高液限土路堤填筑的双指标控制方法研究

对于高液限土（包括改良的高液限土）填筑的路堤只用单一的压实度指标控制常常易导致质量隐患。通过试验研究提出一个采用空气率Va和压实度Dc双指标控制高液限土路堤填筑质量的方法,并给出了具体的控制标准。当压实度控制指标Dc≥93%时,高液限黏土和粉土空气率控制标准为4%≤Va≤8%,含砂高液限黏土和粉土空气率控制标准为6%≤Va≤13%。通过系统的试验研究,验证了双指标质量控制的可行性和有效性。研究结果表明,采用空气率和压实度双指标控制,不仅可以保证高液限土填筑路堤的强度和刚度,而且具有较好的水稳定性,为进一步充分利用高液限土作为路堤填料提供了技术支持。     

Late Paleozoic tectonic evolution in northern Korean Peninsula

Since Late Proterozoic era, the Korean Peninsula has been evolved into a state with relatively stable regions and orogenic belts which were developed differently each other. The Late Paleozoie （Late Carboniferous-Early Triassic） sediments are well developed in the Korean Peninsula, and called the Pyongan System. The Pyongan System from Late Carboniferous to Lower Triassic is distributed in the Pyongnan and Hyesan-Riwon Basins, and Rangrim Massif, and divided into Hongjom （ C2 ）, Ripsok （ C2 ）, Sadong （ C2-P1 ）, Kobangsan and Rokam （Taezhawon） （P2-T1） sequences. The sediments of the Tumangang Orogenic Belt are called Tuman System which is composed of the Amgi Series, consisting of elastic formation with mafic effusive material, overlaid by the Kyeryongsan Series, consisting mainly of marie volcano sediments. The Songsang Series which rests on the Kyeryongsan Series mainly consists of elastic formation with minor felsic effusive material. In the Tumangang Orogenic Belt the tectonic movement, called Tumangang Tectonic Movement, occurred in the Lower Permian-Lower Triassic.     

Biofacies of Upper Jurassic and Lower Cretaceous sediments of central West Siberia

Paleontological study of Upper Jurassic and Lower Cretaceous sediments recovered by boreholes in the Agan-Vakh and Nadym-Vengapur interfluves clarified environments of their deposition. As is shown, influx of siliciclastic material to central areas of the West Siberian sea basin varied through time. Taxonomic composition and ecological structure of nektonic and benthic fossil assemblages are analyzed and considered in terms of environmental factors such as hydrodynamics, aeration, temperature, and salinity of seawater.     

Truncation of the distribution of ground-motion residuals

Recent studies to assess very long-term seismic hazard in the USA and in Europe have highlighted the importance of the upper tail of the ground-motion distribution at the very low annual frequencies of exceedance required by these projects. In particular, the use of an unbounded lognormal distribution to represent the aleatory variability of ground motions leads to very high and potentially unphysical estimates of the expected level of shaking. Current practice in seismic hazard analysis consists of truncating the ground-motion distribution at a fixed number (ε _max) of standard deviations (σ). However, there is a general lack of consensus regarding the truncation level to adopt. This paper investigates whether a physical basis for choosing ε _max can be found, by examining records with large positive residuals from the dataset used to derive one of the ground-motion models of the Next Generation Attenuation (NGA) project. In particular, interpretations of the selected records in terms of causative physical mechanisms are reviewed. This leads to the conclusion that even in well-documented cases, it is not possible to establish a robust correlation between specific physical mechanisms and large values of the residuals, and thus obtain direct physical constraints on ε _max. Alternative approaches based on absolute levels of ground motion and numerical simulations are discussed. However, the choice of ε _max is likely to remain a matter of judgment for the foreseeable future, in view of the large epistemic uncertainties associated with these alternatives. Additional issues arise from the coupling between ε _max and σ, which causes the truncation level in terms of absolute ground motion to be dependent on the predictive equation used. Furthermore, the absolute truncation level implied by ε _max will also be affected if σ is reduced significantly. These factors contribute to rendering a truncation scheme based on a single ε _max value impractical.     

川东北地区上二叠统盘龙洞生物礁成岩作用研究

本文对宣汉盘龙洞上二叠统生物礁古油气藏成岩作用进行了详细的研究。其主要成岩作用类型有胶结作用、新生变形作用、白云岩化作用、去白云岩化作用以及压溶和溶解作用等。根据岩石中胶结物的胶结结构和矿物特征,初步判断该生物礁主要经历了海底成岩环境、大气淡水渗流潜流环境、海水与淡水混合带成岩环境和埋藏成岩环境。该区的白云岩主要是混合白云岩化形成的。值得强调的是,该区白云岩化作用和溶蚀作用对该生物礁岩石孔隙度的增加贡献很大,提供了良好的油气储集空间,这对恢复该生物礁储层孔隙发育历史,以及油气勘探和评价都有很重要的意义。     

Provenance of the Langjiexue Group to the south of the Yarlung-Tsangpo Suture Zone in southeastern Tibet: Insights on the evolution of the Neo-Tethys Ocean in the Late Triassic

ABSTRACT

The Upper Triassic Langjiexue Group, which lies immediately south of the Yarlung-Tsangpo Suture Zone in the Shannan area of southeastern Tibet, represents an important part of the Tethyan Himalayan Sequence (THS). Its provenance and palaeogeography have been the subject of debate. We present new data on petrographic composition, whole-rock geochemistry, and detrital zircon U–Pb geochronology to constrain the provenance of the Langjiexue Group. The dominance of quartz grains and felsic volcanic lithic fragments suggests that the sandstones are litho-quartzose. The trace element geochemical signatures (V–Ni–Th*10, Co/Th–La/Sc, Eu/Eu*–Th/Sc) suggest derivation from felsic igneous sources. The detrital zircon age spectra display three major peaks: a Meso-to-Neoproterozoic peak (1200–900 Ma, 7–18%), a Neoproterozoic-to-Late Cambrian peak (750–500 Ma, 32–65%), and a Late Carboniferous-to-Late Triassic peak (300–200 Ma, 11–33%). The maximum depositional age of early Carnian (236–235 Ma) is obtained by calculating weighted average ages of the youngest zircons (≤250 Ma). The youngest age cluster (300–200 Ma) is incompatible with sources from neighbouring terranes, including the South Qiangtang terrane, Lhasa terrane, THS, and Higher Himalayan Crystalline. Correlations of the Permian–Triassic zircons with those of time-equivalent strata in northwest Australia, west Burma, and the Banda Arc unveil a potential connection to the Tasmanides along the convergent margin of eastern Australia. The New England Orogen (300–230 Ma) could have supplied the Langjiexue Group with magmatic materials via continent-scale drainage systems or a submarine fan complex. This scenario provides a new perspective into the transport of detritus from distal orogens to sedimentary basins thousands of kilometres away.     

华北克拉通中部过渡带SKS波分裂研究:鄂尔多斯东南角的局部软流圈绕流

本文对布设在华北克拉通东西两块体交界区域的宽频带流动地震观测台阵和部分固定台站的远震波形记录开展了SKS波分裂研究.结果显示,鄂尔多斯块体内部的各向异性比较弱,剪切波分裂导致的时间延迟一般小于0.7 s.鄂尔多斯块体东缘的山西断陷带和太行山以及华北平原西部均表现出了比较强的各向异性,时间延迟大于1.0 s.特别是在太行山地区观测到的ENE趋向的快波偏振方向明显不同于鄂尔多斯块体和华北平原地区的近E-W和ESE方向的快波偏振方向.在华北克拉通东西两块体交界过渡带的太行山地区观测到的显著上地幔各向异性及变化可能对应于围绕鄂尔多斯块体东南角的局部软流圈绕流,而后者可能起因于鄂尔多斯块体的逆时针旋转以及青藏高原软流圈沿秦岭大别造山带向东的流动.     

Trace elements in alluvia of the upper Vistula as indicators of palaeohydrology

In the Vistula valley near Góra, at the northern foreland of the Carpathians Mountains, there are young alluvia deposited in the historical period. These alluvia are difficult to date precisely because of the lack of organic interbedded material. In the Vistula drainage basin upstream of Góra since the second half of 18th century small centres of metal, textile, motor, and petrochemical industries have been developed. Concentrations of trace elements such as: Cr, Mn, Co, Ni, Cu, Zn, Cd, Pb, and of some macroelements were used as indicators of the age of different alluvial fills. The main part of the Vistula valley floor was built up by sediment accumulation before the development of industry but after the medieval phase of rural colonization of the Carpathians. Deposits filling the abandoned channels dissecting the valley floor have an increased content of some trace elements and deposits date from the second half of the 18th century, when the first foundries and blacksmith's shops were developed. A drastic increase of concentration of the most abundant trace elements in the youngest alluvial fill indicates that the fill dates from the last decade of rapid industrial development.     

基于GeoStudio的边坡稳定性分析及支护方案选择的理论探讨

本文选择大连市中山区长利巷地区的边坡,通过现场采取岩土样,进行室内试验得出各地层力学物理参数,对边坡进行稳定性分析。针对目前所拥有的模拟软件与方法,分析并筛选出适合该边坡的模拟软件。利用GeoStudio软件建模、模拟,使用Morgenstern-Price方法进行计算,通过分析得到计算结果,该边坡的安全安全系数为1. 127,认为其属于不稳定边坡。对于不稳定边坡,本文对主流的边坡支护方法进行分析筛选,拟采用扶壁式挡土墙支护方案对其进行预防。根据规范设计挡土墙尺寸,并对该挡土墙进行抗倾覆抗滑移验算,得出的验算安全系数满足规范要求,由此可得知该支护方案方法合理,技术可行。     

Facies analysis of the Trypali carbonate unit (Upper Triassic) in central-western Crete (Greece): an evaporite formation transformed into solution-collapse breccias

The Trypali carbonate unit (Upper Triassic), which crops out mainly in central‐western Crete, occurs between the parautochthonous series (Plattenkalk or Talea Ori‐Ida series, e.g. metamorphic Ionian series) and the Tripolis nappe (comprising the Tripolis carbonate series and including a basal Phyllite–Quartzite unit). It consists of interbedded dolomitic layers, represented principally by algally laminated peloidal mudstones, foraminiferal, peloidal and ooidal grainstones, as well as by fine‐grained detrital carbonate layers, in which coarse baroque dolomite crystals and dolomite nodules are dispersed. Baroque dolomite is present as pseudomorphs after evaporite crystals (nodules and rosettes), which grew penecontemporaneously by displacement and/or replacement of the host sediments (sabkha diagenesis). However, portions of the evaporites show evidence of resedimentation. Pre‐existing evaporites predominantly consisted of skeletal halite crystals that formed from fragmentation of pyramidal‐shaped hoppers, as well as of anhydrite nodules and rosettes (salt crusts). All microfacies are characteristic of peritidal depositional environments, such as sabkhas, tidal flats, shallow hypersaline lagoons, tidal bars and/or tidal channels. Along most horizons, the Trypali unit is strongly brecciated. These breccias are of solution‐collapse origin, forming after the removal of evaporite beds. Evaporite‐related diagenetic fabrics show that there was extensive dissolution and replacement of pre‐existing evaporites, which resulted in solution‐collapse of the carbonate beds. Evaporite replacement fabrics, including calcitized and silicified evaporite crystals, are present in cements in the carbonate breccias. Brecciation was a multistage process; it started in the Triassic, but was most active in the Tertiary, in association with uplift and ground‐water flow (telogenetic alteration). During late diagenesis, in zones of intense evaporite leaching and brecciation, solution‐collapse breccias were transformed to rauhwackes. The Trypali carbonate breccias (Trypali unit) are lithologically and texturally similar to the Triassic solution‐collapse breccias of the Ionian zone (continental Greece). The evaporites probably represent a major diapiric injection along the base of the parautochthonous series (metamorphic Ionian series) and also along the overthrust surface separating the parautochthonous series from the Tripolis nappe (Phyllite–Quartzite and Tripolis series). The injected evaporites were subsequently transformed into solution‐collapse breccias.