Approximate traveltime inversion in downhole microseismic monitoring

In downhole microseismic monitoring, accurate event location relies on the accuracy of the velocity model. The model can be estimated along with event locations. Anisotropic models are important to get accurate event locations. Taking anisotropy into account makes it possible to use additional data – two S-wave arrivals generated due to shear-wave splitting. However, anisotropic ray tracing requires iterative procedures for computing group velocities, which may become unstable around caustics. As a result, anisotropic kinematic inversion may become time consuming. In this paper, we explore the idea of using simplified ray tracing to locate events and estimate medium parameters. In the simplified ray-tracing algorithm, the group velocity is assumed to be equal to phase velocity in both magnitude and direction. This assumption makes the ray-tracing algorithm five times faster compared to ray tracing based on exact equations. We present a set of tests showing that given perforation-shot data, one can use inversion based on simplified ray-tracing even for moderate-to-strong anisotropic models. When there are no perforation shots, event-location errors may become too large for moderately anisotropic media.     

利用剪切波分裂研究青藏高原东北缘及东南缘上地幔各向异性

利用从IRIS上下载的青藏高原东北缘238个台站以及中国地震科学探测台阵喜马拉雅一期350个台站记录到的远震波形数据,通过采用剪切波分裂方法,获取各个台站下方各向异性分裂参数——快波偏振方向（φ）和分裂时差（δt）,从而得到青藏高原东北缘、东南缘上地幔的各向异性特征。研究结果表明,祁连块体、阿拉善块体和鄂尔多斯块体北部,快波方向为NNW-SSE,明显不同于GPS测量得到的近NE-SW的地表位移场方向,延迟时间平均~0.85 s;羌塘块体以及松潘-甘孜褶皱带的西部,快波方向呈现沿顺时针方向旋转的趋势,并且与GPS测量得到的地表位移场方向一致,延迟时间平均为~1.24 s;松潘-甘孜褶皱带东部、秦岭造山带与鄂尔多斯块体南部的交界处,快波方向呈现无序分布,与GPS方向表现出不一致的分布,延迟时间平均~1.08 s;川滇块体北部,快波方向近似N-S方向,与GPS测量得到的地表位移场方向相同,平均延迟时间为~0.925 s;位于北纬26°以南的川滇块体南部,快波方向近E-W方向分布,明显不同于GPS地表位移场方向,平均延迟时间~1.065 s。综合分析推测,羌塘块体、松潘-甘孜褶皱带的西部以及川滇块体北部,地表形变和深部之间的变形是相互耦合的;祁连块体、阿拉善块体和鄂尔多斯块体北部,松潘-甘孜褶皱带东部、秦岭造山带与鄂尔多斯块体南部的交界处以及川滇块体南部,壳幔之间可能存在解耦现象。     

Characterisation and multifaceted anisotropy assessment of Corvio sandstone for geological CO2 storage studies

We present a comprehensive characterisation of the physical, mineralogical, geomechanical, geophysical, and hydrodynamic properties of Corvio sandstone. This information, together with a detailed assessment of anisotropy, is needed to establish Corvio sandstone as a useful laboratory rock‐testing standard for well‐constrained studies of thermo–hydro–mechanical–chemical coupled phenomena associated with CO₂ storage practices and for geological reservoir studies in general. More than 200 core plugs of Corvio sandstone (38.1 and 50 mm diameters, 2:1 length‐to‐diameter ratio) were used in this characterisation study, with a rock porosity of 21.7 ± 1.2%, dry density 2036 ± 32 kg m^?3, and unconfined compressive and tensile strengths of 41 ± 3.28 and 2.3 ± 0.14 MPa, respectively. Geomechanical tests show that the rock behaves elastically between ～10 and ～18 MPa under unconfined conditions with associated Young's modulus and Poisson's ratio of 11.8 ± 2.8 GPa and 0.34 ± 0.01 GPa, respectively. Permeability abruptly decreases with confining pressure up to ～10 MPa and then stabilises at ～1 mD. Ultrasonic P‐ and S‐wave velocities vary from about 2.8–3.8 km s^?1 and 1.5–2.4 km s^?1, respectively, over confining and differential pressures between 0.1 and 35 MPa, allowing derivation of associated dynamic elastic moduli. Anisotropy was investigated using oriented core plugs for electrical resistivity, elastic wave velocity and attenuation, permeability, and tracer injection tests. Corvio sandstone shows weak transverse isotropy (symmetry axis normal to bedding) of <10% for velocity and <20% for attenuation.     

节理岩体超声测试及单轴压缩试验研究

为了获取节理岩体各向异性力学特性和声波传播规律的相互关系,通过制作圆柱形单一预制贯通节理试件,开展了7种不同倾角节理试件的超声波波速测试和单轴压缩试验。试验结果表明：（1）节理试件波速测试值离散性较大,但总体服从正态分布,波速平均值介于石膏试件和完整试件之间,波速随节理倾角增大呈线性递减;（2）不同倾角的节理面对节理试件力学特性的影响很大,在应力-应变关系、变形特征、强度特征和破坏模式上均表现出显著的各向异性特征;（3）节理试件的力学性质和超声波传播特性变化规律区别很大,采用超声波波速确定节理试件的力学参数会存在很大误差。     

碳酸盐岩地区电磁波场的特性分析

形成岩溶的高阻碳酸盐岩对电磁波的吸收较弱，而且成层沉积的特定环境使碳酸盐岩地区岩石的各向异性现象较明显，由于地空界面的存在及岩溶洞壁两侧介质电性差异明显，界面清晰，又使电磁波出现强烈的反射及散射现象，从理论上对碳酸盐岩地区电磁波传播的特有现象进行了研究和分析，并给出结论。     

岩土材料的各向异性强度准则

岩土材料的强度往往表现出很强的各向异性,而已有的各向同性强度准则不能够描述这一特性。提出一个岩土材料的各向异性强度准则。为了描述材料的各向异性,引入了一个由应力张量和组构张量的联合不变量表达的各向异性参数。该参数可以描述加载方向和材料组构方向的夹角。强度准则是基于材料在子午面和偏平面上的破坏特性而建立的,这为描述广义的材料强度各向异性提供了方便。与原各向同性强度准则相比,各向异性强度准则只引入了两个新的模型参数,而且所有的模型参数都可以通过常规的室内试验结果确定。该准则的预测结果与砂土、黏土、天然黏土和岩石的试验结果比较表明,它能够很好地描述岩土材料强度的各向异性     

清溪场地区茅口组裂缝储层预测

茅口组储层以生屑灰岩储层为主,储集空间主要为溶孔、裂缝。这里运用P波振幅方位各向异性分析方法,对清溪场构造茅口组储层开展裂缝预测,搞清了裂缝发育与地层岩性以及构造发育之间的关系,明确了裂缝的走向、强度,以及密度发育部位,预测了裂缝的分布范围。实际资料应用表明,用该套方法识别裂缝—溶隙型储层是有效和可靠的,可以检测出有利的裂缝储层发育带。     

Crustal complexity in the Lachlan Orogen revealed from teleseismic receiver functions

There is an ongoing debate about the tectonic evolution of southeast Australia, particularly about the causes and nature of its accretion to a much older Precambrian core to the west. Seismic imaging of the crust can provide useful clues to address this issue. Seismic tomography imaging is a powerful tool often employed to map elastic properties of the Earth's lithosphere, but in most cases does not constrain well the depth of discontinuities such as the Mohorovi?i? (Moho). In this study, an alternative imaging technique known as receiver function (RF) has been employed for seismic stations near Canberra in the Lachlan Orogen to investigate: (i) the shear-wave-velocity profile in the crust and uppermost mantle, (ii) variations in the Moho depth beneath the Lachlan Orogen, and (iii) the nature of the transition between the crust and mantle. A number of styles of RF analyses were conducted: H-K stacking to obtain the best compressional–shear velocity (V _P /V _S) ratio and crustal thickness; nonlinear inversion for the shear-wave-velocity structure and inversion of the observed variations in RFs with back-azimuth to investigate potential dipping of the crustal layers and anisotropy. The thick crust (up to 48 km) and the mostly intermediate nature of the crust?mantle transition in the Lachlan Orogen could be due to the presence of underplating at the base of the crust, and possibly to the existing thick piles of Ordovician mafic rocks present in the mid and lower crust. Results from numerical modelling of RFs at three seismic stations (CAN, CNB and YNG) suggest that the observed variations with back-azimuth could be related to a complex structure beneath these stations with the likelihood of both a dipping Moho and crustal anisotropy. Our analysis reveals crustal thickening to the west beneath CAN station which could be due to slab convergence. The crustal thickening may also be related to the broad Macquarie volcanic arc, which is rooted to the Moho. The crustal anisotropy may arise from a strong N–S structural trend in the eastern Lachlan Orogen and to the preferred crystallographic orientation of seismically anisotropic minerals in the lower and middle crust related to the paleo-Pacific plate convergence.     

Magnetic Characterization of Amphibolites from the Fomopéa Pluton (West Cameroon): Their Implication in the Pan-African Deformation of the Central African Fold Belt

The Fomopea granitic pluton is emplaced in gnessic and amphibolitic basement.These gneissic and amphibolitic basement rocks are represented in the pluton's body as sub-rounded,elongated or stretched xe...