静压管桩折断接桩补强加固技术

当前静压桩做为基础处理的常规手段得到普遍应用,但在施工中产生的各种影响桩身质量的缺陷处理方法却没有统一的规定,探讨和研究静压桩的缺陷补强方法是静压桩施工中的重要课题。介绍了静压桩受横向力折断后采用桩管内灌注钢筋混凝土桩心补强加固处理的成功案例,为静压桩的缺陷处理提供了参考。     

预制钢筋混凝土方桩桩端后注浆工艺设计与施工

在分析了目前华东地区常用的钻孔灌注桩、预应力混凝土管桩及预制钢筋混凝土方桩等几种桩型优缺点的基础上,提出了将桩端后注浆工艺与预制钢筋混凝土方桩相结合的工艺,并通过工程案例验证该工艺既能提高单桩承载力,节约成本,又能够弥补钻孔灌注桩施工噪声大、效率低、环境污染严重等不足。介绍了这种组合工艺的设计与施工工艺。     

A macroscopic damage‐plastic constitutive law for modeling quasi‐brittle fracture and ductile behavior of concrete

A new phenomenological macroscopic constitutive model for the numerical simulation of quasi‐brittle fracture and ductile concrete behavior, under general triaxial stress conditions, is presented. The model is particularly addressed to simulate a wide range of confinement stress states, as also, to capture the strong influence of the mean stress value in the concrete failure mechanisms. The model is based on a two‐surface damage‐plastic formulation. The mechanical behavior in different domains of the stress space is separately described by means of a quasi‐brittle or ductile material response:

相似文献   

预制装配式剪力墙结构墙板节点抗震性能研究

为掌握预制装配式剪力墙结构墙板节点的抗震性能,对2个现浇试件和2个预制装配式试件进行了拟静力试验.结合非线性分析手段,从承载能力、变形能力、受力机理以及破坏模式等方面综合分析了其抗震性能,并初步探讨了墙板连接钢筋的合理直径.分析结果表明:与现浇试件相比,预制装配式试件承载能力较高,位移延性系数相同,滞同环均较饱满,具有...     

钢管混凝土叠合柱边框内藏钢桁架核心筒抗震性能试验研究

为进一步改善混凝土核心简的抗震性能,本文提出了钢管混凝土叠合柱边框内藏钢桁架组合核心筒.进行了2个1/6缩尺的核心筒模型在低周反复荷载下的抗震性能试验研究,1个为钢管混凝土叠合柱边框毛组合核心筒,1个为钢管混凝土叠合柱边框内藏钢桁架组合核心筒.通过试验,对比分析了2个核心简的承载力、延性、刚度及其衰减、滞回特性、耗能能力及破坏特征,给出了钢管混凝土叠合柱边框内藏钢桁架组合核心筒的承载力计算模型,计算结果与实测值符合较好.研究表明,钢管混凝土叠合柱边框内藏钢桁架组合核心筒与钢管混凝土叠合柱边框组合核心筒相比,其抗震性能明显提高.     

小剪跨比格构式混凝土墙体抗震性能试验

文章旨在研究不同剪跨比的格构式混凝土墙体抗震性能.将生产车间预制成EPS保温模块拼接成墙体模板,在横向和纵向孔洞中分别布置钢筋,然后在孔内浇筑自密实混凝土,形成“EPS新型节能”格构式混凝土墙体,然后对6个参数不同的试件进行低周反复水平荷载作用的试验.结果,墙体破坏形态为:首先墙体相邻格构柱间的连梁出现环状裂缝和“X”...     

再生混凝土框架抗震性能试验研究

通过2榀再生骨料掺量分别为25%、50%的再生混凝土框架和1榀普通对比混凝土框架的低周反复加载试验,研究了再生混凝土框架的受力全过程、开裂荷载和极限承载力、破坏形态,分析了再生混凝土框架的滞回曲线、骨架曲线、变形性能、耗能能力等抗震性能,并和普通混凝土框架进行了对比分析。研究结果表明,随着再生骨料掺量的增加,再生混凝土框架的极限承载力、变形能力、耗能能力等抗震性能没有明显降低,再生混凝土框架具有较好的抗震性能,再生混凝土框架应用于实际工程是可行的。文中研究成果可为再生混凝土框架结构的工程应用提供依据。     

Analytical study of performance evaluation for seismic retrofitting of reinforced concrete building using 3D dynamic nonlinear finite element analysis

This paper presents three-dimensional fi nite element (FE) analyses of an all-frame model of a three-story reinforced concrete (RC) building damaged in the 1999 Taiwan Chi-Chi Earthquake. Non-structural brick walls of the building acted as a seismic resistant element although their contributions were neglected in the design. Hence, the entire structure of a typical frame was modeled and static and dynamic nonlinear analyses were conducted to evaluate the contributions of the brick walls. However, the results of the analyses were considerably overestimated due to coarse mesh discretizations, which were unavoidable due to limited computer resources. This study corrects the overestimations by modifying (1) the tensile strengths and (2) shear stiffness reduction factors of concrete and brick. The results indicate that brick walls improve frame strength although shear failures are caused in columns shortened by spandrel walls. Then, the effectiveness of three types of seismic retrofi ts is evaluated. The maximum drift of the firstoor is reduced by 89.3%, 94.8%, and 27.5% by Steel-confi ned, Full-RC, and Full-brick models, respectively. Finally, feasibility analyses of models with soils were conducted. The analyses indicated that the soils elongate the natural period of building models although no signifi cant differences were observed.     

Pseudo-dynamic test and numerical simulation of high-strength concrete frame structure reinforced with high-strength rebars

This paper describes an investigation of a high-strength concrete frame reinforced with high-strength rebars that was tested in the structure engineering laboratory at Shenyang Jianzhu University. The frame specimen was pseudo- dynamically loaded to indicate three earthquake ground motions of different hazard levels, after which the test specimen was subjected to a pseudo-static loading. This paper focuses on the design, construction and experiment of the test frame and validation of the simulation models. Research shows that a high-strength concrete frame reinforced with high-strength rebars is more eff icient and economical than a traditional reinforced concrete frame structure. In addition to the economies achieved by effective use of materials, research shows that the frame can provide enough strength to exceed conventional reinforced concrete frames and provide acceptable ductility. The test study provides evidence to validate the performance of a high- strength concrete frame designed according to current seismic code provisions. Based on previous test research, a nonlinear FEM analysis is completed by using OpenSees software. The dynamic responses of the frame structure are numerically analyzed. The results of the numerical simulation show that the model can calculate the seismic responses of the frame by OpenSees. At the same time, the test provides additional opportunities to validate the performance of the simulation models.