河南洛宁段河金矿流体包裹体研究和矿床成因

河南省洛宁县段河石英脉型金矿主要包括石寨沟和岭东两个矿区,分别由3～4条含金石英脉构成。矿化过程从早到晚包括石英-黄铁矿、石英-多金属硫化物和石英-碳酸盐等3个阶段．其中中阶段金矿化最强,次为早阶段。各阶段石英中流体包裹体以气液两相包裹体为主．次为纯液体包裹体。激光拉曼测试表明,气液两相包裹体的液相为H2O,气相主要为Ho和CO2混合、纯H2O,次为纯CO2;纯液体包裹体为纯H2O。石寨沟矿区包裹体均一温度从早到晚依次为240．9～315．9℃．188．7～304．5℃,137．3～259．3℃：流体盐度变化依次为（6．74～12．85）wt%NaCl．eq,（2．41～8．68）wt％NaCl．eq,（2．24-7．86）wt%NaCl．eq。岭东矿区均一温度从早到晚依次为303．7-343．1℃,251．8-325．4℃,305．7～355．0℃：流体盐度变化依次为（5．11～11．70）wt％NaCl．eq,（2．74-10．11）wt％NaCl．eq,（0．53-6．74）wt％NaCl．eq。两矿区主成矿期流体均为中温、低盐度,早阶段流体为改造热液和变质热液的混合体,含一定量CO2,且流体CO2含量和盐度从早到晚逐渐降低。石寨沟矿区包裹体均一温度逐渐降低,而岭东矿区包裹体均一温度先降后升,加之岭东矿区各阶段成矿温度均高于石寨沟矿区．表明成矿流体系统主要受岩浆热驱动,岭东矿区更靠近岩体,且在晚阶段又有脉动性的岩浆加热．段河金矿区南部存在隐伏岩体。     

浅析库车前陆盆地水文地质条件与铀成矿作用

根据库车前陆盆地水文地质条件,分析了地下水的铀成矿作用,并通过热力学计算等方法,对水中铀的存在形式及铀的溶解、迁移和沉淀富集过程作了较为详细的论述,阐明了盆地水化学及铀水文地球化学环境,并提出了成矿有利地段和有利层位。     

寨上金矿床控矿因素及成矿远景分析

文章综述了寨上金矿床的地质特征,分析了控矿因素,认为泥盆系和二叠系是矿区的矿源层,构造对成矿有决定性的作用,说明了断裂与成矿的关系,从成矿地质环境、工程控制程度和物化探异常三个方面分析了成矿远景,指出矿区有着较大的找矿潜力。     

辽宁东五家子金矿矿脉含矿性评价标志研究

辽宁东五家子金矿的矿脉由蚀变岩和石英脉透镜体构成,可采矿体均为硫化物石英脉型.工业矿脉中,石英为烟灰色,发育他形、半自形的细粒黄铁矿等硫化物,有较大规模的矿体.矿化脉中,石英为乳白色,发育粗粒、自形的浅色黄铁矿,无可采矿体.在工业矿脉、次要矿脉、矿化脉的蚀变岩和石英脉样品中,Au,Hg与其他元素的相关性有明显区别.用石英脉样品的As-Ni-Ba图解和蚀变岩样品的Au-Ag-Ba图解预测,矿区外围的西沟1号脉和西沟3号脉属于工业矿脉.     

深部找铀及湘南-桂北地区深部找铀潜景分析

概述了国内外深部找矿的研究成果,指出深部找矿是当今发展的趋势。国内外重大矿产的成功发掘,其深度均在千米以上,铀矿化垂向分布深度可达4 km以上。综合介绍了国内外勘查深大矿床的特点和条件,认为岩石-构造条件是深部矿化定位的重要因素,复式岩体、成矿系统的垂向变化、构造地球物理-地球化学异常模型是深部找矿的关键依据。综述了中国南方湘南—桂北地区深部找铀的有利地质构造条件和潜力,成矿流体是该区铀矿化的根源,白垩—第三纪重大地质事件是该区深部铀成矿的重要前提,重大地质事件引发的NE-NNE,NW向深大断裂及断陷盆地是铀矿化赋存的重要场所和勘查靶区。在已知铀矿田、成矿带勘查范围基础上,在该区进行深部探索将会获得重大突破。探讨了湘南—桂北地区深部找铀的勘查思路和方法。     

滇西龙川江盆地铀矿化特征

龙川江盆地是滇西主要的铀矿赋矿盆地之一,现已探明一批砂岩型铀矿床。本文根据野外地质调查及室内系列编图,运用水成铀矿成矿理论,对龙川江盆地的基本特征及铀矿化特征进行了讨论,认为铀矿床主要分布于西部斜坡带,赋存于冲积扇沉积体系砂体中,且与潜水层间氧化带关系密切。     

Gold Mineralization and Occurrence of Sinter in the Hoshino Area, Fukuoka Prefecture, Japan

Abstract. Several epithermal gold deposits occur in the Hoshino area, which is located in the western end of the late Cenozoic Hohi volcanic zone, north‐central Kyushu, Japan. The area is characterized by intermediate to felsic extrusive rocks of Pliocene age. In the Hoshino area, the shallow manifestation of the hydrothermal activity is exposed on the surface. Several outcrops of sinter are still preserved on the top of hydro thermally altered volcanic rocks, and high‐grade gold‐bearing quartz veins occur on the surface at lower levels. The hydrothermal alteration resulted into well‐developed alteration zones. The zonal alteration pattern, primarily of near‐neutral pH type, is characterized by the outer smectite zone of a lower temperature, and the inner mixed layer minerals zone of a higher temperature. Quartz vein‐related or fracture‐controlled alteration, is represented by the occurrence of interstratified illite/smectite and K‐feldspar, suggesting a potassium‐enriched alteration. The mineralization in the Hoshino area is recognized on the surface by the occurrence of gold‐bearing quartz veins distributed mainly in the mixed layer minerals zone. The fracture system related to the gold mineralization is mainly characterized by NW‐SE trend. The alteration pattern and the mineralogical composition of the veins suggest that the mineralizing fluids had near‐neutral pH and the mineralization is of low‐sulfidation‐type. Fluid inclusion data and textures observed in quartz veins indicate that gold precipitated during boiling. The chemical composition of quartz veins shows that high‐grade gold‐bearing quartz veins are characterized by higher content of Al₂O₃, K₂O and Rb. Several outcrops of silica‐sinters are distributed on the top of the mixed layer minerals zone. Although their structures are not very well preserved, because of later silicification, the Hoshino sinters still show characteristic textures identical to those observed in modern sinters, such as the presence of plant fossil incorporated into the sinters, the strongly developed depositional laminations and the columnar structures perpendicular to the depositional surfaces. Quartz is the only silica mineral constituting the Hoshino sinters presently. The conversion of amorphous silica into quartz was probably governed by higher temperatures resulting from later hydrothermal activity. This later hydrothermal activity is reflected by the intense silicification affecting mainly the lower parts of the sinters and also by the presence of quartz veins cutting the sinters. The distribution of sinters in the Hoshino area is very significant. The presence beneath the sinters of concealed high‐grade gold‐bearing quartz veins should be highly considered and exploration work is strongly suggested.     

公婆泉盆地局部排泄源氧化还原属性与铀矿化关系探讨

在系统分析公婆泉盆地地质背景、水文地质条件的基础上，对该区局部排泄源氧化还原属性与铀矿化的关系进行了探讨。研究结果表明，局部排泄源的存在对铀矿化具有重要作用，当局部排泄源属于还原性质时，铀矿体常常分布于该排泄源上游；若属氧化性质，排泄源铀矿体通常位于其下游或附近。公婆泉盆地存在相对氧化和相对还原的二种局部排泄源，北骆驼泉区的沙泉沟与平沙地、麻黄沟、北骆驼泉沟排泄源之间应为有利的铀矿化地段。     

Fluid flow and mineralization of Youjiang Basin in the Yunnan-Guizhou-Guangxi area, China

Comprehensive studies, based on isotope geochemistry of C, H, O, S and Sr, chronology, common element and trace element geochemistry of fluid inclusions for the epithermal Au, As, Sb and Hg deposits in the Youjiang Basin and its peripheral areas, suggested that the ore fluid was the basin fluid with abundant metallic elements and the large-scale fluid flow of the same source in the late Yenshan stage was responsible for huge epithermal mineralization and silicification. The ore fluid flowed from the basin to the platform between the basin and the platform and migrated from the inter-platform basin to the isolated platform in the Youjiang Basin. The synsedimentary faults and paleokast surface acted respectively as main conduits for vertical and lateral fluid flow.     

Timing of deformation in the Norseman-Wiluna Belt, Yilgarn Craton, Western Australia

Establishing relative and absolute time frameworks for the sedimentary, magmatic, tectonic and gold mineralisation events in the Norseman-Wiluna Belt of the Archean Yilgarn Craton of Western Australia, has long been the main aim of research efforts. Recently published constraints on the timing of sedimentation and absolute granite ages have emphasized the shortcomings of the established rationale used for interpreting the timing of deformation events. In this paper the assumptions underlying this rationale are scrutinized, and it is shown that they are the source of significant misinterpretations. A revised time chart for the deformation events of the belt is established. The first shortening phase to affect the belt, D₁, was preceded by an extensional event D_1e and accompanied by a change from volcanic-dominated to plutonic-dominated magmatism at approximately 2685–2675 Ma. Later extension (D_2e) controlled deposition of the ca 2655 Ma Kurrawang Sequence and was followed by D₂, a major shortening event, which folded this sequence. D₂ must therefore have started after 2655 Ma—at least 20 Ma later than previously thought and after the voluminous 2670–2655 Ma high-Ca granite intrusion. Younger transcurrent deformation, D₃–D₄, waned at around 2630 Ma, suggesting that the crustal shortening deformation cycle D₂–D₄ lasted approximately 20–30 Ma, contemporaneous with low-volume 2650–2630 Ma low-Ca granites and alkaline intrusions. Time constraints on gold deposits suggest a late mineralisation event between 2640–2630 Ma. Thus, D₂–D₄ deformation cycle and late felsic magmatism define a 20–30 Ma long tectonothermal event, which culminated with gold mineralisation. The finding that D₂ folding took place after voluminous high-Ca granite intrusion led to research into the role of competent bodies during folding by means of numerical models. Results suggest that buoyancy-driven doming of pre-tectonic competent bodies trigger growth of antiforms, whereas non-buoyant, competent granite bodies trigger growth of synforms. The conspicuous presence of pre-folding granites in the cores of anticlines may be a result from active buoyancy doming during folding.