一种改进的MODIS影像BRDF辐射校正方法

针时二向性造成的辐射失真，在核驱动模型的基础上提出了一种改进的二向性反射分布模型，并通过时MODIS影像的试验，得到了减弱辐射差异的较好效果，并对试验结果进行了分析和评价。     

应用高光谱遥感数据估算土壤表层水分的研究

土壤水分是土壤的重要组成部分，它在陆地表层和大气之间的物质和能量交换方面扮演着重要角色，寻求快速而准确的方法估算土壤水分具有重要意义。通常，从可见光一近红外对土壤表层水分的估计多是建立在土壤水分与反射率的关系之上的。而在土壤水分含量不高时，土壤水分的增加使土壤光谱反射率在整个波长范围内降低，尤其在760nm，970nm，1190nm，1450nm，1940nm和2950nm等水分吸收波段，而在土壤水分含量较高时，土壤水分的增加会使土壤光谱反射率在某些光谱波段升高。而土壤水分的估计往往是基于土壤水分与土壤水分吸收波段的吸收强度之间的线性关系上，虽然这些经验的方法对于估算某些土壤的表层水分含量是有效的，但这些关系应用于其它条件(如不同种类土壤、土壤湿度变化范围很大的情况)时却面临很多困难，这与土壤的光谱反射率是由土壤的组成成分(土壤水分、有机质、氧化铁和粘土矿物等)的含量和它们在土壤中的分布密切相关。微分技术处理“连续”的光谱是遥感中常用的数学方法，微分技术能部分消除低频光谱成分的影响。现在微分光谱已广泛地应用于研究植被的生物物理参数、矿物和有机质等。然而利用微分光谱对土壤水分反演的研究却鲜见报道。本文通过对实验室中多种不同类型的土壤进行光谱与土壤表层水分含量进行观测，探讨了通过土壤反射率与微分光谱对土壤表层水分的反演方法。4种类型的土壤光谱数据(反射率(R)，反射率倒数的对数(log(1／R))，反射率的一阶微分光谱(dR／dλ)，反射率倒数的对数的一阶微分光谱(d(log(1／R))／dλ))与土壤表层水分之间的关系在本文中得到分析，R与log(1／R)对于不同土壤类型与土壤表层水分都很敏感，说明通过R与log(1／R)反演土壤表层水分受土壤类型的影响很大，而dR／dλ，d(log(1／R))／dλ)对土壤类型却不敏感，对土壤表层水分较为敏感，说明dR／dλ和d(log(1／R))／dλ)对于反演不同类型土壤具有很大的潜力，微分光谱与土壤水分在某些波段具有显著的相关性。通过随机对9种土壤(各具有4个土壤水分)的数据建立反演土壤水分的模型，并其他9种土壤(各具有4个土壤水分)的数据进行验证模型，结果表明，dR／dλ和d(log(1／R))／dλ)能够显著提高R与log(1／R)对于不同土壤类型土壤表层水分的反演精度，由于吸收过程是非线性的，在四种类型的土壤光谱数据中，总体来说，d(log(1／R))／dλ)具有最好的能力预测不同类型土壤的表层水分含量。     

利用可见光/近红外反射光谱估算土壤总氮含量的实验研究

利用土壤的室内反射率光谱，探讨土壤氮元素的高光谱机理。利用土壤光谱各吸收带的特征参数与总氮含量进行逐步回归运算，确定与氮元素关系比较密切的几个吸收带。计算出这几个特征吸收带内土壤反射率的变化形式：一阶导数(FDR)、倒数(1/R)、倒数之对数(log(1/R))、波段深度(Depth)，并与总氮含量进行逐步回归分析，得到比较理想的结果：建模样本的Ra^2(修正的判定系数)分别为0．789、0．753、0．736、0．699，验证样本的Ra^2分别为0．759、0．468、0．794、0．725。可见土壤的反射率光谱与氮元素含量之间存在比较明显的相关性，可见光／近红外反射光谱具有快速估算土壤中氮元素含量的潜力。     

Reflectance spectroscopic characterisation of mineral alteration footprints associated with sediment-hosted gold mineralisation at Mt Olympus (Ashburton Basin,Western Australia)

Hydrothermal ore deposits are typically characterised by footprints of zoned mineral assemblages that extend far beyond the size of the orebody. Understanding the mineral assemblages and spatial extent of these hydrothermal footprints is crucial for successful exploration, but is commonly hindered by the impact of regolith processes on the Earth's surface. Hyperspectral drill core (HyLogger?-3) data were used to characterise alteration mineralogy at the Mt Olympus gold deposit located 35 km southeast of Paraburdoo along the Nanjilgardy Fault within the northern margin of the Ashburton Basin in Western Australia. Mineralogy interpreted from hyperspectral data over the visible to shortwave (400–2500 nm) and thermal (6000–14500 nm) infrared wavelength ranges was validated with X-ray diffraction and geochemical analyses. Spaceborne multispectral (ASTER) and airborne geophysical (airborne electromagnetic, AEM) data were evaluated for mapping mineral footprints at the surface and sub-surface. At the deposit scale, mineral alteration patterns were identified by comparing the most abundant mineral groups detected in the HyLogger data against lithology logging and gold assays. Potential hydrothermal alteration phases included Na/K-alunite, kaolin phases (kaolinite, dickite), pyrophyllite, white mica, chlorite and quartz, representing low-T alteration of earlier greenschist metamorphosed sediments. The respective zoned mineral footprints varied depending on the type of sedimentary host rock. Siltstones were mainly characterised by widespread white-mica alteration with proximal kaolinite alteration or quartz veining. Sandstones showed (1) distal white mica, intermediate dickite, and proximal alunite + kaolinite or (2) widespread white-mica alteration with associated intervals of kaolinite. In both, sandstones and siltstones, chlorite was distal to gold mineralisation. Conglomerates showed distal kaolinite/dickite and proximal white-mica/dickite alteration. Three-dimensional visualisation of the gold distribution and spatially associated alteration patterns around Mt Olympus revealed three distinct categories: (1) several irregular, poddy, SE-plunging zones of >0.5 ppm gold intersected by the Zoe Fault; (2) sulfate alteration proximal to mineralisation, particularly on the northern side of the Mt Olympus open pit; and (3) varying Al^IVAl^VISi^IV_–1(Mg,Fe)^VI_–1 composition of white micas with proximity to gold mineralisation. Chlorite that developed during regional metamorphic or later hydrothermal alteration occurs distal to gold mineralisation. ASTER mineral mapping products, such as the MgOH Group Content used to map chlorite (±white mica) assemblages, showed evidence of correlation to mapped, local structural features and unknown structural or lithological contacts as indicated by inversion modelling of AEM data.     

Determination of the factors governing soil erodibility using hyperspectral visible and near-infrared reflectance spectroscopy

Soil erodibility, which is difficult to estimate and upscaling, was determined in this study using multiple spectral models of soil properties (soil organic matter (SOM), water-stable aggregates (WSA) > 0.25 mm, the geometric mean radius (D_g)). Herein, the soil erodibility indicators were calculated, and soil properties were quantitatively analyzed based on laboratory simulation experiments involving two selected contrasting soils. In addition, continuous wavelet transformation was applied to the reflectance spectra (350–2500 nm) of 65 soil samples from the study area. To build the relationship, the soil properties that control erodibility were identified prior to the spectral analysis. In this study, the SOM, D_g and WSA >0.25 mm were selected to represent the most significant soil properties controlling erodibility and describe the erodibility indicator based on a logarithmic regression model as a function of SOM or WSA > 0.25 mm. Five, six and three wavelet features were observed to calibrate the estimated soil properties model, and the best performance was obtained with a combination feature regression model for SOM (R² = 0.86, p < 0.01), D_g (R² = 0.79, p < 0.01) and WSA >0.25 mm (R² = 0.61, p < 0.01), respectively. One part of the wavelet features captured amplitude variations in the broad shape of the reflectance spectra, and another part captured variations in the shape and depth of the soil dry substances. The wavelet features for the validated dataset used to predict the SOM, WSA >0.25 mm and D_g were not significantly different compared with the calibrated dataset. The synthesized spectral models of soil properties, and the formation of a new equation for soil erodibility transformed from the spectral models of soil properties are presented in this study. These results show that a spectral analytical approach can be applied to complex datasets and provide new insights into emerging dynamic variation with erodibility estimation.     

Re-parameterization of a quasi-analytical algorithm for colored dissolved organic matter dominant inland waters

Quasi-Analytical Algorithms (QAAs) are based on radiative transfer equations and have been used to derive inherent optical properties (IOPs) from the above surface remote sensing reflectance (R_rs) in aquatic systems in which phytoplankton is the dominant optically active constituents (OACs). However, Colored Dissolved Organic Matter (CDOM) and Non Algal Particles (NAP) can also be dominant OACs in water bodies and till now a QAA has not been parametrized for these aquatic systems. In this study, we compared the performance of three widely used QAAs in two CDOM dominated aquatic systems which were unsuccessful in retrieving the spectral shape of IOPS and produced minimum errors of 350% for the total absorption coefficient (a), 39% for colored dissolved matter absorption coefficient (a_CDM) and 7566.33% for phytoplankton absorption coefficient (a_phy). We re-parameterized a QAA for CDOM dominated (hereafter QAA_CDOM) waters which was able to not only achieve the spectral shape of the OACs absorption coefficients but also brought the error magnitude to a reasonable level. The average errors found for the 400–750 nm range were 30.71 and 14.51 for a, 14.89 and 8.95 for a_CDM and 25.90 and 29.76 for a_phy in Funil and Itumbiara Reservoirs, Brazil respectively. Although QAA_CDOM showed significant promise for retrieving IOPs in CDOM dominated waters, results indicated further tuning is needed in the estimation of a(λ) and a_phy(λ). Successful retrieval of the absorption coefficients by QAA_CDOM would be very useful in monitoring the spatio-temporal variability of IOPS in CDOM dominated waters.     

Hyperspectral feature analysis of chlorophyll a and suspended solids using field measurements from Taihu Lake,eastern China

Abstract

We report results of three field campaigns conducted at 39 stations. At each station, we measured reflectance spectra in situ and collected water samples for measuring chlorophyll a (CHL) and suspended solids (SS) concentrations in the laboratory. To identify the indicative bands and develop suitable estimation models for CHL (C _CHL) and SS (C _SS) concentrations in Taihu Lake, a spectral-feature method and a derivative method were applied. The following conclusions were drawn: (a) the critical C _CHL and C _SS probably causing their spectral variation are, respectively: 0, 10, 50 and 75 μg L^?1, and 0, 10, 50 and 100 mg L^?1; (b) the derivative method is better than the spectral-feature method for estimating C _CHL and C _SS; (c) the optimal variable for CHL is a reflectance second-order derivative at 501 nm or a reflectance first-order derivative at 698 nm; the optimal variable for SS can change when its concentration is low and the range is narrow; otherwise, the optimal variable is a reflectance first-order derivative at 878 nm; and (d) the CHL and SS have an effect on one another's retrieval. The C _CHL estimation accuracy would benefit from narrowing the C _SS range. With C _CHL increasing and its range broadening, the corresponding C _SS estimation accuracy decreases gradually.     

徐湾—石头岗花岗闪长岩体对围岩的热影响

对徐海—石头岗花岗闪长岩体围岩中黑云母及有机质变质程度的研究发现:距岩体580m范围内的接触带岩石皆具有角岩化现象。黑云母含量受原岩成分影响,其鳞片粒径与岩体距离密切有关。围岩中镜质组反射率,(R_(mas))值与岩体距离之间有十分明显的规律。     

Contact-metamorphic effect on parameters for kerogen maturation

This study examines the effect of contact metamorphism by an igneous dyke on parameters for kerogen maturation, such as elemental composition (H/C, O/C, N/C), ¹H-NMR T₁, vitrinite reflectance and infrared spectra. Although elemental composition and ¹H-NMR T₁ of the kerogen changed only within 1.5 and 5.0 m from the dyke respectively, vitrinite reflectance of the kerogen was thermally affected beyond 10.0 m from the intrusion. It is concluded that vitrinite reflectance is the most sensitive of the parameters evaluated to assess thermal stress of kerogens.     

Physical and chemical environments of abnormal vitrinite reflectance evolution in the sedimentary basins

Based on the tested data of pressure and vitrinite reflectance of some wells in sedimentary basins, abnormal high pressure is regarded as not the only factor to retard the increase of vitrinite reflectance (R _o). Apart from the types of the organic matter, the physical environment (temperature and pressure) and chemical environment (fluid composition and inorganic elements) will result in the abnormal vitrinite reflectance values in the sedimentary basins. This paper tested trace elements and vitrinite reflectance data from the the abnormal high pressure and normal pressure strata profiles, respectively, and found that the acidic and lower salinity starta are favorable for the increase of R _o. By discussing the corresponding relationship between the contents of some trace elements in the mudstone and the vitrinite reflectance values, the typical trace elements were found to suppress and/or catalyze the vitrinite reflectance of organic matter, while the elements of Ca, Mn, Sr, B, Ba and P may result in the retardation of R _o. However, elements of Fe, Co, Zn, Ni and Rb may catalyze the organic matter maturation. This study is conductive to the organic maturation correction, oil and gas assessment and thermal history reconstruction by the paleothermometry. Translated from Acta Geologica Sinica, 2006, 80(11): 1760–1769 [译自: 地质学报]