波浪作用下沙纹床面底层流动特性研究

涡动沙纹很大程度决定着床面阻力和波浪衰减,针对涡动沙纹作用下的绕流结构具有强二维特性,建立了立面二维曲线坐标下的数值模型.利用国外公开发表的试验数据进行验证,表明模型能模拟波浪作用下底层分离涡随时间、空间变化的动力特性,对底层流动的紊动特性、床面剪切应力的随时间、空间的变化以及涡动结构的尺度分别进行了讨论.     

乌鲁木齐10号泉流量变化的多尺度小波分析与异常识别

结合10号泉开始观测以来的震例，利用基于小波分析的多尺度分析原理对乌鲁木齐10泉流量的日均值观测序列进行了分析，总结了10号泉流量多尺度分析结果的映震特征。10号泉流量的地震前兆异常绝大多数是高值异常且具有较好的重复性，即一般都是在高值异常结束后几个月之内发生地震，个别情况下地震会发生在高值异常持续时段内。初步可以认定，利用基于小波变换的多尺度分析原理将流量数据分解成若干频段后，能够较好地识别和提取流量原始测值中不易分辨的震前异常。     

库尔勒数字地震台台基噪声分析

选取库尔勒地震台FBS—3数字地震仪不同时段的无震记录资料，运用傅里叶变换对其台基噪声进行频谱分析，并计算台基的平均噪声水平及仪器的实际动态范围。库尔勒地震台数字地震仪台基噪声主要来自随机干扰，噪声频段相对稳定，噪声幅度随时段有所变化。观测系统实际动态范围符合数字地震仪架设的要求。     

GPS技术应用于中国地壳运动研究的方法及初步结果

文中主要就中国利用GPS等空间测地资料研究地壳运动、构造变形 ,以及用于地震预测探索方面 ,从方法技术和近年来取得的一些初步结果进行了概要性论述。介绍了利用GPS技术资料研究地壳水平运动速度场、水平应变场、建立地壳运动模型等方法研究的进展。由GPS观测给出的地壳水平运动初步结果表明 :中国大陆现时水平运动在全球参考系中为整体向东 ,并兼有顺时针扭转运动。西部地区构造形变强烈 ,整个青藏块体及其边界带 ,以及新疆西部是应变值最高的区域 ,水平应变场主压应变优势分布方向为近NE向 ,空间差异显著 ,反映了印度板块碰撞推挤和青藏块体强烈构造运动的影响。中国大陆东部水平运动的差异性不显著。强震分布于地壳运动的大小、方向显著变化的区域 ,大地震通常发生在水平剪应变高值区或其边缘 ,尤其是与区域主干断裂的构造活动背景相一致的剪应变率高值区。     

中国大陆及其邻区强震活动与活动地块关系研究

从活动地块假说出发 ,在活动地块研究的基础上 ,探讨了中国大陆及邻区活动地块与强震活动的关系。研究指出 ,主要构造变形和强烈地震大都发生在活动地块边界。在占总面积 17%的活动地块边界上 ,集中了全部的 8级以上巨大地震和 86 %的 7级以上大地震 ,其释放能量占全部总能量的 95 %以上 ,表明中国大陆及其邻区活动地块边界带控制了绝大部分的强地震。从活动地块的整体来看 ,强震活动不仅显示出显著的韵律性特征 ,而且其高、低起伏基本上与中国大陆地区一致 ,只是强震活跃时段有时稍长于中国大陆。各轮回强震活动都有各自活动的主体地区 ,反映了不同活跃期内地块的不同活动方式。文中还从现今地壳运动角度 ,讨论了活动地块运动速率与强地震活动水平之间的可能联系。     

青海北祁连区中三叠世孢粉的发现及其意义

祁连县俄博乡土圈沟、大擦汗沟、柯柯里等剖面的粉砂岩、砂质页岩、泥质页岩岩层之中，首次发现丰富的孢粉化石，计39属74种(其中包括1新种)，疑源类8属9种。推出Verrucosisporites(8．6％)-Triadispora(2％)-Trematosphaeridium(7．2％)的孢粉组合。该孢粉组合面貌应归于中三叠世Anisian期。它的发现为该套地层的进一步研究与合理归属提供了最新成果。     

Exploration and Study on Deep Crust Structural Characteristics in the Jiashi-Artux Seismic Region

The data from two deep seismic sounding profiles was processed and studied comprehensively. The results show that crnst-mantle structures in the investigated region obviously display layered characteristics and velocity structures and tectonic features have larger distinction in different geological structure blocks. The boundary interface C between the upper and lower crust and Moho fluctuate greatly. The shallowest depths of C (30.0km) and Moho (45.5km) under Jiashi deepen sharply from Jiashi to the western Kunlun mountain areas, where the depths of C and Moho are 44.0km and 70.0km, respectively. The higher velocity structures in the Tarim massif determine its relatively “stable“ characteristics in crust tectonics. The phenomenon in the Jiashi region, where the distribution of earthquake foci mostly range from 20kin to 40kin in depth, may infer that the local uplift of C and Moho interface, anomalonsly lower velocity bodies and deep large faults control earthquake occurrence and seismogenic processes in the Jiashi strong earthquake swarm.     

Regional Stress Field and Seismic Dynamics Along the Border Zone Between Fujian, Guangdong and Jiangxi Provinces

The regional stress field and seismic dynamics along the border zone between Fujian, Guangdong and Jiangxi Provinces are studied based on the seismo-geological data, GPS measurement, and seismicity. The results show that: (1) the principal compressional stress of the stress field is oriented in NW-SE direction and the principal extensional stress is in NE-SW direction; (2) the WNW-ward compression and collision of the Philippine Sea Plate to the eastern coast of Taiwan Island are the most direct and most important dynamic source for preparation and occurrence of strong earthquakes in the Taiwan area and along the border zone between Fujian, Guangdong and Jiangxi Provinces.     

Aseismic negative dislocation model and deformation analysis of crustal horizontal movement during 1999——2001 in the northeast margin of Qinghai-Xizang block

Through numerical simulation for GPS data, aseism/c negative dislocation model for crustal horizontal movement during 1999-2001 in the northeast margin of Qinghai-Xizang block is presented, combined with the spatial distri-bution of apparent strain field in this area, the characteristics of motion and deformation of active blocks and their boundary faults, together with the place and intensity of strain accumulation are analyzed. It is shown that: a) 9 active blocks appeared totally clockwise motion from eastward by north to eastward by south. Obvious sinistral strike-slip and NE-NEE relative compressive motion between the blocks separated by Qilianshan-Haiyuan fault zone was discovered; b) 20 fault segments (most of them showed compression) locked the relative motion between blocks to varying degrees, among the total, the mid-east segment of Qilianshan fault (containing the place where it meets Riyueshan-Lajishan fault) and the place where it meets Haiyuan fault and Zhuanglanghe fault, more favored accumulation of strain. Moreover, the region where Riyueshan-Lajishan fault meets north boundary of Qaidam block may have strain accumulation to some degree, c) Obtained magnitude of block velocities and locking of their boundaries were less than relevant results for observation in the period of 1993-1999.     

Movement and strain conditions of active blocks in the Chinese mainland

The definition of active block is given from the angles of crustal deformation and strain. The movement and strain parameters of active blocks are estimated according to the unified velocity field composed of the velocities at 1598 GPS stations obtained from GPS measurements carried out in the past years in the Chinese mainland and the surrounding areas. The movement and strain conditions of the blocks are analyzed. The active blocks in the Chinese mainland have a consistent E-trending movement component, but its N and S components are not consistent. The blocks in the western part have a consistent N-trending movement and the blocks in the eastern part have a consistent S-trending movement. In the area to the east of 90°E, that is the area from Himalayas block towards NE, the movement direction of the blocks rotates clockwisely and the movement rates of the blocks are different. Generally, the movement rate is large in the west and south and small in the east and north with a difference of 3 to 4 times between the rates in the west and east. The distributions of principal compressive strain directions of the blocks are also different. The principal strain of the blocks located to the west of 90oE is basically in the SN direction, the principal compressive strain of the blocks in the northeastern part of Qingzang plateau is roughly in the NE direction and the direction of principal compressive strain of the blocks in the southeastern part of Qingzang plateau rounds clockwisely the east end of Himalayas structure. In addition, the principal strain and shear strain rates of the blocks are also different. The Himalayas and Tianshan blocks have the largest principal compressive strain and the maximum shear strain rate. Then, Lhasa, Qiangtang, Southwest Yunnan (SW Yunnan), Qilian and Sichuan-Yunan (Chuan-Dian) blocks followed. The strain rate of the blocks in the eastern part is smaller. The estimation based on the stain condition indicates that Himalayas block is still the area with the most intensive tectonic activity and it shortens in the NS direction at the rate of 15.2±1.5 mm/a. Tianshan block ranks the second and it shortens in the NS direction at the rate of 10.1±0.9 mm/a. At present, the two blocks are still uprising. It can be seen from superficial strain that the Chinese mainland is predominated by superficial expansion. Almost the total area in the eastern part of the Chinese mainland is expanded, while in the western part, the superficial compression and expansion are alternatively distributed from the south to the north. In the Chinese mainland, most EW-trending or proximate EW-trending faults have the left-lateral or left-lateral strike-slip relative movements along both sides, and most NS-trending faults have the right-lateral or right-lateral strike-slip relative movements along both sides. According to the data from GPS measurements the left-lateral strike-slip rate is 4.8±1.3 mm/a in the central part of Altun fault and 9.8±2.2 mm/a on Xianshuihe fault. The movement of the fault along the block boundary has provided the condition for block movement, so the movements of the block and its boundary are consistent, but the movement levels of the blocks are different. The statistic results indicate that the relative movement between most blocks is quite significant, which proves that active blocks exist. Himalayas, Tianshan, Qiangtang and SW Yunnan blocks have the most intensive movement; China-Mongolia, China-Korea (China-Korea), Alxa and South China blocks are rather stable. The mutual action of India, Pacific and Philippine Sea plates versus Eurasia plate is the principal driving force to the block movement in the Chinese mainland. Under the NNE-trending intensive press from India plate, the crustal matter of Qingzang plateau moves to the NNE and NE directions, then is hindered by the blocks located in the northern, northeastern and eastern parts. The crustal matter moves towards the Indian Ocean by the southeastern part of the plateau.