视电阻率曲线在研究聚煤盆地沉积环境分析及聚煤规律中的应用

分析聚煤盆地沉积环境,研究聚煤盆地煤层分布规律,对指导煤田预测和指导勘探工作有着重要的作用。充分利用数字测井的视电阻率曲线来分析、解释原始沉积环境,研究聚煤盆地的煤层分布特点,具有一定的现实意义。     

安徽省耿皇勘探区煤系地层沉积环境及成煤条件浅析

以耿皇勘探区钻孔资料为基础,对该区煤系地层沉积环境及成煤条件进行分析,简述了本区煤系地层是在海退基础上,以三角洲为主体的三角洲相与泻湖海湾潮坪相相互交替的沉积体系,通过对该特点的分析研究,为今后地质勘探和煤矿开采提供了借鉴和依据。     

济宁颜店铁矿地质特征及济宁岩群含矿性研究

伏于济宁滋阳山一带千米盖层之下的古元古代济宁岩群是一套低绿片岩相变质含铁岩系,主要岩石组合为千枚岩、板岩、磁铁石英岩等,其原岩为海相含灰质泥岩、砂岩类中酸性火山岩、硅铁岩等,该套岩系最大控制厚度达580m。其中赋存的条带状磁铁石英岩呈层状、似层状埋深在1612．89～1796．54m之间,共有5层铁矿,总厚度85．53m。估算预测的铁矿资源量（334）9．76亿t,mFe平均品位22．37％;低品位矿体预测的资源量（334）2．64亿t,mFe平均品位16．99％。     

塔里木盆地塔河地区下石炭统巴楚组沉积演化

以塔里木盆地加里东期和海西两期构造运动为背景,结合现有的岩心、露头、测井、录井和地震资料,对巴楚组可识别出早期的辫状河三角洲沉积,中期的渴湖沉积和盐湖沉积,以及晚期的咸化溻湖沉积。本文分别从横向上和纵向上对塔河地区巴楚组沉积演化进行深入分析;总结了巴楚组构造运动与沉积响应之间的关系,以期为该地区的下石炭统巴楚组的进一步勘探提供科学依据。     

准噶尔盆地西北缘三叠系层序地层与隐蔽油气藏勘探

层序地层学及层序地层原理指导下的地震资料解释为地层、岩性油气藏勘探提供了理论和技术支持。为配合准噶尔盆地西北缘油气勘探从克乌断裂带上盘向下盘、从构造油气藏向地层、岩性等隐蔽油气藏的转变,利用陆相层序地层学理论和地球物理资料,将三叠系划分为1个二级层序、5个三级层序和8个体系域,进而总结出拗陷完整型和拗陷残缺型两种层序类型。结合测井约束地震反演和井间沉积对比,探讨了三叠系砂体结构和湖侵体系域地层超覆、湖退体系域及最大湖泛面附近小规模滑塌浊积体岩性透镜体等5种圈闭发育模式。油气成藏综合条件分析指出有效圈闭和油源断层的识别是制约斜坡带岩性油气藏勘探的关键。     

四川义敦地区早中三叠世义敦群岩相古地理

经过对四川义敦地区中下三叠统党思组、列衣纽涉及到的9幅1：5万区调图幅和18条剖面、沉积等厚线的综合分析研究,认为该区主体部分在早中三叠世沉积环境经历了深海盆地海底扇中-外扇相→深海盆地浊流相→下斜坡相→上斜坡相→外陆棚相→外陆棚-上斜坡相的演化。岩相古地理图上的沉积等厚线显示,该区有上麻绒盆地和义敦盆地等2个沉积中心,在拉纳山一带还出出现有拗陷盆地。     

成都洛带上沙溪庙组气藏地层水分布特征研究

成都洛带沙溪庙组气藏普遍含水,气藏不同位置地层水含量对于天然气的产量及产出时间有很大的影响。地层水矿化度较高,属CaCl2型,具混合水的水化学特征。地层水与天然气共同赋存同一储层中,属于同一压力系统,与天然气伴生产出,无边、底水存在,缺乏有效补给。含水层往往分布于有利的沉积微相一分流河道及河口坝中,厚度大、物性好的砂体含水特征更为明显。通过对该气藏水水化学特征及气水关系的研究,初步明确了该地层水的分布特征。     

柴达木盆地西南部砂6井第三系沉积相研究

结合前人的研究成果,运用野外地质剖面、测井相标志的研究方法,对柴达木盆地西南第三系沉积相进行了较全面、系统的研究,描述了柴达木盆地砂6井第三系主要发育的三种沉积相及发育的主要类型,指出了研究区内有利于油气生成和储集的沉积相类型。     

Evaluation of distributed recharge in an upland semi-arid karst system: the West Bank Mountain Aquifer,Middle East

Assessment of recharge in a structurally complex upland karst limestone aquifer situated in a semi-arid environment is difficult. Resort to surrogate indicators such as measurement of spring outflow and borehole discharge, is a common alternative, and attempts to apply conventional soil moisture deficit analysis may not adequately account for the intermittent spate conditions that arise in such environments. A modelling approach has been made using the West Bank Mountain Aquifer system in the Middle East as a trial. The model uses object oriented software which allows various objects to be switched on and off. Each of the main recharge processes identified in the West Bank is incorporated. The model allows either conventional soil moisture deficit analysis calculations or wetting threshold calculations to be made as appropriate, and accommodates both direct recharge and secondary recharge. Daily time steps enable recharge and runoff routing to be calculated for each node. Model runs have enabled a series of simulations for each of the three aquifer basins in the West Bank and for the whole of the West Bank. These provide recharge estimates comparable to those prepared by earlier workers by conventional means. The model is adaptable and has been successfully used in other environments.     

In situ estimation of the effective chemical diffusion coefficient of a rock matrix in a fractured aquifer

An in situ method of estimating the effective diffusion coefficient for a chemical constituent that diffuses into the primary porosity of a rock is developed by abruptly changing the concentration of the dissolved constituent in a borehole in contact with the rock matrix and monitoring the time-varying concentration. The experiment was conducted in a borehole completed in mudstone on the campus of the University of the Free State in Bloemfontein, South Africa. Numerous tracer tests were conducted at this site, which left a residual concentration of sodium chloride in boreholes that diffused into the rock matrix over a period of years. Fresh water was introduced into a borehole in contact with the mudstone, and the time-varying increase of chloride was observed by monitoring the electrical conductivity (EC) at various depths in the borehole. Estimates of the effective diffusion coefficient were obtained by interpreting measurements of EC over 34 d. The effective diffusion coefficient at a depth of 36 m was approximately 7.8×10^?6 m²/d, but was sensitive to the assumed matrix porosity. The formation factor and mass flux for the mudstone were also estimated from the experiment.