山西临汾盆地黄土剖面重金属分布特征及其影响因素

山西临汾盆地2条黄土剖面重金属分布特征及其影响因素研究表明,Pb、Cu和Zn的垂向变化特征非常相似,而As、Cd和Hg在剖面中的分布特征与前三者不同。各重金属元素在黄土剖面中的变化特征首先均受到黄土源区物质成分的控制,其次不同程度地受到古气候变化的影响。依据Pb、Cu、Zn与各古气候替代性指标(例如磁化率,w(SiO2)/w(Al2O3)等)均呈显著相关,As、Cd和Hg与古气候替代性指标的相关性较差,推断剖面中Cu、Pb、Zn的分布特征受古气候变化的影响,其原因可能主要是这3个金属元素易以类质同象形式赋存在磁性矿物中;而As、Cd和Hg在剖面中的分布特征与古气候无关。但各重金属元素与源区指示元素的相关性表明其在剖面中的分布特征均受黄土源区物质成分的影响和控制。     

大别山黄石-六安反射地震剖面新的地质解释

在大别山黄石至六安反射地震剖面上有很多近水平的反射体,表明大别山中心部位的中、下地壳内也有近水平的分层性。反映有流变性和动力学方面的差异,与大型薄皮构造理论对岩石圈性质的认识一致,因而在其运动过程中应服从薄皮构造的运动规律。结合以往对大别山区划分的岩石一构造组合,在前人对此反射地震剖面所作的地质解释的基础上,对反射地震剖面作了较为详细的地质解释,并建立了大别山造山带在此剖面上的两维几何结构。剖面南部为造山过程中形成的背斜构造。地表15km深度内为由碰撞混杂岩组成的扬子与中一朝大陆之间的主滑脱带。剖面中部为造山期后的侵入体。剖面北部为主滑脱带的根带（通常认为的缝合带）,根带被中生代形成的晓天磨子潭断裂带切割。剖面最北端为变质复理石中略晚于主滑脱带的反向冲断带。推溺l下地壳的断开距离在扬子大陆俯冲时（三叠纪前）规模较大,然后逐渐缩小,直至保留到今天的规模。     

Airborne gamma-ray spectrometry to quantify chemical erosion processes

Airborne gamma-ray spectrometry data (uranium, potassium and thorium contents) reveal geochemical heterogeneities within the monolithological Hyrôme watershed (ca. 150 km²) in the Armorican massif (western France). Our observations and computations provide important constraints on the spatial distribution and the associated magnitudes of chemical erosion processes at the scale of a small watershed. Two distinct, partially preserved, weathering profiles exhibit a strong correlation between regolith evolution and airborne-derived K/Th ratios, suggesting that the variability is linked to supergene processes. Using both airborne data and laboratory measurements on rock samples, the total net export of potassium has been estimated at 422 ± 50 kg/m² and the chemical weathering rate of potassium at 17 ± 2 kg/km²/a.     

Retrieval of stratospheric O3 and NO2 vertical profiles using zenith scattered light observations

Daily zenith scattered light intensity observations were carried out in the morning twilight hours using home-made UV-visible spectrometer over the tropical station Pune (18‡31′, 73‡51′) for the years 2000–2003. These observations are obtained in the spectral range 462–498 nm for the solar zenith angles (SZAs) varying from 87‡ to 91.5‡. An algorithm has been developed to retrieve vertical profiles of ozone (O₃) and nitrogen dioxide (NO₂) from ground-based measurements using the Chahine iteration method. This retrieval method has been checked using measured and recalculated slant column densities (SCDs) and they are found to be well matching. O₃ and NO₂ vertical profiles have been retrieved using a set of their air mass factors (AMFs) and SCDs measured over a range of 87–91.5‡ SZA during the morning. The vertical profiles obtained by this method are compared with Umkehr profiles and ozonesondes and they are found to be in good agreement. The bulk of the column density is found near layer 20–25 km. Daily total column densities (TCDs) of O₃ and NO₂ along with their stratospheric and tropospheric counterparts are derived using their vertical profiles for the period 2000–2003. The total column, stratospheric column and tropospheric column amounts of both trace gases are found to be maximum in summer and minimum in the winter season. Increasing trend is found in column density of NO₂ in stratospheric, tropospheric and surface layers, but no trend is observed in O₃ columns for above layers during the period 2000–2003     

Vertical distribution and water solubility of phosphorus and heavy metals in sediments of the St. Lucie Estuary, South Florida, USA

Accumulation and distribution of heavy metals and phosphorus in sediments impact water quality. There has been an increasing concern regarding fish health in the St. Lucie Estuary, which is related to increased inputs of nutrients and metals in recent decades. To investigate vertical changes of contaminants (P, Cd, Cr, Co, Cu, Ni, Pb, Zn, and Mn) in sediments of the St. Lucie Estuary in South Florida, 117 layer samples from six of the 210 to 420 cm depth cores were analyzed for their total and water-soluble P and heavy metals, clay, total Fe, Al, K, Ca, Mg, Na, and pH. Principal component analysis (PCA) was used in two sets of analytical data (total and water-soluble contaminant concentrations) to document changes of contaminants in each core of sediments. The PCA of total contaminants and minerals resulted in two factors (principal components). The first and second factors accounted for 61.7 and 17.2 % of the total variation in all variables, and contrast indicators associated with contaminants of P, Cd, Co, Cr, Ni, Pb, Zn, and Mn and accumulation of Fe and Al oxides, respectively. The first factor could be used for overall assessment of P and heavy metal contamination, and was higher in the upper 45–90 cm than the lower depths of each core. The concentrations of P and heavy metals in the surface layers of sediments significantly increased, as compared with those in the sediments deeper than 45–90 cm. The PCA of water-soluble contaminants developed two factors. The second factor (Cu–P) was higher in the upper than the lower depths of the sediment, whereas the highest score of the first factor (Cd–Co–Cr–Ni–Pb–Zn–Mn) occurred below 100 cm. The water-soluble Cu and P concentrations were mainly dependent on their total concentrations in the sediments, whereas the water-soluble Cd, Co, Cr, Ni, Pb, Zn, and Mn concentrations were mainly controlled by pH.     

青藏高原近地面层微气象学特征

利用1998年5月-7月在改则、当雄和昌都三测站获得的近地面层气象要素变化的观测资料，分析了青藏高原近地面层风速、温度和湿度日变化特征及廓线规律，发现高原近地面层微气象学特征具有自己的特点；同时还讨论了高原近地面层白天出现的逆湿现象。     

非海相沉积层序的成因和构型特征

根据东部盆地的地质、地球物理特征,初步对非海相层序地层学应用研究进行了总结.非海相沉积层序的形成要素,既有外旋回、又有自旋回,构造和气候因素很重要,强调了环境因素.沉积基准面在海上为海平面,在陆上为潜水面、湖平面、河流平衡剖面.相对基准面的周期性变化引起了可容纳空间的周期性变化,并由之形成了一系列旋回式的层序.大多数情况下内陆基准面的变化不受海平面变化的控制,在全球最大海泛期有某种联系.湖盆小而沉积速率高,形成层序的频率高于海相.以沾化凹陷为依据,提出了5种层序构型特征:冲积-河湖型,(半)盐湖-淡水湖泊过渡型,海流-深湖型,半深湖-缓坡型,河流-冲积平原型.在盆地主要发育期,断阶式坡折对沉积体系有明显的控制作用.除低水位扇外,低水位楔是构成隐蔽圈闭或复合圈闭的有利场所。     

Horizontal and vertical components of earthquake ground motions at liquefiable sites

Field observations on ground motions from recent earthquakes imply that current knowledge is limited with regard to relating vertical and horizontal motions at liquefiable sites. This paper describes a study with the purpose of clarifying this emerging issue to some extent. A series of numerical analyses is carried out on a liquefiable soil deposit with a verified, fully coupled, nonlinear procedure. It is shown that the transformation of vertical motions in the deposit differs considerably from the transformation of horizontal motions. Both the amplitude and frequency content of the horizontal motions are strongly dependent on the shaking level or the associated nonlinear soil behavior. The transfer function for vertical motions is however likely to be independent of the intensity of input motions; no reduction in the amplitude occurs even in the case of strong shaking. The results are shown to be in consistence with the laboratory observations on shaking table tests and recent field observations that less nonlinearity exists for vertical motions. It is also shown that the possibility exists for using information on spectral ratios between the horizontal and vertical surface motions to quickly identify in situ soil behavior and liquefaction that are not readily covered by conventional field or laboratory experimentation procedures.     

Computational modeling of cyclic mobility and post-liquefaction site response

Under seismic excitation, liquefied clean medium to dense cohesionless soils may regain a high level of shear resistance at large shear strain excursions. This pattern of response, known as a form of cyclic mobility, has been documented by a large body of laboratory sample tests and centrifuge experiments. A plasticity-based constitutive model is developed with emphasis on simulating the cyclic mobility response mechanism and associated pattern of shear strain accumulation. This constitutive model is incorporated into a two-phase (solid–fluid), fully coupled finite element code. Calibration of the constitutive model is described, based on a unique set of laboratory triaxial tests (monotonic and cyclic) and dynamic centrifuge experiments. In this experimental series, Nevada sand at a relative density of about 40% is employed. The calibration effort focused on reproducing the salient characteristics of dynamic site response as dictated by the cyclic mobility mechanism. Finally, using the calibrated model, a numerical simulation is conducted to highlight the effect of excitation frequency content on post-liquefaction ground deformations.     

Spatial variation of seismic motion induced by propagation of body waves

Spatial variation of earthquake ground motion is an important phenomenon that cannot be ignored in the design and safety of strategic structures. Several models have been developed to describe this variation using statistical, mathematical or physical approaches. The latter approach is not specific to an event. A recent contribution, which uses such an approach and called complete stochastic deamplification approach (CSDA), was developed [1]. The aim of this paper is to analyze the spatial variation of earthquake motion induced by the propagation of body waves using the CSDA. Coherency functions are evaluated for the cases of SH–SV–P waves propagating through stratified soil. Results obtained show that the variation of the coherency function is not the same for vertical and horizontal components and that the motion is more coherent at depth than at the free surface. In fact, we found that the rate of decrease with frequency and distance is not the same if P–SV waves propagate through stratified soil.