鲁西寒武系凝块石特征及其形成机制的探讨

鲁西地区寒武纪地层分布广泛、出露连续,中寒武世张夏组和晚寒武世炒米店组均有凝块石产出。本文通过对该地区凝块石的野外观察和镜下鉴定,认为形成凝块石的微生物主要为附枝菌,其次是葛万菌、肾球菌和放射状菌,根据枝杈的直径大小、枝杈的细胞状分割结构及结晶程度等,附枝菌又可细分为:泥晶粗枝杈状、泥晶分段枝杈状、泥晶细枝杈状、微晶管状枝杈状和亮晶粗枝杈状。相应的群落也可划分为:泥晶树枝状、单个房室状、簇球状和亮晶树枝状。凝块石的凝块为附枝菌等蓝细菌钙化体和周围粘结的碳酸盐微粒所组成的团块,其按形态可分为:斑状、网状和树枝状。根据上述的研究,本文认为形成凝块石的理想过程可以分为4个阶段:蓝细菌的捕捉和粘结作用、蓝细菌自身钙化作用、碳酸盐的原地沉淀和沉积后作用。     

京津地区长城系下伏变质岩系变质年龄及长城系底界年龄的厘定

长城系属中元古宇底部,其底界年龄一直存在争议。国内发表的数据在2000-1640Ma之间。通过分析以往数据,并据近年新资料,认为长城系底界年龄划在(1700±20)Ma是比较合理的。     

记广东南雄盆地上白垩统主田组鸟脚类足迹及中国已命名的大型鸟脚类足迹的属级新观察

记述了广东省南雄盆地上白垩统主田组3组恐龙行迹,由杨梅坑足迹点的足迹命名了南雄鸭嘴龙足迹（Hadrosauropodus nanxiongensis ichnosp. nov.）一新种;古市足迹点的足迹归入鸭嘴龙足迹一未定种（Hadrosauropodus isp.）。这是中国鸭嘴龙足迹属的首次描述,将该足迹的分布从北美拓展至中国,并为南雄盆地存在大型的鸭嘴龙提供了新的化石证据。还整理了中国已描述的大型鸟脚类足迹：中国足迹（Sinoichnites）被定为非正式的塑模标本;扬子足印（Yangtzepus）被归入兽脚类足迹;禽龙足迹（Iguanodonopus）被认为是裸名,归入禽龙足迹（Iguanodontipus）;嘉荫足迹（Jiayinosauropus）增加了新材料并得以具体描述;内乡足迹（Neixiang footprint）得以重新描述。     

准噶尔盆地南缘西山窑组沉积特征及聚煤规律分析

在对大量钻孔资料、测井资料、野外露头及古生物化石资料进行分析的基础上,应用经典层序地层学基本理论和方法,对准噶尔盆地南缘西山窑组进行了层序地层划分,共识别出SQ1和SQ2两个三级层序,并根据地层叠置样式、沉积旋回特征细分为6个体系域。通过沉积基础图件、沉积环境的分析明确了研究区西山窑组沉积演化特征：SQ1层序中,河控三角洲发育,在湖缘及泛滥平原区形成稳定的泥炭沼泽,且聚煤作用时间长,强度大,分布广,形成了稳定的厚煤层;SQ2层序中,由于构造变动频繁,后期剥蚀严重,导致聚煤作用逐渐减弱。对准噶尔盆地南缘西山窑组的沉积环境特征和煤层聚集规律的分析为下一步的煤炭勘探提供了依据。     

班公湖- 怒江缝合带同碰撞海沟盆地砂岩物源分析及其大地构造意义

同碰撞海沟沉积可为重建板块缝合带大地构造演化、约束陆块初始碰撞时间提供重要信息。本文对班公湖-怒江缝合带西段的改则县亚多组和日土县多仁组进行了沉积学、岩相学、碎屑锆石年代学、重矿物研究。沉积学分析表明,多仁组、亚多组沉积于海底扇环境。最年轻的碎屑锆石年龄限制了最早沉积时代为晚侏罗世。多仁组、亚多组砂岩Q：F：L分别为52：4：44、32：8：60,均以丰富的沉积岩和酸性火成岩岩屑及少量的变质岩屑为特征;重矿物以磷灰石、锆石、电气石等稳定重矿物为主。多仁组和亚多组具有相似的碎屑锆石年龄分布模式,主峰分布在350～200 Ma、550～450 Ma、900～750 Ma、1900～1800 Ma、2550～2450 Ma范围内。这些数据表明,亚多组、多仁组碎屑物质来源于沉积区北侧的班公湖-怒江缝合带增生杂岩及南羌塘岩浆岩。多仁组、亚多组出现的大量沉积岩岩屑,表明物源区经历了广泛的构造缩短作用,导致沉积岩和同期岩浆岩被剥蚀,因此多仁组、亚多组是拉萨-羌塘同碰撞的产物。据此推断,沿班公湖-怒江缝合带改则-日土区域拉萨-羌塘初始碰撞发生在晚侏罗世多仁组、亚多组沉积之前。     

西藏罗布真矿区林子宗群火山岩锆石U-Pb年龄、地球化学特征及其地质意义

罗布真铅锌多金属矿床位于冈底斯火山-岩浆活动带的中南部,矿区内广泛发育林子宗群火山岩,岩性为英安岩和流纹质晶屑凝灰岩。LA-ICP-MS锆石U-Pb定年结果显示,罗布真矿区内林子宗群英安岩的成岩年龄为(49.14±0.86) Ma,应属于帕那组火山岩地层,并非前人所认为的典中组。岩石具有高K、低Ti的特征,属于高钾钙碱系列;相对富集Rb、Th、U、K、Zr、Hf等元素,亏损Nb、Ta、P、Ti、Sr等元素,且轻重稀土分馏明显,具有明显的负铕(δEu=0.50~0.65)异常。在印度-亚洲大陆汇聚的过程中,新特提斯洋向欧亚大陆俯冲,约50 Ma发生了大规模的火山、岩浆作用,同时岩浆-热液成矿作用也进入高峰期,林子宗群火山岩的形成时代与该时代一致,形成于陆陆碰撞形成的板内环境。罗布真矿区林子宗群火山岩年龄的厘定,揭示了冈底斯带林子宗群帕那组火山岩具有赋矿潜力,对认识该地区林子宗群火山岩与热液脉型铅锌多金属矿化的关系具有指导意义。     

Palynological evidence for Jurassic strata in the Panagarh area, West Bengal, India

The Rajmahal Traps were discovered in the Panagarh area, West Bengal, during the exploration for coal resources. A Gondwana succession was found beneath the traps, consisting of the Early Cretaceous Intratrappean Rajmahal Formation, the Early Triassic Panchet Formation and the Late Permian coal-bearing Raniganj Formation. The present palynological study was aimed at confirming the age of the Panchet Formation. As a result of this study it has been found that Jurassic sediments are also included in the Panchet Formation. The study has revealed that the Panchet Formation, defined on a lithological basis, is a time-transgressive unit extending from the Early Triassic to the Late Jurassic, with a phase of non-deposition between the Middle Triassic and Middle Jurassic.     

Development of large‐scale seismites in Upper Cretaceous fluvial sandstones in a fault‐proximal setting

Large‐scale soft‐sediment deformation structures occur within fluvial sandstone bodies of the Upper Cretaceous Wahweap Formation in the Kaiparowits basin, southern Utah, USA. These structures represent an exceptional example of metre‐scale fault‐proximal, seismogenic load structures in nearly homogenous sandstones. The load structures consist of two types: large‐scale load casts and wedge‐shaped load structures. Large‐scale load casts penetrate up to 4·5 m into the underlying sandstone bed. Wedge‐shaped load structures include metre‐scale, parallel, sub‐vertical features and decimetre‐scale features along the periphery of the large‐scale load casts or other wedge‐shaped load structures. Wedge‐shaped load structures contain well‐developed, medial cataclastic shear deformation bands. All load structures contain pervasive well‐defined millimetre‐thick to centimetre‐thick internal laminae, oriented parallel to the outside form of the load structures and asymptotic to deformation bands. Both types of load structures formed because of an inverted density profile, earthquake‐triggered liquefaction and growth of irregularities (a Rayleigh–Taylor instability) on the sandstone–sandstone erosional contact. The internal laminae and deformation bands formed during deformation and clearly demonstrate polyphase deformation, recording a transition from liquefied to hydroplastic to brittle modes of deformation. Decimetre‐scale wedge‐shaped load structures on the edge of the large‐scale load casts probably formed towards the end of a seismic event after the sediment dewatered and increased the frictional contact of grains enough to impart strength to the sands. Metre‐scale wedge‐shaped load structures were created as the tips of downward foundering sediments were driven into fractures, which widened incrementally with seismic pulsation. With each widening of the fracture, gravity and a suction effect would draw additional sediment into the fracture. Superimposed laminae indicate a secondary syndeformational origin for internal laminae, probably by flow‐generated shearing and vibrofluidization mechanisms. Large‐scale and wedge‐shaped load structures, polyphase deformation and secondary laminae may characterize soft‐sediment deformation in certain fault‐proximal settings.     

Multiple controls on the paleoenvironment of the Early Cambrian marine black shales in the Sichuan Basin,SW China: Geochemical and organic carbon isotopic evidence

In order to understand the paleoenvironment of the Early Cambrian black shale deposition in the western part of the Yangtze Block, geochemical and organic carbon isotopic studies have been performed on two wells that have drilled through the Qiongzhusi Formation in the central and southeastern parts of Sichuan Basin. It shows that the lowest part of the Qiongzhusi Formation has high TOC abundance, while the middle and upper parts display relative low TOC content. Redox-sensitive element (Mo) and trace elemental redox indices (e.g., Ni/Co, V/Cr, U/Th and V/(V + Ni)) suggest that the high-TOC layers were deposited under anoxic conditions, whereas the low-TOC layers under relatively dysoxic/oxic conditions. The relationship of the enrichment factors of Mo and U further shows a transition from suboxic low-TOC layers to euxinic high-TOC layers. On the basis of the Mo-TOC relationship, the Qiongzhusi Formation black shales were deposited in a basin under moderately restricted conditions. Organic carbon isotopes display temporal variations in the Qiongzhusi Formation, with a positive excursion of δ¹³C_org values in the lower part and a continuous positive shift in the middle and upper parts. All these geochemical and isotopic criteria indicate a paleoenvironmental change from bottom anoxic to middle and upper dysoxic/oxic conditions for the Qiongzhusi Formation black shales. The correlation of organic carbon isotopic data for the Lower Cambrian black shales in different regions of the Yangtze Block shows consistent positive excursion of δ¹³C_org values in the lower part for each section. This excursion can be ascribed to the widespread Early Cambrian transgression in the Yangtze Block, under which black shales were deposited.     

陆上与水下喷发火山岩的区别及其对储层的影响——以松辽盆地营城组为例

陆上与水下喷发火山岩在岩性、结构构造、蚀变特征、产状、与下伏地层接触关系、孔隙和裂缝发育特点等6方面有显著区别。陆上喷发火山岩包括各种熔岩、碎屑熔岩、火山碎屑岩和沉火山碎屑岩;熔岩流纹构造发育,火山碎屑岩除发育常见层理外,还可见反丘构造;同生蚀变弱;与下伏地层多呈角度不整合接触,古风化壳常见,常含有陆相植物;主要储集空间为原生孔隙和冷凝收缩节理缝、次生溶蚀孔、矿物解理缝和构造裂缝。水下喷发火山岩多为具玻璃质结构的熔岩和含晶屑玻屑的层/沉凝灰岩、膨润土/伊利石岩/蒙脱石岩/沸石岩;常具枕状、球状构造,水平层理、粒序层理、变形层理;蚀变强烈;水下熔岩呈穹隆状、透镜状,凝灰岩为层状,近火山口的膨润土/伊利石岩/蒙脱石岩/沸石岩呈松散团窝状并夹有火山弹;与下伏地层呈整合、假整合或侵蚀接触;原生气孔、杏仁体内溶蚀孔和炸裂纹,岩球岩枕间孔和粒间孔,基质和斑晶蚀变孔缝,后期构造缝是主要储集空间。松辽盆地营城组陆上、水下喷发火山岩均有发育。其陆上喷发火山岩的典型标志为流纹构造、柱状节理,含炭化木/硅化木,与下伏地层呈角度不整合接触。水下喷发火山岩典型标志为珍珠岩、玻璃质结构、枕状构造、纹层状凝灰岩和膨润土。松辽盆地营城组的储层火山岩以陆上喷发火山岩为主;水下喷发火山岩中侵出相内带亚相珍珠岩为优质储层。