Tectonic Taphrogenesis and Paleoseismic Records from the Yishu Fault Zone in the Initial Stage of the Caledonian Movement

The Yishu fault zone (mid-segment of the Tanlu fault zone) was formed in the Presinian. Periodic tectonic activities and strong seismic events have occurred along the fault zone. During the initial stage of the Caledonian Movement, with the proceeding of the marine transgression from the Yishu paleo-channel to the western Shandong, uneven thick sediments, composed mainly of sand, mud and carbonates of littoral, lagoon, and neritic facies, were deposited in the Yishu fault zone and western Shandong, and constructed the bottom part of the Lower Cambrian consisting of the Liguan and Zhushadong formations. Through field observations and the lab-examinations, various paleoseismic records have been discovered in the Liguan Formation and the Zhushadong Formations of the Yishu fault zone and its vicinity, including some layers with syn-sedimentary deformation structures that were triggered by strong earthquakes (i.e. seismite, seismo-olistostrome, and seismo-turbidite). Paleoseismic records developed in the Zhushadong Formation are mainly seismites with soft-sediment deformation structures, such as liquefied diapir, small liquefied-carbonate lime-mud volcano, liquefied vein, liquefied breccia, convolute deformation (seismic fold), graded fault, soft siliceous vein, and deformation stromatolite, as well as seismites with brittle deformation structures of semiconsolidated sediments. Paleoseismic records preserved in the Liguan Formation are not only seismo-olistostrome with a slump fold, load structure, and ball-and-pillows, but also seismo-turbidite with convolution bedding, graded bedding and wavy-bedding. However, in the western Shandong area, the closer to the Yishu fault zone, the greater the thickness of the Liguan Formation and the Zhushadong Formation, the greater the number and type of layers with paleoseismic records, and the higher the earthquake intensity reflected by associations of seismic records. This evidence indicates that tectonic taphrogenesis accompanied by strong earthquake events occurred in the Yishu fault zone during the initial stage of the Caledonian Movement, which embodied the break-up of the Sino-Korean Plate along the Paleo-Tanlu fault zone at that time.     

西藏泽当蛇绿岩玄武岩SHRIMP锆石U-Pb年龄 及其地质意义

雅鲁藏布江缝合带中各蛇绿岩体的准确定年对待提斯洋演化和青藏高原隆升的研究具有重要意义.泽当蛇绿岩是雅鲁藏布江缝合带东段最大的蛇绿岩块体,关于其形成年龄目前仍存在不同的认识.通过SHRIMP锆石U-Pb测年得到蛇绿岩中玄武岩的形成年龄为154.9Ma±2.0Ma(95％置信度,MSWD=0.98).蛇绿岩中的玄武岩是洋脊扩张的产物,其形成年龄代表了扩张事件的时间,也代表了蛇绿岩的形成时代.结合已有的雅鲁藏布江缝合带蛇绿岩的形成年龄,该年龄进一步反映出雅鲁藏布江缝合带蛇绿岩形成时间具有东早西晚的特点.泽当蛇绿岩与含有埃达克质英云闪长岩的泽当岛弧火成岩基本为同期形成的.地球化学特征显示定年的玄武岩形成于俯冲带之上,且具有指示洋内俯冲环境的地球化学特征.因此,泽当SSZ型蛇绿岩可能形成于洋内俯冲机制.     

重塑硅藻土抗剪强度的环剪试验研究

硅藻土是一种强结构性土,具有密度小、孔隙大、干燥土块吸水率高等特点。天然硅藻土的抗剪强度大,但在外界扰动或风化后,结构性强度丧失,易发生滑坡等斜坡变形破坏现象,因此,研究其在大变形下的力学性质很有必要。利用环剪仪可以研究土体在较大剪切位移条件下抗剪强度变化规律,对重塑硅藻土进行环剪试验研究,得到了不同竖向压力下的应力-位移曲线,认为重塑硅藻土为典型的应变软化型土;根据测试结果得到了重塑硅藻土的抗剪强度和残余强度,并从物质组成和微观结构特征方面对重塑硅藻土的力学性质进行了分析,为硅藻土滑坡的成因分析和灾害防治提供了依据。     

陕西镇安县桂林沟钼矿成矿特征及成矿要素分析

潼关—柞水—宁陕区域性北东向构造岩浆岩带控制了矿区岩浆岩体、矿区构造和钼矿化带的产出及其规模,矿区次级断裂构造为成矿物质聚集提供了有利的储存空间,中酸性岩浆活动及其热液蚀变控制了成矿物质的迁移、富集.区域性北东向构造岩浆岩带具有良好的找矿前景,应引起相关矿产勘查工作的高度重视.     

超长灌注桩桩-土界面剪切模型及其有限元模拟

由于超长灌注桩为摩擦型桩,建立合适的桩-土界面剪切模型将成为合理且有效地模拟分析其承载变形特性的关键。基于超长灌注桩桩侧摩阻力? 随桩-土相对位移w发挥性状,将? - w关系定义为硬化和软化两种类型,进而将桩侧摩阻力发挥模式分为全硬化模式、全软化模式和混合模式。建立超长灌注桩桩-土界面剪切硬化模型和软化模型,运用ABAQUS二次开发子程序FRIC将建立的剪切模型嵌入有限元,实现剪切模型的有限元模拟,单桩算例表明,剪切模型在ABAQUS中实现是成功的。运用建立的桩-土界面剪切模型对现场试验试桩进行有限元模拟,模拟结果与实测结果较为吻合,表明所建立的桩-土界面剪切模型及其有限元模拟对于超长灌注桩承载变形计算具有合理性和可行性。     

Garnet crystal plasticity in the continental crust,new example from south Madagascar

Garnet (10 vol.%; pyrope contents 34–44 mol.%) hosted in quartzofeldspathic rocks within a large vertical shear zone of south Madagascar shows a strong grain‐size reduction (from a few cm to ～300 μm). Electron back‐scattered diffraction, transmission electron microscopy and scanning electron microscope imaging coupled with quantitative analysis of digitized images (PolyLX software) have been used in order to understand the deformation mechanisms associated with this grain‐size evolution. The garnet grain‐size reduction trend has been summarized in a typological evolution (from Type I to Type IV). Type I, the original porphyroblasts, form cm‐sized elongated grains that crystallized upon multiple nucleation and coalescence following biotite breakdown: biotite + sillimanite + quartz = garnet + alkali feldspar + rutile + melt. These large garnet grains contain quartz ribbons and sillimanite inclusions. Type I garnet is sheared along preferential planes (sillimanite layers, quartz ribbons and/or suitably oriented garnet crystallographic planes) producing highly elongated Type II garnet grains marked by a single crystallographic orientation. Further deformation leads to the development of a crystallographic misorientation, subgrains and new grains resulting in Type III garnet. Associated grain‐size reduction occurs via subgrain rotation recrystallization accompanied by fast diffusion‐assisted dislocation glide. This plastic deformation of garnet is associated with efficient recovery as shown by the very low dislocation densities (10¹⁰ m^?3 or lower). The rounded Type III garnet experiences rigid body rotation in fine‐grained matrix. In the highly deformed samples, the deformation mechanisms in garnet are grain‐size‐ and shape‐dependent: dislocation creep is dominant for the few large grains left (>1 mm; Type II garnet), rigid body rotation is typical for the smaller rounded grains (300 μm or less; Type III garnet) whereas diffusion creep may affect more elliptic garnet (Type IV garnet). The P–T conditions of garnet plasticity in the continental crust (≥950 °C; 11 kbar) have been identified using two‐feldspar thermometry and GASP conventional barometry. The garnet microstructural and deformation mechanisms evolution, coupled with grain‐size decrease in a fine‐grained steady‐state microstructure of quartz, alkali feldspar and plagioclase, suggests a separate mechanical evolution of garnet with respect to felsic minerals within the shear zone.     

昆中断裂带南北陆块基底、盖层沉积、岩浆岩对比研究——昆中断裂带构造意义的讨论

本文依据1∶25万区域地质调查成果资料,从昆中断裂带对南北两侧的基底变质岩系(包括变基性火山岩、变泥质岩)、表壳盖层沉积岩系、前寒武纪长英质火成侵入岩以及镁铁-超镁铁质侵入岩的沉积建造、岩石类型组合、岩石地球化学及所反映的源岩物性的控制,系统对比讨论了昆中断裂带南北两侧基底陆块特征及昆中断裂带的构造属性。得出以昆中断裂带为界,南北两侧陆块的大陆岩石圈,无论在表壳沉积岩系、中-下地壳和地幔的层性和物性结构及地球化学成分都存在显著差异。从而提出昆仑造山带实际上是个两陆块碰撞复合陆缘造山带。在元古宇以前南北陆块并非属同一古陆块,或者说昆中断裂带为欧亚大陆和冈瓦纳大陆的真正分界或二者的拼合带。     

陕西澄合矿区中深部4号煤层厚度变化原因

陕西渭北石炭-二叠纪煤田澄合矿区4号煤层是区内主要可采煤层之一。通过对区内煤层厚度与其上覆煤系厚度、煤中灰分、硫分及煤层顶板岩性-岩相等因素的相关性分析,结合4号煤层成煤期与聚煤期后环境分析,探讨了研究区及其周缘地区4号煤层厚度变化原因。结果显示:4号煤层厚度与上覆煤系厚度、煤中灰分及硫分均呈正相关关系,相关系数分别为0.810 1、0.430 9、0.813 6;该煤层发育于浅水型三角洲沉积体系的三角洲平原地带;煤层厚度变化受控于聚煤期同沉积构造和聚煤期后河流冲蚀作用的双重影响,前者使煤层厚度变化较小,后者对煤层厚度影响较大,甚至出现无煤带。     

辽宁阜新排山楼金矿南带找矿方向探讨

排山楼金矿赋存于太古宇建平群片麻岩与元古宇长城系大红峪组砂岩、高于庄组白云岩之间的东西向韧性剪切带中,为大型同韧性剪切带型金矿床.在排山楼金矿南带十家子一带发现,与排山楼金矿赋存于相应层位中的含金韧性剪切带层序倒转,含金韧性剪切带层位由处于高于庄组白云岩层之下变为在白云岩层之上,找矿方向和重点由此发生了根本改变.     

四川稻城竹鸡顶铜矿地质特征及成矿特点

竹鸡顶斑岩型铜矿位于西南三江成矿带内,热液蚀变以青磐岩化、泥化为特征。区内现已圈出1个矿带和2个矿化带,并有幅频激电异常、土壤铜异常与之套合。该区具有较好的找矿前景。