中朝边境天池破火山口湖底地形多波束测深探测

为调查天池破火山口湖的基本参数和湖底地形特征,研究破火山口的内部构造、破火山口的组合样式和垮塌堆积分布,本文采用多波束测深方法,对天池湖底地形进行了探测。探测结果显示:天池最大水深值为373.2m,天池水域边界实测周长为13.44km,天池湖水面面积9.4km~2,天池总蓄水量约为19.88×10~8m~3。天池周边分布4个温泉,温度为7~47℃。根据湖底地形推断,现今的天池破火山口形成于千年大喷发。其后,在天池西侧形成一个喷火口,东侧形成一个熔岩丘。天池湖底存在5个较大的破火山口内壁垮塌堆积区,但在湖底未见熔岩流。天池边缘出露的温泉点对应环状断裂,同时反映深部存在岩浆体。     

风沙流中沙粒浓度分布的实验研究

利用粒子图像测速技术（PIV）,在风洞内对与天然沙接近的石英沙风沙流沙颗粒浓度沿高度分布进行了研究。对 3种不同轴线风速研究结果表明,风沙流中沙粒浓度沿水平方向基本不变,而随高度呈指数衰减,而且其衰减速率与风速密切相关。风速越大,衰减速率越慢;风速越小,衰减速率越快。风沙运动一旦发生时,靠近沙床表面的沙粒浓度随风速变化很小,可以认为趋于稳定,达到最大值。     

东准噶尔蒙西斑岩铜钼矿床脉体特征及其形成机制

蒙西斑岩铜钼矿床位于东准噶尔伊吾县琼河坝花岗岩北侧,以发育细脉、网脉状矿化为特征。脉体类型多样,包括石英脉、石英硫化物脉和硫化物脉等。根据脉体力学成因机制,其又可划分为水压破裂充填脉和构造破裂充填脉。构造破裂充填脉体按破裂形成的位错特征有正断与逆断两种。地表石英脉产状陡立,明显受断裂控制。脉体体积分数统计结果显示流体富集区呈向北缓倾的带状分布于深100～400m范围内,并与矿化富集带有较好的对应关系。脉体富集带内,脉体以共轭形式存在,一组为倾角较小的逆断破裂充填脉,另一组为倾角较大的正断破裂充填脉,他们可能为缓倾逆冲剪切带的次级破裂与充填脉,即富矿带内脉体是沿矿区低角度逆冲断裂次级破裂面充填的。矿区地表及深部(400m以下)脉体以陡立为主,矿化较弱。矿区流体的运移具先沿水压直立破裂往上运移,进入剪切带后沿剪切带次级破裂侧向和向上运移,并在剪切带中富集成矿。低温矿物组合脉体穿切高温矿物组合脉体的特征说明脉体形成过程矿区处于隆升构造环境,这对斑岩铜矿成矿有利。     

Determining the equivalent permeability tensor for fractured rock masses using a stochastic REV approach: Method and application to the field data from Sellafield,UK

A numerical procedure to determine the equivalent permeability tensor of a fractured rock is presented, using a stochastic REV (Representative Elementary Volume) concept that uses multiple realizations of stochastic DFN (Discrete Fracture Network) models. Ten square DFN models are generated using the Monte Carlo simulations of the fracture system based on the data obtained from a site characterization program at Sellafield, Cumbria, UK. Smaller models with varying sizes of from 0.25 m×0.25 m to 10 m×10 m are extracted from the generated DFN models and are used as two-dimensional geometrical models for calculation of equivalent permeability tensor. The DFN models are also rotated in 30º intervals to evaluate the tensor characteristics of calculated directional permeability. Results show that the variance of the calculated permeability values decreases significantly as the side lengths of the DFN models increase, which justifies the existence of a REV. The REV side length found in this analysis is about 5 m and 8 m with 20% and 10% acceptable variations, respectively. The calculated directional permeability values at the REV size have tensor characteristic that is confirmed by a close approximation of an ellipse in a polar plot of the reciprocal of square roots of the directional permeability.

Update and spatial extension of strategic forest inventories using time series remote sensing and modeling

Up-to-date forest inventory information relating the characteristics of managed and natural forests is fundamental to sustainable forest management and required to inform conservation of biodiversity and assess climate change impacts and mitigation opportunities. Strategic forest inventories are difficult to compile over large areas and are often quickly outdated or spatially incomplete as a function of their long production cycle. As a consequence, automated approaches supported by remotely sensed data are increasingly sought to provide exhaustive spatial coverage for a set of core attributes in a timely fashion. The objective of this study was to demonstrate the integration of current remotely-sensed data products and pre-existing jurisdictional inventory data to map four forest attributes of interest (stand age, dominant species, site index, and stem density) for a 55 Mha study region in British Columbia, Canada. First, via image segmentation, spectrally homogenous objects were derived from Landsat surface-reflectance pixel composites. Second, a suite of Landsat-based predictors (e.g., spectral indices, disturbance history, and forest structure) and ancillary variables (e.g., geographic, topographic, and climatic) were derived for these units and used to develop predictive models of target attributes. For the often difficult classification of dominant species, two modelling approaches were compared: (a) a global Random Forests model calibrated with training samples collected over the entire study area, and (b) an ensemble of local models, each calibrated with spatially constrained local samples. Accuracy assessment based upon independent validation samples revealed that the ensemble of local models was more accurate and efficient for species classification, achieving an overall accuracy of 72% for the species which dominate 80% of the forested areas in the province. Results indicated that site index had the highest agreement between predicted and reference (R² = 0.74, %RMSE = 23.1%), followed by stand age (R² = 0.62, %RMSE = 35.6%), and stem density (R² = 0.33, %RMSE = 65.2%). Inventory attributes mapped at the image-derived unit level captured much finer details than traditional polygon-based inventory, yet can be readily reassembled into these larger units for strategic forest planning purposes. Based upon this work, we conclude that in a multi-source forest monitoring program, spatially localized and detailed characterizations enabled by time series of Landsat observations in conjunction with ancillary data can be used to support strategic inventory activities over large areas.     

不规则边界场地中方格法土方工程量的计算

结合方格法计算土方工程量的全过程,介绍了一种不同于传统教材的确定高程权的方法。采用该方法,比较好地解决了不规则边界场地采用方格法计算土方量的难题,对该方法的实际应用具有指导意义。     

无棱镜技术在电厂施工土方量测量中的应用

随着全站仪在测量中的广泛应用,测量的精度有了很大的提高.特别是无棱镜技术的发展,改变了以往的测量手段和方法,提高了工作的效率.土方量测量是施工过程中不可避免的,为此本文介绍无棱镜测量技术在洛河电厂施工过程中测量土方量的应用情况,通过对比实验,我们对无棱镜测量技术工作效率和成果精度以及适用条件进行分析.     

AIEM模型在积雪散射模拟中的应用

 介绍一种基于一阶辐射传输的积雪散射模型。该模型考虑了积雪覆盖地表微波散射的3种回波分量： 雪层表面散射、下垫面散射以及雪层体散射。对于其中2个面散射分量，文章中应用一种新的面散射模型——AIEM取代原有的IEM模型进行处理。最后，使用Michigan大学的实测数据对改进后模型的模拟结果进行验证，并与改进前的模拟结果进行了对比。