Depositional evolution of a progradational to aggradational,mixed-influenced deltaic succession: Jurassic Tofte and Ile formations,southern Halten Terrace,offshore Norway

Predicting the hydrodynamics, morphology and evolution of ancient deltaic successions requires the evaluation of the three-dimensional depositional process regime based on sedimentary facies analysis. This has been applied to a core-based subsurface facies analysis of a mixed-energy, clastic coastal-deltaic succession in the Lower-to-Middle Jurassic of the Halten Terrace, offshore mid-Norway. Three genetically related successions with a total thickness of 100–300 m and a total duration of 12.5 Myr comprising eight facies associations record two initial progradational phases and a final aggradational phase. The progradational phases (I and II) consist of coarsening upward successions that pass from prodelta and offshore mudstones (FA1), through delta front and mouth bar sandstones (FA2) and into erosionally based fluvial- (FA3) and marine-influenced (FA4) channel fills. The two progradational phases are interpreted as fluvial- and wave-dominated, tide-influenced deltas. The aggradational phase (III) consists of distributary channel fills (FA3 and FA4), tide-dominated channels (FA5), intertidal to subtidal heterolithic fine-grained sandstones (FA6) and coals (FA7). The aggradational phase displays more complex facies relationships and a wider range of environments, including (1) mixed tide- and fluvial-dominated, wave-influenced deltas, (2) non-deltaic shorelines (tidal channels, tidal flats and vegetated swamps), and (3) lower shoreface deposits (FA8). The progradational to aggradational evolution of this coastal succession is represented by an overall upward decrease in grain size, decrease in fluvial influence and increase in tidal influence. This evolution is attributed to an allogenic increase in the rate of accommodation space generation relative to sediment supply due to tectonic activity of the rift basin. In addition, during progradation, there was also an autogenic increase in sediment storage on the coastal plain, resulting in a gradual autoretreat of the depositional system. This is manifested in the subsequent aggradation of the system, when coarse-grained sandstones were trapped in proximal locations, while only finer grained sediment reached the coastline, where it was readily reworked by tidal and wave processes.     

Hydrocarbon source rock potential in the southwestern Gulf of Suez graben: Insights from organic geochemistry and palynofacies studies on well samples from the Ras El Bahar Oilfield

Palynological and biomarker characteristics of organic facies recovered from Cretaceous–Miocene well samples in the Ras El Bahar Oilfield, southwest Gulf of Suez, and their correlation with lithologies, environments of deposition and thermal maturity have provided a sound basis for determining their source potential for hydrocarbons. In addition to palynofacies analysis, TOC/Rock-Eval pyrolysis, kerogen concentrates, bitumen extraction, carbon isotopes and saturated and aromatic biomarkers enable qualitative and quantitative assessments of sedimentary organic matter to be made. The results obtained from Rock-Eval pyrolysis and molecular biomarker data indicate that most of the samples come from horizons that have fair to good hydrocarbon generation potential in the study area. The Upper Cretaceous–Paleocene-Lower Eocene samples contain mostly Type-II to Type-III organic matter with the capability of generating oil and gas. The sediments concerned accumulated in dysoxic–anoxic marine environments. By contrast, the Miocene rocks yielded mainly Type-III and Type-II/III organic matter with mainly gas-generating potential. These rocks reflect deposition in a marine environment into which there was significant terrigenous input. Three palynofacies types have been recognized. The first (A) consists of Type-III gas-prone kerogen and is typical of the Early–Middle Miocene Belayim, Kareem and upper Rudeis formations. The second (B) has mixed oil and gas features and characterizes the remainder of the Rudeis Formation. The third association (C) is dominated by amorphous organic matter, classified as borderline Type-II oil-prone kerogen, and is typical of the Matulla (Turonian–Santonian) and Wata (Turonian) formations. Rock-Eval T_max, PI, hopane and sterane biomarkers consistently indicate an immature to early mature stage of thermal maturity for the whole of the studied succession.     

High-resolution sequence stratigraphy,sedimentology and reservoir quality evaluation of the Yaojia Formation in the Longxi area of the Western Slope,Songliao Basin,China

Delta-front sand bodies with large remaining hydrocarbon reserves are widespread in the Upper Cretaceous Yaojia Formation in the Longxi area of the Western Slope, Songliao Basin, China. High-resolution sequence stratigraphy and sedimentology are performed based on core observations, well logs, and seismic profile interpretations. An evaluation of the reservoir quality of the Yaojia Formation is critical for further petroleum exploration and development. The Yaojia Formation is interpreted as a third-order sequence, comprising a transgressive systems tract (TST) and a regressive systems tract (RST), which spans 4.5 Myr during the Late Cretaceous. Within this third-order sequence, nine fourth-order sequences (FS9–FS1) are recognized. The average duration of a fourth-order sequence is approximately 0.5 Myr. The TST (FS9–FS5) mostly comprises subaqueous distributary channel fills, mouth bars, and distal bars, which pass upward into shallow-lake facies of the TST top (FS5). The RST (FS4–FS1) mainly contains subaqueous distributary-channel and interdistributary-bay deposits. Based on thin-sections, X-ray diffraction (XRD), scanning electron microscope (SEM) and high-pressure mercury-intrusion (HPMI) analyses, a petrographic study is conducted to explore the impact of the sedimentary cyclicity and facies changes on reservoir quality. The Yaojia sandstones are mainly composed of lithic arkoses and feldspathic litharenites. The sandstone cements mostly include calcite, illite, chlorite, and secondary quartz, occurring as grain coating or filling pores. The Yaojia sandstones have average core plug porosity of 18.55% and permeability of 100.77 × 10⁻³ μm², which results from abundant intergranular pores and dissolved pores with good connectivity. Due to the relatively coarser sediments and abundant dissolved pores in the feldspars, the FS4–FS1 sandstones have better reservoir quality than the FS9–FS5 sandstones, developing relatively higher porosity and permeability, especially the FS1 and FS2 sandstones. The source–reservoir–cap-rock assemblages were formed with the adjoining semi-deep lake mudstones that were developed in the Nenjiang and Qingshankou Formations. This study reveals the deposition and distribution of the delta-front sand bodies of the Yaojia Formation within a sequence stratigraphic framework as well as the factors controlling the Yaojia sandstones reservoir quality. The research is of great significance for the further exploration of the Yaojia Formation in the Longxi area, as well as in other similar lacustrine contexts.     

Influence of natural fractures on gas accumulation in the Upper Triassic tight gas sandstones in the northwestern Sichuan Basin,China

The Upper Triassic Xujiahe Formation in the northwestern Sichuan Basin, China, is a typical tight gas sandstone reservoir that contains natural fractures and has an average porosity of 1.10% and air permeability less than 0.1 md because of compaction and cementation. According to outcrops, cores and image logs, three types of natural fractures, namely, tectonic, diagenetic and overpressure-related fractures, have developed in the tight gas sandstones. The tectonic fractures include small faults, intraformational shear fractures and horizontal shear fractures, whereas the diagenetic fractures mainly include bed-parallel fractures. According to thin sections, the microfractures also include tectonic, diagenetic and overpressure-related microfractures. The diagenetic microfractures consist of transgranular, intragranular and grain-boundary fractures. Among these fractures, intraformational shear fractures, horizontal shear fractures and small faults are predominant and significant for fluid movement. Based on the Monte Carlo method, these intraformational shear fractures and horizontal shear fractures improve the reservoir porosity and permeability, thus serving as an important storage space and primary fluid-flow channels in the tight sandstones. The small faults may provide seepage channels in adjacent layers by cutting through layers. In addition, these intragranular and grain-boundary fractures increase the connectivity of the tight gas sandstones by linking tiny pores. The tectonic microfractures improve the seepage capability of the tight gas sandstones to some extent. Low-dip angle fractures are more abundant in the T₃X³ member than in the T₃X² and T₃X⁴ members. The fracture intensities of the sandstones in the T₃X³ member are greater than those in the T₃X² and T₃X⁴ members. The fracture intensities do not always decrease with increasing bed thickness for the tight sandstones. When the bed thickness of the tight sandstones is less than 1.0 m, the fracture intensities increase with increasing bed thickness in the T₃X³ member. Fluid inclusion evidence and burial history analysis indicate that the tectonic fractures developed over three periods. The first period was at the end of the Triassic to the Early Jurassic. The tectonic fractures developed during oil generation but before the matrix's porosity and permeability reduced, which suggests that these tectonic fractures could provide seepage channels for oil migration and accumulation. The second period was at the end of the Cretaceous after the matrix's porosity and permeability reduced but during peak gas generation, which indicates that gas mainly migrated and accumulated in the tectonic fractures. The third period was at the end of the Eogene to the Early Neogene. The tectonic fractures could provide seepage channels for secondary gas migration and accumulation from the Upper Triassic Xujiahe Formation into the overlying Jurassic Formation.     

Permeability heterogeneity in bioturbated sediments and implications for waterflooding of tight-oil reservoirs,Cardium Formation,Pembina Field,Alberta, Canada

Bioturbated sediments recording distal expressions of paralic depositional environments are increasingly being exploited for hydrocarbons in the super-giant Pembina Field (Cardium Formation), Alberta, Canada. These strata were previously considered unproductive due to limited vertical and horizontal connectivity between permeable beds. In these “tight oil” plays (0.1–10 mD), pressure decay profile permeametry (micropermeability) data indicate that sand-filled burrows provide vertical permeable pathways between bioturbated and parallel-laminated sandstone beds in the central, northeast and northwest parts of the field. This relationship enables the economic exploitation of hydrocarbons via horizontal drilling and multi-stage hydraulic fracturing. As the exploitation of bioturbated strata progresses in the Pembina Field, additional primary targets are being sought out, and horizontal waterflooding is being considered in areas where horizontal wells exist. Proximal to historical produced conventional targets, reservoir analyses indicate that areas where the bioturbated facies average permeability lies between 0.35 mD and 0.85 mD and sandstone isopach thicknesses are between 0.25 m and 2.5 m should be targeted in east-central Pembina.Micropermeability values enable correlation of bulk permeability from plugs and full-diameter samples to the heterogeneous permeability distributions in intensely bioturbated strata. Bulk and micropermeability data are graphically compared, and permeability distributions are mapped across the field. Using isopach thickness of bioturbated facies, production data, and permeability data, “sweet spots” are identified for placement of effective waterfloods.Production information for recently drilled horizontal wells in the Pembina Field demonstrate that bioturbated muddy sandstones and sandy mudstones in paralic environments can be economically exploited when sand-filled burrows provide connectivity between sand beds. However, well performance within these poorly understood unconventional tight oil plays can better be predicted with an in-depth characterization of their facies and complex permeability heterogeneities. Based on our results, it is clear that micropermeability analysis can be effectively employed to differentiate between economic and sub-economic plays, identify areas with high effective permeability, and high-grade areas for enhanced oil recovery schemes.     

Kilometer-scale fault-related thermal anomalies in tight gas sandstones

Upper Carboniferous sandstones make one of the most important tight gas reservoirs in Central Europe. This study integrates a variety of geothermometers (chlorite thermometry, fluid inclusion microthermometry and vitrinite reflection measurements) to characterize a thermal anomaly in a reservoir outcrop analog (Piesberg quarry, Lower Saxony Basin), which is assumed responsible for high temperatures of circa 300 °C, deteriorating reservoir quality entirely. The tight gas siliciclastics were overprinted with temperatures approximately 90–120 °C higher compared to outcropping rocks of a similar stratigraphic position some 15 km to the west. The local temperature increase can be explained by circulating hydrothermal fluids along the fault damage zone of a large NNW-SSE striking fault with a displacement of up to 600 m in the east of the quarry, laterally heating up the entire exposed tight gas sandstones. The km-scale lateral extent of this fault-bound thermal anomaly is evidenced by vitrinite reflectance measurements of meta-anthracite coals (VR_rot ∼ 4.66) and the temperature-related diagenetic overprint. Data suggest that this thermal event and the associated highest coalification was reached prior to peak subsidence during Late Jurassic rifting (162 Ma) based on K-Ar dating of the <2 μm fraction of the tight gas sandstones. Associated stable isotope data from fluid inclusions, hosted in a first fracture filling quartz generation (T ∼ 250 °C) close to lithostatic fluid pressure (P ∼ 1000 bars), together with authigenic chlorite growth in mineralized extension fractures, demonstrate that coalification was not subject to significant changes during ongoing burial. This is further evidenced by the biaxial reflectance anisotropy of meta-anthracite coals. A second event of quartz vein formation occurred at lower temperatures (T ∼ 180 °C) and lower (hydrostatic) pressure conditions (P ∼ 400 bars) and can be related to basin inversion. This second quartz generation might be associated with a second event of illite growth and K-Ar ages of 96.5–106.7 Ma derived from the <0.2 μm fraction of the tight gas sandstones.This study demonstrates the exploration risk of fault-bound thermal anomalies by deteriorating entirely the reservoir quality of tight gas sandstones with respect to porosity and permeability due to the cementation with temperature-related authigenic cements. It documents that peak temperatures are not necessarily associated with peak subsidence. Consequently, these phenomena need to be considered in petroleum system models to avoid, for example, overestimates of burial depth and reservoir quality.     

Modeling uncertainty in the three-dimensional structural deformation and stratigraphic evolution from outcrop data: Implications for submarine channel knickpoint recognition

Digital outcrop models help to constrain the interactions of stratigraphic and structural heterogeneity on ancient depositional systems. This study uses a stochastic approach that incorporates stratigraphic and structural modeling to interrogate the three-dimensional morphology of deep-water channel strata outcropping on Sierra del Toro in the Magallanes Basin of Chile. This approach considers the relative contributions, and associated uncertainty, of erosional downcutting versus post-depositional structural folding and small-offset faulting on the present-day configuration of the submarine channel complexes. Paleodepositional channel-belt gradients were modeled using a combination of three-dimensional visualization, stochastic surface modeling, palinspastic restoration, and decompaction modeling that are bound with errors constrained by stratigraphic and structural uncertainty. Modeling results indicate that at least 100 m of downcutting occurs over 6 km, and the resultant thalweg gradient of 64–125 m/km (decompacted) suggests that the Cerro Toro axial channel belt is an out-of-grade depositional system. Furthermore, the presence of steeper segments (100–175 m/km decompacted) suggests the preservation of one or more knickpoints that are similar in magnitude to tectonically-induced knickpoints on the modern seafloor. The interpreted knickpoints are correlated with a decreasing channel width-depth ratio and an increase of channel depth. These results indicate that stochastic surface modeling using digital outcrop models can constrain stratigraphic interpretations and post-depositional structural heterogeneity.     

琼东南盆地北礁地区梅山组丘形反射特征

目前琼东南盆地北礁凹陷中中新统梅山组顶部丘形反射引起广泛关注,但对其成因有不同认识。本文通过高精度二维、三维地震、钻井资料,研究丘形反射的特征。研究表明北礁地区梅山组顶部发育近东西向展布的长条形丘体,丘间为水道,丘内为中-弱振幅的地震反射,与西南部强振幅水道砂岩形成鲜明的对比,波阻抗反演揭示丘内为低波阻抗,属泥岩范畴。梅山组塑性丘内地层发生重力扩展,在其上覆的脆性地层（强振幅砂岩和弱振幅泥岩）发育多边形断层,反推出梅山组形成于深水环境,丘为泥丘,沉积环境分析也认为北礁凹陷中中新世为半深海沉积,梅山组的丘-谷分别对应上覆地层的谷-丘,认为是底流剥蚀/沉积成因。本文的研究对南海北部丘形反射的认识有重要意义,并可降低油气探勘风险。     

An ichnological-assemblage approach to reservoir heterogeneity assessment in bioturbated strata: Insights from the Lower Cretaceous Viking Formation,Alberta, Canada

Facies-scale trends in porosity and permeability are commonly mapped for reservoir models and flow simulation; however, these trends are too broad to capture bed and bed-set heterogeneity, and there is a need to up-scale detailed, bed-scale observations, especially in low-permeability reservoir intervals. Here we utilize sedimentology and ichnology at the bed- and bedset-scale to constrain the range of porosity and permeability that can be expected within facies of the Lower Cretaceous Viking Formation of south-central, Alberta, Canada.Three main facies were recognized, representing deposition from the middle shoreface to the upper offshore. Amalgamated, hummocky cross-stratified sandstone facies (Facies S_HCS) consist of alternations between intensely bioturbated beds and sparsely bioturbated/laminated beds. Trace fossil assemblages in bioturbated beds of Facies S_HCS are attributable to the archetypal Skolithos Ichnofacies, and are morphologically characterized by vertical, sand-filled shafts (VSS). Bioturbated beds show poor reservoir properties (max: 10% porosity, mean: 85.1 mD) compared to laminated beds (max 20% porosity, mean: 186 mD). Bioturbated muddy sandstone facies (Facies S_B) represent trace fossil assemblages primarily attributable to the proximal expression of the Cruziana Ichnofacies. Four ichnological assemblages occur in varying proportions, namely sediment-churning assemblages (SC), horizontal sand-filled tube assemblages (HSF), VSS assemblages, and mud-filled, lined, or with spreiten (MLS) assemblages. Ichnological assemblages containing horizontal (max: 30% porosity, mean: 1.28 mD) or vertical sand-filled burrows (max: 10% porosity, mean: 2.2 mD) generally have better reservoir properties than laminated beds (max: 20% porosity, mean: 0.98 mD). Conversely, ichnological assemblages that consist of muddy trace fossils have lower porosity and permeability (max 10% porosity, mean: 0.89 mD). Highly bioturbated, sediment churned fabrics have only slightly higher porosity and permeability overall (max: 15% porosity, mean: 1.29 mD). Bioturbated sandy mudstone facies (Facies M_B) contain ichnofossils representing an archetypal expression of the Cruziana Ichnofacies. Four ichnological assemblages occur throughout Facies M_B that are similar to Facies S_B; SC, HSF, VSS, and MLS assemblages. The SC (max: 15% porosity, mean: 21.67 mD), HSF (max: 20% porosity, mean: 3.79 mD), and VSS (max: 25% porosity, mean: 7.35 mD) ichnological assemblages have similar or slightly lower values than the laminated beds (max: 20% porosity, mean: 10.7 mD). However, MLS assemblages have substantially lower reservoir quality (max: 10% porosity, mean: 0.66 mD).Our results indicate that the most likely occurrence of good reservoir characteristics in bioturbated strata exists in sand-filled ichnological assemblages. This is especially true within the muddy upper offshore to lower shoreface, where vertically-oriented trace fossils can interconnect otherwise hydraulically isolated laminated sandstone beds; this improves vertical fluid transmission. The results of this work largely corroborate previous findings about ichnological impacts on reservoir properties. Unlike previous studies, however, we demonstrate that the characteristics of the ichnological assemblage, such as burrow form and the nature of burrow fill, also play an important role in determining reservoir characteristics. It follows that not all bioturbated intervals (attributed to the same facies) should be treated equally. When upscaling bed-scale observations to the reservoir, a range of possible permeability-porosity values can be tested for model sensitivity and to help determine an appropriate representative elementary volume.     

Jurassic source rocks in the Vienna Basin (Austria): Assessment of conventional and unconventional petroleum potential

The Upper Jurassic marlstones (Mikulov Fm.) and marly limestones (Falkenstein Fm.) are the main source rocks for conventional hydrocarbons in the Vienna Basin in Austria. In addition, the Mikulov Formation has been considered a potential shale gas play. In this paper, organic geochemical, petrographical and mineralogical data from both formations in borehole Staatz 1 are used to determine the source potential and its vertical variability. Additional samples from other boreholes are used to evaluate lateral trends. Deltaic sediments (Lower Quarzarenite Member) and prodelta shales (Lower Shale Member) of the Middle Jurassic Gresten Formation have been discussed as secondary sources for hydrocarbons in the Vienna Basin area and are therefore included in the present study.The Falkenstein and Mikulov formations in Staatz 1 contain up to 2.5 wt%TOC. The organic matter is dominated by algal material. Nevertheless, HI values are relative low (<400 mgHC/gTOC), a result of organic matter degradation in a dysoxic environment. Both formations hold a fair to good petroleum potential. Because of its great thickness (∼1500 m), the source potential index of the Upper Jurrasic interval is high (7.5 tHC/m²). Within the oil window, the Falkenstein and Mikulov formations will produce paraffinic-naphtenic-aromatic low wax oil with low sulfur content. Whereas vertical variations are minor, limited data from the deep overmature samples suggest that original TOC contents may have increased basinwards. Based on TOC contents (typically <2.0 wt%) and the very deep position of the maturity cut-off values for shale oil/gas production (∼4000 and 5000 m, respectively), the potential for economic recovery of unconventional petroleum is limited. The Lower Quarzarenite Member of the Middle Jurassic Gresten Formation hosts a moderate oil potential, while the Lower Shale Member is are poor source rock.