壤总有机碳(TOC)、总氮(TN)及总磷(TP)含量在不同水位梯度之间均差异显著,由过渡区至深水区,土壤TOC及TN含量均呈递增趋势,而TP含量呈先降低后增加的趋势;农田区土壤TN含量显著高于浅水区,但深水区土壤TP含量显著低于农田区.不同水位梯度土壤碳氮比(C/N)、碳磷比(C/P)和氮磷比(N/P)也存在显著差异,由过渡区至深水区,土壤C/P和N/P均呈递增趋势,而C/N呈先增加后降低的趋势;与过渡区相比,农田区土壤C/N、C/P和N/P总体偏低.相关性分析表明:土壤C/N、C/P和N/P的空间分布与土壤TOC、TN、含水量等理化性质有关.可见,草海湿地水位变化对土壤TOC、TN和TP含量以及C/N、C/P及N/P的空间分布具有显著影响,且水位升高有利于增强土壤碳、氮、磷的固存潜力.