多步分解法初步研究石英砂中甲烷水合物p-T稳定条件

设计加工了一套研究海底沉积物水合物稳定条件实验装置,采用多步加热分解的方法对不同孔隙度的石英砂沉积物甲烷水合物相态平衡点(p-T稳定条件)进行了初步研究。为校验实验装置和实验方法,首先对甲烷水合物在十二烷基硫酸钠(SDS)溶液中的生成和分解过程进行了研究,获得的实验数据与文献数据吻合得很好。在此基础上,以4种不同粒径(96~180μm、180~380μm、212~380μm和380~830μm)的石英砂为介质,分别研究了甲烷水合物的p-T稳定条件。结果表明,实验测得的数据与纯水溶液中的结果基本一致,说明在实验所用的不同粒径石英砂构成的孔隙尺度内,毛细管作用对水合物相态点的影响可以忽略。     

河南省西峡县高庄金矿床地质特征及找矿前景

朱阳关-夏关断裂是一条长大于400km,深达上地幔的超壳断裂,沿断裂出露有较多的燕山期花岗岩（脉）体及一系列Cu、Au、Ag、Pb、Zn异常,有色金属、贵金属成矿作用明显。高庄金矿床赋存在朱阳关-夏关断裂次级断裂带中,为海底火山喷流-岩浆-构造热液叠加改造形成的含金石英脉-蚀变构造岩型金矿。本文分析了高庄金矿床特征,找矿标志。提出了在朱阳关-夏关断裂带中寻找金多金属矿床潜力较大。随着深部地质找矿的进一步开展,本区可成为我国重要的金多金属矿产基地。     

吉林延边地区浅成热液金(铜)矿床的~(40)Ar/~(39)Ar激光探针测年与成矿时代讨论

延边地区是中国东北部陆缘浅成热液金铜矿床发育的地区之一,广泛发育着浅成热液金矿床、中温热液金(铜)矿床和中深成中高温热液富金铜矿床(类斑岩型);富金铜矿床的成矿时代发生在105～102 Ma,为了进一步确定浅成热液金矿床与中深成中高温热液富金铜矿床的成矿动力学背景,采用流体包裹体的~(40)Ar/~(39)Ar激光探针定年法,对该区典型浅成热液金矿床进行了精细的年代学测定,获得刺猬沟金矿床、五星山金矿床和杜荒岭金矿床的脉石矿物石英流体包裹体的~(40)Ar/~(39)Ar等时线年龄分别为(141±7)Ma、(123±7)Ma和(107±6)Ma,其中刺猬沟金矿床((141±7)Ma)和五星山金矿床((123±7)Ma)的脉石矿物石英流体包裹体含有过剩放射性成因~(40)Ar,而杜荒岭金矿床((107±6)Ma)的脉石矿物石英流体包裹体几乎不含或含极少量过剩放射性成因~(40)Ar。结合最新获得的相关地质体的精细年代学成果,认定该区浅成热液金矿床成矿作用均发生在早白垩世晚期,或发生在早白垩世晚期火山喷发、浅成岩浆就位之后,其形成环境与富金铜矿床一致,为古太平洋板块向亚洲大陆正北向俯冲转入Izanagi-Farallon板块西向俯冲的构造转换期。     

胶东英格庄金矿床地质地球化学特征

英格庄金矿床是胶东牟平-乳山金矿成矿带重要的石英脉型金矿床之一,其产出和分布严格受NNE向断裂控制,围岩以古老变质岩和昆嵛山花岗岩为主,金矿物主要以晶隙金形式赋存于黄铁矿-脉石晶体之间。通过成矿流体包裹体地球化学研究可知:均一温度变化有3个峰值(155℃～165℃、205℃～215℃和245℃～265℃);该矿床包裹体盐度w(NaCl)较低(17.17(),在1.05(～17.17(之间变化,应属于低盐度流体;据其成矿压力21.3～58.8MPa,进一步求得的该矿床主要成矿深度为0.83～2.31km,为中浅成矿床;依据包裹体成分测试结果可知,矿床流体属K+-Na+-SO24-Cl-型。氢氧同位素显示其成矿流体主要来源于岩浆水和变质水,并有一定的大气降水混入。     

河南嵩县地区石英斑岩地质与地球化学特征研究

河南嵩县位于豫西熊耳山地区,区域内金矿床分布众多,发育地层以太古界太华群和中元古界熊耳群为主,岩石变质较深,构造变动强烈,岩浆活动频繁,燕山期大量中酸性岩浆侵入伴生了大量典型的小斑岩体,如石英斑岩。本文通过对研究区内石英斑岩的野外地质观察和室内化学分析研究认为:①石英斑岩相对于区内燕山期花岗岩体更偏酸性,TiO2、P2O5、MnO平均含量相对于区内燕山期花岗岩偏低;岩石富碱富钾质,属于钙碱性岩石系列,分离结晶作用进行的比较彻底,岩体形成时的氧逸度较高;据CIPW计算石英斑岩标准矿物主要矿物为石英、钠长石、钙长石、正长石,副矿物为透辉石、刚玉、紫苏辉石、钛铁矿、磁铁矿、磷辉石等,刚玉含量普遍相对较高;②石英斑岩Au含量相对于区域内太华群和熊耳群地层,以及区内五丈山、花山、合峪三大花岗岩体Au含量大大富集;与原始地幔相比具有强烈富集强不相容元素、弱不相容元素富集相对较弱;③雷门沟石英斑岩与区域内花山岩体各稀土元素含量及稀土元素各类特征参数非常接近,其它地区石英斑岩稀土总量较低,轻重稀土分馏不是很明显,除店房矿区的石英斑岩具有较明显的Eu正异常外,其它地区基本无Eu和Ce异常。     

Long-Term Observations of Isotope Ratio Accuracy and Reproducibility Using Quadrupole ICP-MS

High precision isotope ratio and trace element determination can be achieved with modern quadrupole ICP-MS provided that short and long-term instrument performance is accurately monitored. Here we present results for the isotope ratios ⁶Li/⁷Li, ¹⁴⁷Sm/¹⁴⁹Sm, ¹⁶⁰Dy/¹⁶¹Dy, ²⁰⁷Pb/²⁰⁶Pb, ²⁰⁸Pb/²⁰⁶Pb, ²⁰⁶Pb/²⁰⁴Pb and ²³⁵U/²³⁸U with which we determined long-term isotope ratio stability of relevance to both trace element and isotope determination. With respect to trace element determination, we first present long-term observations regarding oxide formation rates of Ba and Nd on light REE and heavy REE, as well as Zr on Ag. These showed good correlations and could be used to correct effectively the interference. The efficacy of this correction was demonstrated with analyses of the rock reference material BHVO-2 at both low and high oxide formation rates. Next, we studied the long-term reproducibility of a Dy isotope ratio that was measured to correct for the isobaric interference on Gd. It was found that, regardless of tuning condition, the ratio reproduced very well (0.58% RSD, 1s) and that the estimate of the Gd concentration did not suffer from the large correction (> 10%) caused by the Dy isobar. Long-term reproducibilities of Li, Sm and U isotope ratios, required for accurate mass bias correction when isotopically enriched internal standards of these elements are employed, were measured in the rock reference materials AGV-2 and JA-3 over a time period of up to 3 years. As expected, the Li isotope ratio showed the largest variability (RSD = 7%), but the other two ratios had relative external reproducibilities of only 1.01% (1s, U) and 0.67% (Sm). The mass bias-induced scatter in measurements for Sm and U was so small that the internal standard correction was effective, even for samples with high concentrations of these elements. With regard to Pb-isotope ratio determination, we also present long-term reproducibility for NIST SRM 982, run as an unknown and two accuracy tests for Pb separated from granitoids and from meteorites. It is demonstrated that the obtained ratios, including those involving ²⁰⁴Pb, are accurate relative to MC-ICP-MS determinations and of comparable precision to conventional TIMS analysis. The excellent agreement between all data sets shows the potential of modern quadrupole ICP-MS instrumentation for Pb-isotope determination, particularly for samples with very low Pb content.     

西藏尼玛盆地油页岩的发现及其地质意义

<正>青藏高原在长期复杂的演化过程中发育了一系列时代与类型不同的含油气盆地,但由于古生代以来冈瓦纳大陆裂解和特提斯洋的开启-闭合-造山作用的影响,特别是新生代以来印度-欧亚板块强烈碰撞造山和高原隆升作用的影响,含油气盆地受到了不同程度的改造,加之恶劣的自然环境,青藏高原成为中国目前油气地质研究和勘探程度最低的地区。     

黔东南与黔西南浊积岩中两种不同类型金矿的比较

黔西南和黔东南是贵州的两个主要产金地区,大部分金矿都产于浊积岩中。但黔西南的金矿主要是含金蚀变岩型（或称卡林型、微细浸染型）,以不可见金为主;黔东南的金矿却是含金石英脉型,以明金为主。这两种金矿都产在造山带,赋矿围岩是浊积岩,区内岩浆侵入作用不显著,成矿受背斜与断裂控制,成矿温度不高,矿石物质成分基本一致。研究表明,产生不同类型矿化的原因主要在于：黔东南地区的容矿岩石是浅变质的硅质碎屑岩,碳酸盐矿物很少;而黔西南地区是未变质的富钙硅质碎屑岩,碳酸盐矿物多。前者形成石英脉型金矿床,后者形成蚀变岩型金矿床。     

Precise and Accurate In Situ Determination of Lead Isotope Ratios in NIST,USGS, MPI‐DING and CGSG Glass Reference Materials using Femtosecond Laser Ablation MC‐ICP‐MS

Lead isotope ratio data were obtained with good precision and accuracy using a 266 nm femtosecond laser ablation (fLA) system connected to a multi‐collector ICP‐MS (MC‐ICP‐MS) and through careful control of analytical procedures. The mass fractionation coefficient induced by 266 nm femtosecond laser ablation was approximately 28% lower than that by 193 nm excimer laser ablation (eLA) with helium carrier gas. The exponential law correction method for Tl normalisation with optimum adjusted Tl ratio was utilised to obtain Pb isotopic data with good precision and accuracy. The Pb isotopic ratios of the glass reference materials NIST SRM 610, 612, 614; USGS BHVO‐2G, BCR‐2G, GSD‐1G, BIR‐1G; and MPI‐DING GOR132‐G, KL2‐G, T1‐G, StHs60/80‐G, ATHO‐G and ML3B‐G were determined using fLA‐MC‐ICP‐MS. The measured Pb isotopic ratios were in good agreement with the reference or published values within 2s measurement uncertainties. We also present the first high‐precision Pb isotopic data for GSE‐1G, GSC‐1G, GSA‐1G and CGSG‐1, CGSG‐2, CGSG‐4 and CGSG‐5 glass reference materials obtained using the femtosecond laser ablation MC‐ICP‐MS analysis technique.     

大宗急缺矿产和战略性新兴产业矿产调查工程进展与主要成果

钾盐是关乎国计民生的大宗急缺矿产; 稀有金属、稀土金属、稀散金属、萤石、晶质石墨、金刚石等矿产是国内外公认的战略性新兴矿产。根据国家建设的需求,2015年中国地质调查局设立了“大宗急缺矿产和战略性新兴产业矿产调查工程”。该工程以查明重要矿种的资源潜力,取得找矿突破为目标,以矿调为手段,以“五位一体”为部署原则,进行了全国重点地区大型资源基地和重要矿集区相关矿种的成矿规律和找矿方法创新研究,同时开展了矿产资源的综合利用研究。经过3年的努力已取得了一批找矿成果,丰富了成矿理论,创新了找矿方法,支撑了赣南、闽西等革命老区脱贫攻坚,带动了川西等地区的经济发展,对保障国家农业安全和战略性新兴产业顺利发展发挥了积极作用。概要介绍了在钾盐找矿、华南“三稀”金属矿产调查、川西大型锂矿资源基地建设、新疆奇台超大型晶质石墨矿找矿等方面取得的新进展; 介绍了在华南、华北、中西部等主要成矿带“三稀”矿产、晶质石墨、萤石等关键矿种成矿规律研究、成矿模式构建、资源潜力评价、重点靶区优选、技术方法组合等方面取得的成果; 介绍了在公益性基础性调查研究中所起到的示范引领作用。钾盐“二层楼”成矿模式和锂矿“五层楼+地下室层脉组合”成矿理论和找矿模型得以完善,新发现靶区40处,矿产地14处,大型资源基地2处,新增KCl资源量3.5亿t,伟晶岩型锂资源量31.75万t,铍资源量1.6万t,石墨资源量7 378万t,脉石英56万t,萤石1 159万t,金刚石资源量2.29万克拉,新增重稀土资源量12万t,含磷锂铝石岩体型锂资源量38万t。该工程取得的进展与成果对保障国家资源安全和战略性新兴产业的顺利发展具有重要的现实意义。