Aquatic fungi growing on dead fragments of submerged plants

The authors investigated the dead fragments of 22 species of submerged plants in the water from three limnological and trophical different water bodies (spring, river and pond). A total of 184 species of aquatic fungi, including 119 zoosporic and 65 conidial species were found on the fragments investigated plants. The most common fungus species were Aphanomyces laevis, Saprolegnia litoralis, Pythium rostratum (zoosporic fungi) and Acrodictys elaeidicola, Anguillospora longissima, Angulospora aquatica, Lemonniera aquatica, Mirandina corticola, Tetracladium marchalianum, Tetracladium maxiliformis, Trinacrium subtile (conidial fungi).

Most fungus species were observed on the specimens of Elodea canadensis (33 fungus species), Hippuris vulgaris f. submersa (33), Myriophyllum spicatum (34) and Potamogeton crispus (33), fewest on Ceratophyllum demersum (24), Fontinalis dalicarlica and Potamogeton nitens (each 25).

The most fungi were growing in the water from River Supraśl (107), the fewest in the water from Pond Dojlidy (99). Some aquatic fungus species were observed in the water of only one of the three water bodies – in Pond Dojlidy (30), in Spring Jaroszówka (32) and in the River Supraśl (39) species. Seventy-five species growing only on fragments of single submerged plants. A number of zoosporic and conidial species (22 and four, respectively) appeared new to Polish waters. Out of these 119 zoosporic species, some are known as parasites or necrotrophs of fish.     

Origin of the high variability of water mineral content in the bedrock aquifers of Southern Madagascar

This study assesses the causes of the high spatial variability of the mineral content of groundwater in crystalline bedrock of Southern Madagascar. Although many kilometres from the coast and at a mean altitude of 400 m a.s.l, wells drilled in this area produce water with electrical conductivities in the range of 300–30,000 μS cm⁻¹ with a high spatial variability. Chemical and isotopic data are used to identify the processes involved in the groundwater mineralization. It is shown that the chemical composition of the groundwater in this region has its origin in (i) normal silicate and carbonate weathering reactions and (ii) input of marine salts, probably via rainfall recharge, modified by evapo-concentrative processes probably including precipitation and re-dissolution of secondary evaporites in the unsaturated zone. To obtain a better understanding of the spatial salinity distribution, well parameters such as yields, weathered zone thickness, weathered materials and morphological positions (upper slope, mid-slope, lower slope or valley bottom) are scrutinized.

A correlation was found between high salinity and low flow, shallow groundwater environments (flat hill tops, valley bottoms, weakly developed and clayey weathered zones) and between low salinity and high flow environments (granular, well-developed weathered zones and situation on valley slopes).     

致密砂岩的形成机制及其地质意义——以塔里木盆地英南2井为例

砂质岩的孔隙和喉道被网格状粘土矿物和次生加大矿物充填成微细孔喉状结构时,形成具有较高毛细管压力的致密砂岩。它与地层水发生水锁效应,可大大降低渗透率,成为致密砂岩盖层。当含水饱和度在50%以下时,束缚水饱和度比较低,致密砂岩储层可以产气;当含水饱和度在50%～90%区间时,具有较高的束缚水饱和度,相对渗透率非常低,它既不能产气也不能产水,反映为渗透率瓶颈区(具有盖层性质);当含水饱和度大于90%以上时,致密砂岩储层仅微量产水。塔里木盆地英南2井侏罗系气藏盖层由致密砂岩构成,不含水时的气体渗透率在(0.027～0.081)×10-3μm2,不能构成封堵;当含水饱和度达到60%以上时,相对渗透率几乎为零,构成有效盖层。     

The effect of water on accessory phase solubility in subaluminous and peralkaline granitic melts

The solubilities of columbite, tantalite, wolframite, rutile, zircon and hafnon were determined as a function of the water contents in peralkaline and subaluminous granite melts. All experiments were conducted at 1035 °C and 2 kbar and the water contents of the melts ranged from nominally dry to approximately 6 wt.% H₂O. Accessory phase solubilities are not affected by the water content of the peralkaline melt. By contrast, solubilities are affected by the water content of the subaluminous melt, where the solubilities of all the accessory phases examined increase with the water content of the melt, up to 2 wt.% H₂O. At higher water contents, solubilities are nearly constant. It can be concluded that water is not an important control of accessory phase solubility, although the water content will affect diffusivities of components in the melt, thus whether or not accessory phases will be present as restite material. The solubility behaviour in the subaluminous and peralkaline melts supports previous spectroscopic studies, which have observed differences in the coordination of high field strength elements in dry vs. wet subaluminous granitic glasses, but not for peralkaline granitic glasses. Lastly, the fact that wolframite solubility increases with increasing water content in the subaluminous melt suggests that tungsten dissolved as a hexavalent species.     

Hydrography of the eastern Arabian Sea during summer monsoon 2002

Hydrographic observations in the eastern Arabian Sea (EAS) during summer monsoon 2002 (during the first phase of the Arabian Sea Monsoon Experiment (ARMEX)) include two approximately fortnight-long CTD time series. A barrier layer was observed occasionally during the two time series. These ephemeral barrier layers were caused byin situ rainfall, and by advection of low-salinity (high-salinity) waters at the surface (below the surface mixed layer). These barrier layers were advected away from the source region by the West India Coastal Current and had no discernible effect on the sea surface temperature. The three high-salinity water masses, the Arabian Sea High Salinity Water (ASHSW), Persian Gulf Water (PGW), and Red Sea Water (RSW), and the Arabian Sea Salinity Minimum also exhibited intermittency: they appeared and disappeared during the time series. The concentration of the ASHSW, PGW, and RSW decreased equatorward, and that of the RSW also decreased offshore. The observations suggest that the RSW is advected equatorward along the continental slope off the Indian west coast.     

Environmental pollution impact on water and sediments of Kumaun lakes, Lesser Himalaya, India: a comparative study

A study of the water and sediment chemistry of the Nainital, Bhimtal, Naukuchiyatal and Sattal Lakes of Kumaun, has shown that the water of these lakes are alkaline and that electrical conductivity, total dissolved solid and bicarbonate HCO ₃ ⁻ are much higher in Nainital than in the other three lakes. The weathering of limestone lithology and anthropogenic pollution, the latter due to the very high density of population in the Nainital valley, are the primary sources of enhanced parameters. The low pH of Nainital Lake water is due to low photosynthesis and enhanced respiration, increasing CO₂ in the water and the consequent enhancement of Ca²⁺ and HCO ₃ ⁻ . The dissolved oxygen in Nainital Lake is less compared to other lakes, indicating anoxic conditions developing at the mud–water interface at depth. The PO ₄ ³⁻ content in Nainital is higher (124 μg/l), showing an increasing trend over time leading to eutrophic conditions. The trace metals (Cu, Co, Zn, Ni, Mn, and Sr) are present in greater amounts in the water of Nainital Lake than in the other three lakes, though Fe and Cr are high in Bhimtal and Fe in Naukuchiyatal. The higher abundance is derived from the leaching of Fe–Mg from metavolcanic and metabasic rocks. Most of the heavy metals (Cr, Ni, Cu, Mn, Fe, Sr, and Zn) significantly enrich the suspended sediments of the lakes compared to the bed sediments which due to their adsorption on finer particles and owing to multiple hydroxide coating and organic content, except for Fe, which is enriched in the bed sediments. The high rate of sedimentation, 11.5 mm/year in Nainital, compared to Bhimtal with 4.70 mm/year, Naukuchiyatal with 3.72 mm/year, and Sattal with 2.99 mm/year, has resulted in shorter residence time, poor sorting of grains, and lesser adsorption of heavy metals, leading consequently, their depletion in the bed sediments of Nainital Lake.     

Water pollution in gold mining industry: a case study in Roşia Montană district, Romania

The preliminary study of streams and rivers from the Roşia Montană area revealed that the concntration of heavy metals— Cd, Mn, Cu, Pb, and Zn—are above accepted limits. The gold extraction method is based on flotation. The most important pollution sources are mine tailings. The determinations were performed for samples collected in: April 2004, July 2004, September 2004, November 2004, February 2005 and May 2005. The highest concentrations were found for cadmium in September 2004: 0.17 mg/L; for copper in September 2004: 1.38 mg/L; for manganese in July 2004: 239.4 mg/L; for lead in May 2005: 0.54 mg/L; and for zinc in September 2004: 35.37 mg/L;. This study involved three small rivers (streams) that flow into the Mureş River and finally into the Danube River, having a great impact on human health and environmental stability in the area. In May 2005, a sample of drinking water from the mining district was also collected.     

Profondeur d'extraction racinaire et signature isotopique de l'eau prélevée par les racines des couverts végétaux

We seek to identify the depth to which water is extracted by the roots in the soil. Indeed, in an isotopic steady-state condition of leaf water, transpiration introduces into the atmosphere a vapour whose isotopic signature is identical to that of root water. In the isotopic models of atmospheric general circulation, it is classically allowed that the signature of transpiration belongs to the meteoric water line. This supposes that the water taken by the roots has escaped with the evaporation of the soil and comes thus from the deep layers of the soil. At the time of experimentation carried out on maize plants (Nemours, Seine-et-Marne, France), this extraction depth was inferred from the comparison between the signature of the water measured on the level of the first internode of the stems of the plants and the isotopic profile of water in the soil. When the flow of transpiration reaches a maximum value, the plant uptakes water resulting from precipitations and which preserves its non-evaporating character after having quickly infiltrated in the deep layers of the soil. This relates to only 55% of the flux transpired by the canopy, the remainder presenting an evaporating character more or less marked according to ambient conditions. This experiment invalidates the classical hypothesis used in isotopic models of general atmospheric circulation in temperate regions. In fact, only half the amount of water vapour transpired by the canopy during the day presents a signature similar to that of the rainwater sampled in deep soil layers. To cite this article: Z. Boujamlaoui et al., C. R. Geoscience 337 (2005).     

CGD-1型大口径全套管冲击抓斗的设计和应用

CGD－1型大口径全套管冲击抓斗主要是配套全套管钻机施工而研制的。该抓斗主要适用于复杂地层的施工。介绍了该抓斗的技术参数、性能特点、主要结构及试验情况。     

Temporal and spatial variations in water flow and sediment load in Narmada River Basin, India: natural and man-made factors

The Narmada River flows through the Deccan volcanics and transports water and sediments to the adjacent Arabian Sea. In a first-ever attempt, spatial and temporal (annual, seasonal, monthly and daily) variations in water discharge and sediment loads of Narmada River and its tributaries and the probable causes for these variations are discussed. The study has been carried out with data from twenty-two years of daily water discharge at nineteen locations and sediment concentrations data at fourteen locations in the entire Narmada River Basin. Water flow in the river is a major factor influencing sediment loads in the river. The monsoon season, which accounts for 85 to 95% of total annual rainfall in the basin, is the main source of water flow in the river. Almost 85 to 98% of annual sediment loads in the river are transported during the monsoon season (June to November). The average annual sediment flux to the Arabian Sea at Garudeshwar (farthest downstream location) is 34.29×10⁶ t year⁻¹ with a water discharge of 23.57 km³ year⁻¹. These numbers are the latest and revised estimates for Narmada River. Water flow in the river is influenced by rainfall, catchment area and groundwater inputs, whereas rainfall intensity, geology/soil characteristics of the catchment area and presence of reservoirs/dams play a major role in sediment discharge. The largest dam in the basin, namely Sardar Sarovar Dam, traps almost 60–80% of sediments carried by the river before it reaches the Arabian Sea.