江西省小龙钨矿深部地球化学找矿远景预测

运用岩石地球化学找矿方法预测了小龙钨矿区深部Ｃｕ、Ａｇ、Ｗ矿化富集规律及其找矿远景。认为矿区南涪７、１１勘探线八中段以下存在Ｃｕ、Ａｇ、Ｗ矿体可能;北部０勘探线六中段Ｃｕ、Ａｇ晕已收敛,深部存在Ｃｕ、Ａｇ矿体可能性不大,而Ｗ的强度和规模在八中段以下呈显著增大趋势,深部可能存在Ｗ矿体,为矿区深部部署坑道工程提供了准确的地球化学依据。     

西藏首例云英岩型钨矿——甲岗雪山W-Mo多金属矿床地质特征研究

甲岗雪山W-Mo多金属矿床位于西藏自治区申扎县境内,地处冈底斯北部,成矿时代为中新世。矿床与矿区内的二长花岗岩体时空关系紧密,矿区内的围岩蚀变普遍见云英岩化,并且云英岩化强烈的地方多伴随强烈的钨钼矿化;矿体的类型以云英岩型为主,还有少量石英脉型,矿石又多呈细脉状或浸染状赋存于云英岩或云英岩化二长花岗岩体内部,证实了矿床的成因类型为云英岩型。依据野外见到的矿物共生组合、脉体穿切关系等,可将成矿期划分为硅酸盐-氧化物阶段和硫化物阶段。流体包裹体研究表明,甲岗雪山W-Mo多金属矿床主成矿期的成矿流体为中-高温、中-低盐度的流体,从主成矿期的硅酸盐-氧化物阶段演化到硫化物阶段,成矿流体的温度下降明显,盐度也有所下降。     

Fluid Inclusions and Hydrogen,Oxygen, Sulfur Isotopes of Nuri Cu‐W‐Mo Deposit in the Southern Gangdese,Tibet

The Nuri Cu‐W‐Mo deposit is located in the southern subzone of the Cenozoic Gangdese Cu‐Mo metallogenic belt. The intrusive rocks exposed in the Nuri ore district consist of quartz diorite, granodiorite, monzogranite, granite porphyry, quartz diorite porphyrite and granodiorite porphyry, all of which intrude in the Cretaceous strata of the Bima Group. Owing to the intense metasomatism and hydrothermal alteration, carbonate rocks of the Bima Group form stratiform skarn and hornfels. The mineralization at the Nuri deposit is dominated by skarn, quartz vein and porphyry type. Ore minerals are chalcopyrite, pyrite, molybdenite, scheelite, bornite and tetrahedrite, etc. The oxidized orebodies contain malachite and covellite on the surface. The mineralization of the Nuri deposit is divided into skarn stage, retrograde stage, oxide stage, quartz‐polymetallic sulfide stage and quartz‐carbonate stage. Detailed petrographic observation on the fluid inclusions in garnet, scheelite and quartz from the different stages shows that there are four types of primary fluid inclusions: two‐phase aqueous inclusions, daughter mineral‐bearing multiphase inclusions, CO₂‐rich inclusions and single‐phase inclusions. The homogenization temperature of the fluid inclusions are 280°C–386°C (skarn stage), 200°C–340°C (oxide stage), 140°C–375°C (quartz‐polymetallic sulfide stage) and 160°C–280°C (quartz‐carbonate stage), showing a temperature decreasing trend from the skarn stage to the quartz‐carbonate stage. The salinity of the corresponding stages are 2.9%–49.7 wt% (NaCl) equiv., 2.1%–7.2 wt% (NaCl) equiv._, 2.6%–55.8 wt% (NaCl) equiv. and 1.2%–15.3 wt% (NaCl) equiv., respectively. The analyses of CO₂‐rich inclusions suggest that the ore‐forming pressures are 22.1 M Pa–50.4 M Pa, corresponding to the depth of 0.9 km–2.2 km. The Laser Raman spectrum of the inclusions shows the fluid compositions are dominated in H₂O, with some CO₂ and very little CH₄, N₂, etc. δD values of garnet are between ?114.4‰ and ?108.7‰ and δ¹⁸O_H2O between 5.9‰ and 6.7‰; δD of scheelite range from ?103.2‰ to ?101.29‰ and δ¹⁸O_H2O values between 2.17‰ and 4.09‰; δD of quartz between ?110.2‰ and ?92.5‰ and δ¹⁸O_H2O between ?3.5‰ and 4.3‰. The results indicate that the fluid came from a deep magmatic hydrothermal system, and the proportion of meteoric water increased during the migration of original fluid. The δ³⁴S values of sulfides, concentrated in a rage between ?0.32‰ to 2.5‰, show that the sulfur has a homogeneous source with characteristics of magmatic sulfur. The characters of fluid inclusions, combined with hydrogen‐oxygen and sulfur isotopes data, show that the ore‐forming fluids of the Nuri deposit formed by a relatively high temperature, high salinity fluid originated from magma, which mixed with low temperature, low salinity meteoric water during the evolution. The fluid flow through wall carbonate rocks resulted in the formation of layered skarn and generated CO₂ or other gases. During the reaction, the ore‐forming fluid boiled and produced fractures when the pressure exceeded the overburden pressure. Themeteoric water mixed with the ore‐forming fluid along the fractures. The boiling changed the pressure and temperature, oxygen fugacity, physical and chemical conditions of the whole mineralization system. The escape of CO₂ from the fluid by boiling resulted in scheelite precipitation. The fluid mixing and boiling reduced the solubility of metal sulfides and led the precipitation of chalcopyrite, molybdenite, pyrite and other sulfide.     

黑龙江双鸭山地区白钨矿勘查开发的思考

双鸭山铁矿早已被开发利用,而钨矿却被忽略。文章通过对该成矿区典型矿床的地质特征,矿物学特征研究认为,铁矿、钨矿往往处于同一成矿区段,相伴产出,因此在该地区应加强钨矿的勘查力度。在矿床开发方面应统一布局,合理开发利用,达到资源利用最大化。     

一种基于NPA的加权“1 V m”SVM高光谱影像分类算法

根据支持向量机(SVM)的计算理论,结合高光谱影像的数据特点,利用最近点算法(NPA)求两类最优超平面,为每类设立一个合理的权指标,提出了基于NPA的加权“1 V m”SVM算法来实现高光谱遥感影像多分类,降低了计算的复杂度和计算量,提高了SVM高光谱遥感影像分类的可操作性和分类效率。     

地球核幔相互作用的W同位素研究进展

地球核幔相互作用的研究难点在于无法获得实际样品。洋岛玄武岩和溢流玄武岩被认为是地幔柱减压熔融的产物,携带了核幔边界的物质信息,可作为研究地球核幔相互作用的样品。¹⁸²Hf-¹⁸²W同位素体系的特殊化学性质,使W同位素成为研究核幔相互作用的重要工具。本文介绍了W同位素示踪的基本原理,并回顾了核幔相互作用的W同位素研究进展。目前已发表的数据表明,全球洋岛玄武岩具有W元素丰度富集(67×10^-9~855×10^-9)、¹⁸²W同位素亏损(μ¹⁸²W=-0.1~-16.1)的特征,由此推断洋岛玄武岩可能来源于核幔平衡源区。Baffin Bay和Ontong Java Plateau溢流玄武岩则具有¹⁸²W富集(μ¹⁸²W=23.4)的特征,可能来源于早期地幔源区。洋岛玄武岩和溢流玄武岩的μ¹⁸²W差异可能是由地幔柱头尾异质性引起。此外,引起μ¹⁸²W异常的其他原因可能有：原始地幔源区的隔离保存、后增生薄层物质的部分混入和低效的核幔分异作用等。目前,W同位素的核幔交换机制仍不清楚。

     

华北平原西南部石垄地貌的成因机理与古环境意义

华北平原西南部的石垄地貌位于河北省邯郸市西北10km的黄土台地区,由沿北东方向延伸的1条大石垄和9条小石垄组成。野外调查、测量资料和室内分析数据表明,垄岗状地貌由钙质胶结的古洺河入宁晋泊的河口三角洲分流河道沉积沙体组成,形成于晚更新世晚期的玉木Ⅱ与玉木Ⅲ之间的间冰阶,距今约2.86万年。垄岗上的"V"型裂口是在玉木盛冰期期间,三角洲上的分流河道沙体暴露于气下,在脱水干缩过程中形成的横切裂隙,与泥裂的成因类似。沿分流河道沙体下泄的富含碳酸钙的地下水在此渗出或溢出,形成了裂隙两侧脊状突起和大石垄左侧的分支状钙板堆积体。伴随邯郸断裂在晚更新世末期以来的强烈活动,紫山断块快速隆升,由此阻断了南洺河向东的自然流路,使其在清化附近被迫改为向北流,在大油村汇入洺河干流。邯郸断裂的正向滑动所引起的地层旋转,使得局部地层倾向逆转,由此造成了垄状沙脊整体向北东方向以5°的仰角翘起。     

Sources of Mw 5+ earthquakes in northeastern Italy and western Slovenia: An updated view based on geological and seismological evidence

We present an overview of the seismogenic sources of northeastern Italy and western Slovenia, included in the last version of the Database of Individual Seismogenic Sources (DISS 3.0.2) and a new definition of the geometry of the Montello Source that will be included in the next release of the database. The seismogenic sources included in DISS are active faults capable of generating M_w > 5.5 earthquakes. We describe the method and the data used for their identification and characterization, discuss some implications for the seismic hazard and underline controversial points and open issues.In the Veneto–Friuli area (NE Italy), destructive earthquakes up to M_w 6.6 are generated by thrust faulting along N-dipping structures of the Eastern Southalpine Chain. Thrusting along the mountain front responds to about 2 mm/a of regional convergence, and it is associated with growing anticlines, tilted and uplifted Quaternary palaeolandsurfaces and forced drainage anomalies. In western Slovenia, dextral strike–slip faulting along the NW–SE trending structures of the Idrija Fault System dominates the seismic release. Activity and style of faulting are defined by recent earthquakes (e.g. the M_s 5.7, 1998 Bovec–Krn Mt. and the M_w 5.2, 2004 Kobarid earthquakes), while the related recent morphotectonic imprint is still a debated matter.We reinterpreted a large set of tectonic data and developed a segmentation model for the outermost Eastern Southalpine Chain thrust front. We also proposed the association of the four major shocks of the 1976 Friuli earthquake sequence with individual segments of three major thrust fronts. Although several sub-parallel active strike–slip strands exist in western Slovenia, we were able to positively identify only two segments of the Idrija Fault System. A comparison of the regional GPS velocity with long-term geological slip-rates of the seismogenic sources included in DISS shows that from a quarter to half of the deformation is absorbed along the external alignment of thrust faults in Veneto and western Friuli. The partitioning of the deformation in western Slovenia among the different strike–slip strands could not be quantified.     

Bathymetric mapping and sub-bottom profiling through lake ice with ground-penetrating radar

Bathymetric mapping of lakes with sonar is essentially limited to the ice-free summer months. Recent developments in ground-penetrating radar technology have greatly increased its portability and capabilities for imaging through fresh water. The suitability of a backpack portable ground-penetrating radar (GPR) system for bathymetric mapping of ice-covered Arctic lakes was investigated by performing grid surveys on three lakes with water depths up to 19 m. It was demonstrated that GPR can now be used to quickly produce high quality bathymetric maps and sub-bottom profiles showing sediment type and lacustrine sediment thickness. While water depths were measured with a precision of ±3%, lacustrine sediment thickness measurements (up to 5 m) had an estimated precision of ±15%.