基于模型试验的泥石流坡面物源启动预警模型

为进一步探明银洞子沟物源区坡面物源启动机理与降雨的相关性,在进行详细的现场考察与工程勘察工作后选取了典型模型体,并采用20余组人工降雨物理试验方法将降雨强度与坡度设为控制变量,研究了4种坡形、5种雨强条件下,坡面松散物源的失稳机制及破坏模式。试验结果揭示了地表变形与地下物理力学参数变化的定量响应关系,并基于试验发生破坏的临界雨量,建立了银洞子沟传统I-D预警模型。之后提炼可靠预警参数(坡度、深部体积含水率),通过数学回归分析方法并采用Exponential模型,得出IGD、IGM多参数新型预警判别式,实现了传统I-D模型的有效修正,并具一定的可靠性和实用价值。     

粘结式锚杆在爆炸动载下轴向应力分布研究

通过物理模型试验,研究在爆炸动载作用下临近工作面支护锚杆的应力状态。根据相似条件和简化假设,采用集中装药进行工程掏槽爆破模拟,利用粘贴在锚杆上的应变片测得近区端锚和全锚锚杆的轴向应变波。测试结果表明,爆破引起锚杆振动时间约为6 ms,经过9 ms的缓降期锚杆变形趋于稳定值;动载期间端锚锚杆在杆体中部锚固段测得峰值应力比杆体尾部自由段的值大,但相差不大,动载过后尾部的残余应力较大;全锚锚杆在杆体尾部测得的峰值应力和残余应力都远大于杆体中部测得值。利用无限体内一点受法向集中力作用的位移势函数,推导锚固体及周围岩体的轴向应力分布,并计算一定预应力在锚固区产生的附加轴向应力,结合动应力的作用分析锚杆的受力状态     

卫星热红外遥感技术在火山区地热探测中的应用——以内蒙古锡林郭勒火山区为例

能源的全球性短缺以及全球环境问题的日益加剧,使得绿色新能源的研究与开发成为当今世界许多国家的一项重要任务。地热资源作为其中一员其重要性日益凸显。在地热资源的勘查中,传统的地质和地球物理勘探投入高、难度大,而遥感技术具有经济、高效、覆盖范围广等优势,已逐渐成为地热资源探测与调查的一种新技术手段。地热能开发的首选地区往往是新生代火山活动区,因其在相对较小的深度内就能获得很高的温度。本文综述了国内外利用遥感技术探测火山地热的发展历史和研究现状,介绍了这项技术在美国黄石公园、日本阿苏火山以及我国长白山火山和腾冲火山的应用。同时选取内蒙古锡林郭勒盟新生代火山活动构造区作为实例,利用美国NASA陆地卫星Landsat-7 ETM+第6波段的红外遥感数据反演了研究区的地表温度,结合ETM+7-4-1波段组合影像的地质构造解译结果以及其它相关资料对研究区地表温度分布进行了分析。结果表明,区内红外遥感地表温度异常区多位于北东东与北西向构造的交汇处或与环形构造密切相关。本文圈定了7个地表温度异常区作为这一地区下一步地热资源勘查的远景区。     

盆地模拟技术中的化学动力学生烃模型与应用

油气地表化探数据的失真(特别是数据中的高值失真点)直接影响到化探异常圈定。本文根据油气地表化探数据的分布特点，利用概率统计原理，提出一种适合油气化探资料前期处理的失真数据的概率判定方法和处理手段，在对实际资料的应用中，取得了良好的效果。     

Seismic fracture evaluation of diaphragm joints in welded beam-to-box column moment connections

Steel box columns are widely used in steel building structures in Taiwan due to their dual strong axes. To transfer the beam-end moment to the column, diaphragm plates of the same thickness and elevations as the beam flanges are usually welded inside the box column. The electro-slag welding (ESW) process is widely used to connect the diaphragms to the column flanges in Taiwan because of its convenience and efficiency. However, ESW may increase the hardness of the welds and heat-affected zones (HAZs), while reducing the Charpy-V notch strength in the HAZ. This situation can cause premature fracture of the diaphragm-to-column flange welds before a large plastic rotation is developed in the beam-to-box column joints. To quantify the critical eccentricity and the effectiveness of fracture prediction, this study uses fracture prediction models and finite element model (FEM) analysis to correlate the test results. In this study, two beam-to-box column connection subassembly tests are conducted with different loading protocols and ESW chamber shapes. To implement a fracture prediction model, the material parameters are established from circumferential notched tensile tests and FEM analysis. Test results indicate that the fracture instances can be predicted on the basis of the cumulative plastic deformation in the HAZs. Analytical results indicate that fracture instances and locations are sensitive to the relative locations of the ESW joints and beam flange. Tests also confirm that the possible fracture of the diaphragm-to-column flange joints can be mitigated by enlarging the chamber of the ESW joint.     

A model test system with a dynamic load device for geotechnical engineering in cold regions

A model test system with a dynamic load device for geotechnical engineering in cold regions is presented. This system consists of a model test tank, a refrigeration device and temperature controller, a dynamic load device, together with sensors and data loggers for detecting stress, deformation, and temperature changes. The system can accommodate soil blocks up to 3 m in length, 2.5 m in width, and 1 m in height. The lowest temperature provided by the refrigeration device is -20 °C. The maximum load provided by the dynamic load device is 100 kN and the vibration frequency of the dynamic load can range from 0.1 to 10 Hz. A number of waveforms, such as sine waves, rectangular waves, triangle waves, and other user-defined waves can be generated by the dynamic load device controller.     

L1范数与IQR统计量组合的GNSS坐标序列粗差探测算法

GNSS坐标时间序列中不可避免地含有粗差,未剔除的粗差将会导致参数估计有偏。因此,粗差探测与剔除是GNSS坐标序列分析中一项重要的数据预处理工作。针对GNSS坐标时间序列特点,提出了一种将L1范数(L1-norm)估计与四分位距统计量IQR(interquartile range)组合的移动开窗粗差探测算法,称之为L1_Mod IQR。该方法的主要思想是,首先利用L1范数估计得到较"真实"的残差,然后再对残差采用IQR统计量进行粗差探测。将L1_Mod IQR法与"3σ"法、基于最小二乘的τ检验法等粗差探测算法进行了模拟计算与对比,验证了该算法的有效性。进一步采用L1_Mod IQR算法对中国区域10个IGS站的高程时间序列进行了分析,结果表明中国区域IGS站高程序列的粗差剔除率最小为0.1%,最大为2.6%。并且以WUHN站为例与SOPAC提供的结果进行了对比,结果表明SOPAC提供的"Clean"数据仍含有大量的粗差,而L1_Mod IQR算法能够有效地剔除粗差。     

Sliding mode fuzzy control: Theory and verification on a benchmark structure

A sliding mode fuzzy control (SMFC) algorithm is presented for vibration reduction of large structures. The rule base of the fuzzy inference engine is constructed based on the sliding mode control, which is one of the non‐linear control algorithms. In general, fuzziness of the controller makes the control system robust against the uncertainties in the system parameters and the input excitation, and the non‐linearity of the control rule makes the controller more effective than linear controllers. For verification of the present algorithm, a numerical study is carried out on the benchmark problem initiated by the ASCE Committee on Structural Control. To achieve a high level of realism, various aspects are considered such as actuator–structure interaction, sensor noise, actuator time delay, precision of the A/D and D/A converters, magnitude of control force, and order of control model. Performance of the SMFC is examined in comparison with those of other control algorithms such as H_{mixed 2/∞}, optimal polynomial control, neural networks control, and SMC, which were reported by other researchers. The results indicate that the present SMFC is efficient and attractive, since the vibration responses of the structure can be reduced very effectively and the design procedure is simple and convenient. Copyright © 2000 John Wiley & Sons, Ltd.     

影响土的崩解特性因素初步研究

通过研究土的崩解特性进而指导工程施工,按《岩土工程勘察规范》对土的分类标准,对不同粒级分配的土样即砂土、黏粉、粉黏各选取两个代表性样品进行崩解特性试验,研究得出两点结论：（1）崩解过程开始时崩解速度较快,土样表面细小分散颗粒落入水中,此现象砂粉尤为明显,大量土体脱落,崩解速度极为快速。砂粉粒度程度较大,土的孔隙性和透水性较大,因此崩解速度较快,本次两个试样在近1h内完全崩解。黏粉试样含砂粉和粉黏,崩解速度处于砂粉及粉黏之间。而粉黏试样崩解时间较长,崩解过程较为缓慢,甚至几天都无法崩解;（2）崩解过程并不是一个规律的过程,跟土体的物理特性也有关系,且崩解过程中崩解方式不同,开始主要以粉末状和小碎块状为主,浸水时间较长后开始出现裂隙,随着裂隙的增大,期间伴随粉末状崩落,土体呈块状裂开,过程中不断有气泡逸出,水质浑浊。     

Characterization of beryl (aquamarine variety) from pegmatites of Minas Gerais,Brazil

Eight samples of the beryl variety aquamarine were selected from four pegmatites in the Governador Valadares and Araçuaí regions in northeastern Minas Gerais State, Brazil. These samples were fully characterized by chemical analysis, infrared and UV-visible spectroscopy, thermal analyses, and high-temperature X-ray diffraction (from room temperature up to 800 °C). Several physical and chemical properties of beryl were found to depend on the amount of water and ions residing in the structural channels. The thermal expansion coefficients from room temperature to about 800 °C are temperature-independent, with αa ? ?3.2 × 10^?6 ° C^?1 and αc ? ?8.7 × 10^?6 ° C^?1. The contraction of both a and c unit-cell parameters with increasing temperature and the shift of the infrared band centered at about 1200 cm^?1 were tentatively ascribed to interactions between channel water and the silicate rings.The color of beryl seems to be dictated by the relative proportions of Fe³⁺ in the octahedralsites and of fe²⁺ in the channels. Thus, deep-blue samples have little Fe³⁺, whereas greener samples have more Fe³⁺ or less channel Fe²⁺.