Spatial variation of seismic motion induced by propagation of body waves

Spatial variation of earthquake ground motion is an important phenomenon that cannot be ignored in the design and safety of strategic structures. Several models have been developed to describe this variation using statistical, mathematical or physical approaches. The latter approach is not specific to an event. A recent contribution, which uses such an approach and called complete stochastic deamplification approach (CSDA), was developed [1]. The aim of this paper is to analyze the spatial variation of earthquake motion induced by the propagation of body waves using the CSDA. Coherency functions are evaluated for the cases of SH–SV–P waves propagating through stratified soil. Results obtained show that the variation of the coherency function is not the same for vertical and horizontal components and that the motion is more coherent at depth than at the free surface. In fact, we found that the rate of decrease with frequency and distance is not the same if P–SV waves propagate through stratified soil.     

Sedimentary cycles of trace elements in Salawusu River Valley since 150 ka BP

The paper makes some analyses on 11 trace elements in the Milanggouwan stratigraphical section in the Salawusu River valley, which is regarded as a prototype geology-palaeoclimate record since 150 ka BP. The results show that the content and variation of trace elements has experienced remarkably regular changes in the pace with coarse and fine sedimentary cycles of palaeo-aeolian sands to its overlying fluvio-lacustrine facies or/and palaeosols. The trace elements with chemical properties of relatively active (V, Sr, Cu, Ni, As) and relatively stable (P, Pb, Rb, Mn, Nb, Zr) are a manifestation of the corresponding 27 changeable cycles between peak and valley values, appearing a multi-fiuctuational process line of relative gathering and migration since then. The low numerical value distribution of these two types of trace elements in the aeolian sand facies represents erosion and accumulation under wind force during the cold-dry climate. Whereas their enrichments in both fluvio-lacustrine facies and palaeosols are related to the valley’s special low-lying physiognomic position between the Ordos Plateau and the Loess Plateau under the warm and humid climate conditions. The above relatively migrated and gathered change of the trace elements is the result of 27 climatic cycles of cold-dry and warm-humid, which is probably caused by repeated alternations of winter monsoon and summer monsoon in the Mu Us Sandy Land influenced by the climate vicissitudes in northern hemisphere during glacial and interglacial periods since 150 ka BP.     

Velocity profile of a sand cloud blowing over a gravel surface

Particle dynamic analyzer (PDA) measurement technology was used to study the turbulent characteristics and the variation with height of the mean horizontal (in the downwind direction) and vertical (in the upward direction) particle velocity of a sand cloud blowing over a gravel surface. The results show that the mean horizontal particle velocity of the cloud increases with height, while the mean vertical velocity decreases with height. The variation of the mean horizontal velocity with height is, to some extent, similar to the wind profile that increases logarithmically with height in the turbulent boundary layer. The variation of the mean vertical velocity with height is much more complex than that of the mean horizontal velocity. The increase of the resultant mean velocity with height can be expressed by a modified power function. Particle turbulence in the downwind direction decreases with height, while that in the vertical direction is complex. For fine sands (0.2–0.3 mm and 0.3–0.4 mm), there is a tendency for the particle turbulence to increase with height. In the very near-surface layer (<4 mm), the movement of blown sand particles is very complex due to the rebound of particles on the bed and the interparticle collisions in the air. Wind starts to accelerate particle movement about 4 mm from the surface. The initial rebound on the bed and the interparticle collisions in the air have a profound effect on particle movement below that height, where particle concentration is very high and wind velocity is very low.     

Cyclic tests on large‐scale models of existing bridge piers with rectangular hollow cross‐section

Cyclic tests on two large‐scale models of existing bridge piers with rectangular hollow cross‐section were performed in the ELSA laboratory. The prototype structure is an existing reinforced concrete highway bridge constructed in Austria in 1975. The piers presented several seismic deficiencies and consequently they showed poor hysteretic behaviour and limited deformation capacity as well as undesirable failure modes that do not comply with the requirements of modern codes for seismic‐resistant structures. Experimental data are compared to numerical and empirical predictions. Copyright © 2003 John Wiley & Sons, Ltd.     

论层序地层学与含油气系统在油气勘探中的联系——以鄂尔多斯中生代盆地为例

虽然层序地层学与含油气系统理论的各自研究对象和研究方法不同，但由于层序地层学研究对象(沉积岩)是含油气系统研究对象(油气)的载体，二者可以由含油气盆地分析有机的结合起来。层序地层分析包含了对含油气系统的地质要素及成藏作用载体的分析，因而沉积层序的组成单元与含油气系统的地质要素有必然的联系：在一个沉积盆地的数个沉积层序中，成熟烃源岩往往是地史中具一定埋深、分布广、厚度大、有机质含量高的凝缩层，这个凝缩层往往是一个构造超层序的最大海(湖)泛面；储集岩往往是成熟烃源岩之上层序的低水位体系域或紧邻成熟烃源岩的高水位体系域；有效盖层为储集岩之上层序的水进体系域及凝缩层；成熟烃源岩之上的沉积层序为上覆岩层；低水位体系域储集岩有可能沿上倾方向尖灭，被层序界面及其上层序的水进体系域岩性圈闭；除构造裂缝外，低水位体系域下切谷可作为油气向上运移通道；一个含油气系统往往跨越不同的沉积层序甚至构造超层序。     

上奥陶统底界全球辅助层型剖面在我国的确立

国际奥陶系分会于 1 995年在美国拉斯维加斯召开的第七届国际奥陶系大会上确立了奥陶系的三统六阶划分方案后 ,笔者等即参加了确立上奥陶统底界的国际工作组。这一工作组由 S.M.Bergstrom和 S.C.Finney为主 ,先后考察了美国亚拉巴马州的 Calera剖面 ,中国的新疆柯坪大湾沟剖面 ,中国甘肃平凉官庄剖面和瑞典 Scania的 Fagelsang剖面 ,经过五年的对比研究 ,于 2 0 0 0年确立了瑞典的Fagelsang剖面为上奥陶统底界的全球层型剖面和点位 ( GSSP) ,中国的新疆大湾沟剖面和美国的亚拉巴马的 Calera剖面为上奥陶统底界的两个全球辅助层型剖面 …     

Origin and tectonic significance of a Mesozoic multi-layer over-thrust system within the Yangtze Block (South China)

In the Yangtze Block (South China), a well-developed Mesozoic thrust system extends through the Xuefeng and Wuling mountains in the southeast to the Sichuan basin in the northwest. The system comprises both thin- and thick-skinned thrust units separated by a boundary detachment fault, the Dayin fault. To the northwest, the thin-skinned belt is characterized by either chevron anticlines and box synclines to the northwest or chevron synclines to the southeast. The former structural style displays narrow exposures for the cores of anticlines and wider exposures for the cores of synclines. Thrust detachments occur along Silurian (Fs) and Lower Cambrian (Fc) strata and are dominantly associated with the anticlines. To the southeast, this style of deformation passes gradually into one characterized by chevron synclines with associated principal detachment faults along Silurian (Fs), Cambrian (Fc) and Lower Sinian (Fz) strata. There are, however, numerous secondary back thrusts. Therefore, the thin-skinned belt is like the Valley and Ridge Province of the North American Applachian Mountains. The thick-skinned belt structurally overlies the thin-skinned belt and is characterized by a number of klippen including the Xuefeng and Wuling nappes. It is thus comparable to the Blue Ridge Province of Appalachia.The structural pattern of this thrust system in South China can be explained by a model involving detachment faulting along various stratigraphic layers at different stages of its evolution. The system was developed through a northwest stepwise progression of deformation with the earliest delamination along Lower Sinian strata (Fz). Analyses of balanced geological cross-sections yield about 18.1–21% (total 88 km) shortening for the thin-skinned unit and at least this amount of shortening for the thick-skinned unit. The compressional deformation from southeast to northwest during Late Jurassic to Cretaceous time occurred after the westward progressive collision of the Yangtze Block with the North China Block and suggests that the orogenic event was intracontinental in nature.     

往复荷载作用下矩形钢管混凝土压弯构件承载力计算

本文基于往复荷载作用下矩形钢管混凝土压弯构件的实验结果，比较了国内外比较典型的设计规范(程)，包括英国BS5400(1979)、美国ACI318—99(1999)和AISC-LRFD(1999)、日本AIJ(1997)、欧洲EC4(1994)、中国GJB4142-2000(2001)和福建省地方标准(送审稿)，及本文数值方法在计算往复荷载作用下矩形钢管混凝土压弯构件承载力的差异。结果表明，在进行往复荷载作用下矩形钢管混凝土压弯构件承载力计算时，各种计算方法获得的承载力都偏于安全，其中，数值计算结果与实验结果最接近，GJB4142—2000(2001)的计算结果与实验结果吻合程度稍差，ACI318—99(1999)，EC4(1994)和福建省地方标准(送审稿)的计算结果比实验结果约低20％，而BS5400(1979)、AISC—LRFD(1999)和AIJ(1997)的计算结果比实验结果总体上低30％以上。本文结果可供进行矩形钢管混凝土结构设计时参考。     

利用数字图像处理技术提高地震剖面图像信噪比

提出了利用数字图像处理技术提高地震剖面信噪比的新方法，首先根据数字图像处理要求的格式，对地震剖面数据进行转换，得到地震剖面图像，分析了地震数据特点和初步地震图像的实验结果后，设计了新的预处理方法——“二维沿层滤波”，在此基础上，利用可以计算帧间运动速度及其变化都较大的改进的光流分析技术，计算出多幅地震剖面对应点的偏移量，然后应用图像积累技术对这多幅地震剖面进行积累，实现对三维地震数据体提高信噪比的处理，该方法充分利用了三维地震信息，不但可以提高整个数据体的信噪比，而且可以减少信号能量的损失，并保持原来的信号能量关系，使地震剖面的质量得到明显提高，为地震解释奠定良好的基础。     

Distribution of vertical crustal movement rates in the Tohoku district, Japan, predicted by least-squares collocation

Least-squares prediction using an empirically deduced local covariance function was performed to investigate the temporal change in the rates of vertical crustal movements in the Tohoku district, Japan. Levelling data covering an area of approximately 450 × 275 km² observed between 1966 and 1995 were used and the results shown in the form of contour maps. Firstly we derived a covariance function of the rates of vertical crustal movement with a Gaussian form function. We used this function to estimate the spatial distribution of the rates of vertical crustal movements. By the present method, a steady tilt of the Tohoku district to the east, toward the Japan Trench and an areal uplift in the southwestern part were well reproduced. Moreover, a significant temporal change in vertical movement rates is clearly seen. Received: 15 July 1996