构造应力环境对浅成岩体成矿系统的制约:从安庆月山岩体冷却过程动力学计算模拟结果分析

为探讨构造应力环境对浅成岩体成矿系统的制约,以安庆地区的月山岩体及其所形成的安庆铜矿床为例,在传统地质调查研究的基础上,通过假设不同的力学边界条件进行岩体冷却过程动力学的计算模拟实验研究。计算结果显示,在没有构造应力作用时,在岩体的接触带上不可能形成有利成矿定位的局部汇流扩容空间,挤压和拉伸作用都能够在岩体接触带形成局部汇流扩容空间,但二者的空间分布规律有着极大的差别,只有拉伸构造应力作用下的动力学计算模拟实验能在已发现矿体部位形成汇流扩容空间,表明构造应力环境对成矿定位的汇流空间的制约以及拉伸构造应力作用对月山岩体成矿的重要贡献。在拉伸构造应力和无构造应力作用时,接触带上的流体压力都是随着变形的进程而趋降低的,只有在挤压构造应力作用下,流体压力才会有一个超压的过程,流体超压是形成斑岩型矿床的重要机制。可见挤压环境才是一种有利于斑岩型矿床成矿的构造环境,铜陵-安庆地区缺乏与矽卡岩矿床相对应的斑岩型矿床主要原因之一是成矿时处于一种拉伸的构造应力作用环境。     

西藏西部措勤盆地措勤-洞错重、磁剖面的地质结构

为研究西藏措勤—洞错地区的地质结构,对2006年采集的1:50000重、磁剖面资料进行了分析、处理、曲线拟合计算与解释。结果表明,南端冈底斯基底走滑断隆带古生界褶皱基底很浅,缺失中生界;中部措勤盆地则埋深较大,最深可达9km,并表现为北深南浅的格局,主要充填了巨厚的中生界;北部班公湖-怒江缝合带的基底深度小于3km;剖面上羌塘地体的基底深度约3.5km。剖面中部措勤盆地北部坳陷与班公湖-怒江缝合带结晶基底磁性弱,北部和南部结晶基底磁性强。推断了12条断裂,其中F7断裂为措勤盆地北界,F1断裂为盆地南界。推断了6个花岗岩类岩体、2个蛇绿岩体及一套规模较大的火山岩,并描述了其地下赋存的特征。     

内蒙古高原中东部地区137Cs背景值的确定方法(英文)

In isotope 137 Cs tracing studies, it is a premise to determine suitable 137 Cs reference inventory(CRI) plots and the CRI values. Owing to the heterogeneous spatial distribution of 137 Cs deposition in the ground and diverse, or even irregular, operations in sampling and testing procedures, CRI determination is usually faced with many difficulties and uncertainties. In addition, more difficulties occur in an investigation of a large-scale region because of time constraints and measurement cost limitations. In this study, traditional CRI acquiring methods were summarized first, and then a new complex scheme was established, involving seven core steps and coupling the model estimate and sample measurement. The above CRI determination methodology was implemented in the central-eastern Inner Mongolia Plateau. The case study results showed that the CRI in the dark chestnut soil sub-region, located in the east and south of Xing'an City, exhibited 2447 Bq·m–2; the CRI in the aeolian sandy soil sub-region, positioned in the south central Tongliao City and central Chifeng City, showed 2430 Bq·m–2; the CRI in the sandy chernozem soil sub-region, situated in the northwestern Chifeng City, presented 2384 Bq·m–2; and the CRI in the chestnut soil sub-region, in the southern Xilin Gol City, was 2368 Bq·m–2. The newly proposed CRI determination scheme was proved effective, and the determined CRI plots and CRI values were convincing. The methodology offered a framework for 137 Cs tracing studies in large-scale regions or long-distance transects.     

REDD+ readiness process in Cameroon: an analysis of multi-stakeholder perspectives

Cameroon has been a keen participant in Reducing Emissions from Deforestation and Forest Degradation plus conservation, sustainable management of forests and enhancement of carbon stocks (REDD+) negotiations since 2005 and has engaged in activities to enhance the implementation of REDD+. This article reviews progress on REDD+ readiness in Cameroon based on a multiple REDD+ functions framework. Results show that some progress has been made in terms of planning and coordination, institutional development, and the development of some REDD+ projects. Absence of a legal framework, inadequate procedures for stakeholder participation, slow progress in the development of a national strategy, monitoring, reporting, and verification (MRV) challenges, and weak financing remain prominent constraints. Despite having one of the slowest REDD Readiness Preparation Proposal (R-PP) processes in the Congo Basin, stakeholders feel strong ownership because the R-PP was done almost entirely by Cameroonian experts. Some opportunities for improving REDD+ can be considered going forward, including the establishment of procedures for a broader participatory process, speeding up the operationalization of the National Observatory on Climate Change, making use of the ongoing forestry law reform, consideration of a carbon concessions concept, tapping from international initiatives to build on MRV, and improving benefit sharing and financing through the development of an appropriate and decentralized mechanism. Enhancing these opportunities is fundamental for successful REDD+ implementation in Cameroon.

Policy relevance

This article offers a new multidimensional approach to assessing the REDD+ readiness process in Cameroon. This critical assessment, which is done using six key functions, provides an opportunity for enhanced understanding of the process by policy makers, decision makers, and professionals with a view to enabling improvements in the readiness process. Furthermore, the article proffers a series of opportunities that the government and other relevant stakeholders can capitalize on to overcome current hurdles affecting the REDD+ readiness process. It is hoped that policy makers driving the REDD+ process in Cameroon will be able to incorporate the findings of this research into their strategic policy, formulated to advance the REDD+ readiness process. More importantly, it is hoped that the multidimensional framework applied in this study could be useful for assessing REDD+ in similar contexts in the Congo Basin.     

定向岩芯构造分析及在金矿勘查中的运用

系统测量定向岩芯中构造面的α角和β角,结合钻孔的方位角和钻孔倾角,通过赤平投影可以还原真实的构造面产状.通过穿过金矿体的定向岩芯的构造编录和系统分析,计算矿体中的主要含矿节理、含矿蚀变带等构造面的产状,并进行统计分析,可以了解矿化与各类构造之间的关系,计算矿体的空间产状,并推断主矿体的延伸等,为矿区的深部勘查设计提供依据.     

山东大地构造相研究方法划分方案与基本特征

在系统收集山东已完成的1∶5万、1∶20万和1∶25万区域地质资料基础上,通过编制山东省1∶25万实际材料图和建造构造图、1∶50万大地构造相五要素工作底图和1∶50万大地构造相图,全面介绍了大地构造相的定义、研究内容、指导思想、基本原则与编图程序。采用大地构造相编图作为大陆动力学研究的主要方法,是揭示不同陆块之间相互作用、形成过程和演化历史、研究山东大陆块体离散、会聚、碰撞、造山的大陆动力学过程的主要载体和具体表达形式。进而对山东大地构造相进行了划分,共划出华北陆块区、秦祁昆造山系和中国东部陆缘弧盆系相系3大相系,鲁西陆块、渤海陆块、大别苏鲁结合带、威海弧盆系、胶辽岩浆弧和华北裂谷盆地6个大相以及20个相和59个亚相,明确了其鉴别标志。对陆块区、造山系和陆缘弧盆系相系以及大相、相的基本特征进行了描述;简要总结了大地构造相与成矿尤其是金矿的关系,探讨了不同矿床与大地构造相的成因联系。     

山东省沉积岩建造组合划分

为编制1∶50万山东省大地构造相工作底图（沉积岩区）提供依据,按照沉积岩建造组合划分原则和大地构造相研究的有关要求,划分了山东省沉积岩区大地构造相和沉积岩建造组合,将山东省沉积岩区大地构造相划分为2个相系（Ⅰ级）、3个大相（Ⅱ级）、15个相（Ⅲ级）、27个亚相（Ⅳ级）及40个建造组合（Ⅴ级）,并简要介绍了主要沉积岩建造组合基本特征。     

青海东昆仑哈日扎多金属矿区构造活动的锆石裂变径迹定年分析

青海省哈日扎多金属矿区位于东昆仑东段,属东昆中多旋回岩浆弧带,是新的矿产勘查基地,成矿作用主要受NE和NW向两组构造蚀变带控制。本文通过不同类型样品的锆石裂变径迹定年分析,探讨区内的构造活动。所获得的10个样品年龄为116~204 Ma,并由3个组年龄构成,即204~181 Ma,142~168 Ma和116~120 Ma。第1组年龄204~181 Ma反映印支晚期三叠纪末羌塘地块与昆仑地块碰撞的地质事件及其时限;后两组年龄主要是晚侏罗世~早白垩世冈底斯地体向北与羌塘地体碰撞汇聚的响应,活动时限为168~116 Ma。第2和3组年龄同时表明本区燕山期构造活动存在强度差异,即有两个强作用期。同时,3组年龄也揭示本区具有多期次成矿活动。     

A paleomagnetic and magnetic fabric study of the Illapel Plutonic Complex,Coastal Range,central Chile: Implications for emplacement mechanism and regional tectonic evolution during the mid-Cretaceous

The Illapel Plutonic Complex (IPC), located in the Coastal Range of central Chile (31°–33° S), is composed of different lithologies, ranging from gabbros to trondhjemites, including diorites, tonalites and granodiorites. U/Pb geochronological data shows that the IPC was amalgamated from, at least, four different magmatic pulses between 117 and 90 Ma (Lower to mid-Cretaceous). We present new paleomagnetic results including Anisotropy of Magnetic Susceptibility (AMS) from 62 sites in the plutonic rocks, 10 sites in country rocks and 7 sites in a mafic dyke swarm intruding the plutonic rocks.Remanent magnetizations carried by pyrrhotite in deformed country rock sediments nearby the intrusive rocks indicate that tilting of the sedimentary rocks occurred prior or during the intrusion. The paleomagnetic study shows no evidence for either a measurable tilt of the IPC or a significant rotation of the forearc at this latitude range. Moreover, new ⁴⁰Ar/³⁹Ar ages exclude any medium- to low-temperature post-magmatic recrystallization/deformation event in the studied samples. AMS data show a magnetic foliation that is often sub-vertical. Despite an apparent N–S elongated shape of the IPC, the large variations in the orientation of the AMS foliation suggests that this plutonic complex could be made of several units distributed in a N–S trend rather than N–S elongated bodies.Previous works have suggested for this area a major shift on tectonic evolution from highly extensional during Lower Cretaceous to a period around 100 Ma, associated with exhumation and compressive deformation to conform the present day Coastal Range. The low degree of anisotropy and the lack of evidence for a tectonic fabric in the intrusive rocks indicate that the shift from extensional to compressional should postdate the emplacement of the IPC, i.e. is younger than 90Ma.     

Andean earthquakes triggered by the 2010 Maule,Chile (Mw 8.8) earthquake: Comparisons of geodetic,seismic and geologic constraints

The Maule, Chile, (M_w 8.8) earthquake on 27 February 2010 triggered deformation events over a broad area, allowing investigation of stress redistribution within the upper crust following a mega-thrust subduction event. We explore the role that the Maule earthquake may have played in triggering shallow earthquakes in northwestern Argentina and Chile. We investigate observed ground deformation associated with the M_w 6.2 (GCMT) Salta (1450 km from the Maule hypocenter, 9 h after the Maule earthquake), M_w 5.8 Catamarca (1400 km; nine days), M_w 5.1 Mendoza (350 km; between one to five days) earthquakes, as well as eight additional earthquakes without an observed geodetic signal. We use seismic and Interferometric Synthetic Aperture Radar (InSAR) observations to characterize earthquake location, magnitude and focal mechanism, and characterize how the non-stationary, spatially correlated noise present in the geodetic imagery affects the accuracy of our parameter estimates. The focal mechanisms for the far-field Salta and Catamarca earthquakes are broadly consistent with regional late Cenozoic fault kinematics. We infer that dynamic stresses due to the passage of seismic waves associated with the Maule earthquake likely brought the Salta and Catamarca regions closer to failure but that the involved faults may have already been at a relatively advanced stage of their seismic cycle. The near-field Mendoza earthquake geometry is consistent with triggering related to positive static Coulomb stress changes due to the Maule earthquake but is also aligned with the South America-Nazca shortening direction. None of the earthquakes considered in this study require that the Maule earthquake reactivated faults in a sense that is inconsistent with their long-term behavior.